Publications & Works

Published journal articles indexed by SCI, SSCI, and AHCI

A Numerical Investigation of Heat Transfer from Heated Surfaces of Different Shapes

JOURNAL OF ENGINEERING THERMOPHYSICS, vol.30, no.3, pp.494-507, 2021 (Journal Indexed in SCI) Creative Commons License identifier identifier

Effect of Arc Shaped Bar on Heat Transfer and Fluid Characteristics at Cooling of Electronic Equipment

JOURNAL OF ENGINEERING THERMOPHYSICS, vol.29, no.4, pp.657-673, 2020 (Journal Indexed in SCI) Creative Commons License identifier identifier

Numerical analysis of heat transfer due to slot jets impingement onto two cylinders with different diameters

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, vol.39, no.5, pp.726-735, 2012 (Journal Indexed in SCI) identifier

Simulation of Jet Drying of a Moist Cylinder at Low Reynolds Number

DRYING TECHNOLOGY, vol.30, no.6, pp.631-640, 2012 (Journal Indexed in SCI) identifier identifier

Control of heat transfer and fluid flow using a triangular bar in heated blocks located in a channel

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, vol.36, no.8, pp.878-885, 2009 (Journal Indexed in SCI) identifier identifier

Articles Published in Other Journals

Numerical Investigation of The Effect of Impeller Blade Angle for Stirred Tank

SAKARYA UNIVERSITY JOURNAL OF SCIENCE, vol.26, no.2, pp.397-409, 2022 (Refereed Journals of Other Institutions)

Jet Giriş Genişliğinin Isı Transferi ve Akış Yapısına Olan Etkisinin Araştırılması

Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi, vol.36, no.2, pp.331-345, 2021 (Other Refereed National Journals)

Study of cooling of the varied designed warmed surfaces with an air jet impingement

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, vol.26, no.1, pp.88-98, 2020 (Journal Indexed in ESCI) Creative Commons License Sustainable Development identifier

Investigation of Air jet Impingement Drying with Forced Convection of Moist Things

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, vol.25, no.4, pp.387-395, 2019 (Other Refereed National Journals) Creative Commons License identifier

Investigation of Heat Transfer from Heated Square Patterned Surfaces in a Rectangular Channel with an Air Jet Impingement

European Journal of Engineering and Natural Sciences, vol.3, no.1, pp.78-86, 2019 (Refereed Journals of Other Institutions)

Hava Jeti Çarpmalı Kurutma için Farklı Dairesel Nemli Nesne Geometrilerinin Isı ve Kütle Transferi Üzerindeki Etkisinin Araştırılması

Uludağ University Journal of The Faculty of Engineering, vol.24, no.1, pp.51-62, 2019 (Other Refereed National Journals) Creative Commons License

Study of the Effects of Location Angles for Semi Spheres on the Heat Transfer and Flow Structure in Converging-Diverging Channels

EJONS International Journal on Mathematic, Engineering and Natural Sciences, vol.7, no.3, pp.1-15, 2019 (Refereed Journals of Other Institutions)

Daralan ve Genişleyen Bir Kanal İçerisine Yerleştirilen Yarım KürelerÜzerinden Akış ve Isı Transferinin Sayısal Olarak Araştırılması

Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, vol.33, no.4, pp.225-240, 2018 (Other Refereed National Journals)

Numerical Investigation of Flow and Heat Transfer on Semi Spheres In Placed a Converging and Diverging Channel

Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, vol.33, no.4, pp.225-240, 2018 (Other Refereed National Journals)

Numerical Analysis of Flow and Heat Transfer for Semi Spheres Placed As Multiple Serials In a Channel

European Mechanical Science, vol.2, no.3, pp.76-82, 2018 (Refereed Journals of Other Institutions) Creative Commons License

The Investigation of Velocity and Temperature Changes by CFD Analysis for Intake Stroke of LPG Fuel Stratified Charge Engine

International Journal of AutomotiveEngineering and Technologies, vol.6, no.2, pp.61-69, 2017 (Refereed Journals of Other Institutions)

Farklı Geometriye Sahip Kavitelerdeki Akış ve Sıcaklık Dağılımının Sayısal Olarak İncelenmesi

Afyok Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, 2016 (Other Refereed National Journals) Sustainable Development

Farklı Geometrilere Sahip Olan Binalararda Akış Yapılarının Sayısal ve Deneysel Olarak İncelenmesi

Isıtma, Soğutma, Havalandırma, Klima, Yangın ve Sıhhi Tesisat Dergisi, 2015 (Other Refereed National Journals)

Refereed Congress / Symposium Publications in Proceedings

A STUDY ON INCREASE COOLING CAPACITY OF MICROCHIPS WITH COMBINED JET FLOW

13th INTERNATIONAL CONFERENCE ON ENGINEERING & NATURAL SCIENCES, Burdur, Turkey, 19 - 20 March 2022, pp.117-130 Sustainable Development

INVESTIGATION OF THE COMBINED JET FLOW EFFECT ON FLOW AND HEAT TRANSFER APPLICATION IN THE CHANNEL

13th INTERNATIONAL CONFERENCE ON ENGINEERING & NATURAL SCIENCES, Burdur, Turkey, 19 - 20 March 2022, pp.131-144 Sustainable Development

MİKROÇİP ELEKTRONİK DEVRE ELEMANLARINDAKİ ISI TRANSFERİNİN BİRLEŞİK JET ETKİSİYLE İYİLEŞTİRİLMESİ

INTERNATIONAL EUROASIA Congress on Scientific Researches and Recent Trends 9, Antalya, Turkey, 18 February 2022, vol.1, pp.557-572 Sustainable Development

INCREASING THE HEAT TRANSFER FROM MICROCHIPS WITH DIFFERENT PATTERN SURFACE DEPENDING ON THE FIN ANGLE IN THE CHANNEL BY USING IMPINGING JET-CROSS FLOW

HAGIA SOPHIA 4. INTERNATIONAL CONFERENCE ON MULTIDISCIPLINARY SCIENTIFIC STUDIES, İstanbul, Turkey, 11 - 13 February 2022, pp.2-17 Sustainable Development

COOLING OF CIRCUIT ELEMENTS WHOSE TEMPERATURES INCREASED DEPENDING ON THE FIN POSITIONS IN AN IMPINGING JET-CROSS FLOW CHANNEL

İSTANBUL INTERNATIONAL MODERN SCIENTIFIC RESEARCH CONGRESS -II, İstanbul, Turkey, 23 - 25 December 2021, vol.1, pp.665-679

INVESTIGATION OF THE VARIATION OF COOLING PERFORMANCE WITHTHE CHANNEL HEIGHT IN A CHANNEL HAVING IMPINGING JET-CROSSFLOW

12th INTERNATIONAL CONFERENCE ON ENGINEERING & NATURAL SCIENCES, Bingöl, Turkey, 24 - 25 December 2021, pp.274-291 Creative Commons License Sustainable Development

THE EFFECT OF FIN ANGLE ON INCREASING THE HEAT TRANSFER FROM ELECTRONIC COMPONENTS BY APPLYING AN IMPINGING JET-CROSS FLOW

ISPEC INTERNATIONAL CONGRESS ON MULTIDISCIPLINARY STUDIES, Adana, Turkey, 12 November 2021, no.1, pp.621-635

Elektronik Bileşenlerden Olan Isı Transferinin Çarpan Jet - Çapraz Akış Uygulanarak Artırılmasında Kanatçık Açısının Etkisi

ISPEC INTERNATIONAL CONGRESS ON MULTIDISCIPLINARY STUDIES, Adana, Turkey, 12 - 13 November 2021, vol.1, pp.621-635

Geriye Dönük Adım Akışında Adım Geometrisinin Isı Transferi ve Akış Yapısı Üzerindeki Etkisinin İncelenmesi

4th International Symposium on Innovative Approaches in Engineering and Natural Sciences, Samsun, Turkey, 22 - 24 November 2019, vol.4, pp.373-383

Karbon Nanotüp Nanoakışkanının Geriye Dönük Adım Akışında Isı Transferi ve Akış Karakteristiğinin Araştırılması

4th International Symposium on Innovative Approaches in Engineering and Natural Sciences, Samsun, Turkey, 22 - 24 November 2019, vol.4, pp.363-372

Plakalı Isı Değiştiricilerde Kanatçık Tasarımının Isı Transferi Açısından Değerlendirilmesi

4th International Energy Engineering Congress, Gaziantep, Turkey, 24 - 25 October 2019, pp.880-898

Çarpan Hava Jeti Kullanılarak Isınmış Yüzeylerden Olan Isı Transferinin İncelenmesi

4th International Energy Engineering Congress, Gaziantep, Turkey, 24 - 25 October 2019, pp.899-912

Hava Jeti Çarpması İle Yüzey Soğutmanın İncelenmesi

The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia/TURKEY (IMSMATEC 2019), Ürgüp/Nevşehir, Turkey, 21 - 23 June 2019, pp.288-293

Jet Akışı İle Yüzeylerdeki Isı Transferinin İncelenmesi

The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia/TURKEY (IMSMATEC 2019), Ürgüp/Nevşehir, Turkey, 21 - 23 June 2019, pp.294-299

Flow Analysis on Cylinder Geometries Designed with Different Spiral Steps

Third International Mediterranean Congress on Natural Sciences,Health Sciences and Engineering (MENSEC III), Podgorica, Serbia And Montenegro, 18 - 20 June 2019

Çarpan Jet Akışı Kullanılarak Soğutulan Yüzeylerde Desen Açısının Isı Transferi ve Akış Üzerindeki Etkisinin İncelenmesi

Anadolu I. Uluslararası Multidisipliner Çalışmalar Kongresi, Diyarbakır, Turkey, 28 - 29 December 2018, pp.1403-1423

Farklı Şekillere Sahip Yüzeylerde Jet Akışın Isı Transferi ve Akış Yapısı Üzerindeki Etkisinin Araştırılması

2nd International Symposium on Innovative Approaches in Scientific Studies-ISAS 2018-Winter, Samsun, Turkey, 30 November - 02 December 2018, vol.3, pp.1195-1204

Investigation of the Heat Transfer and Flow Characteristic According to Placement Angles of Semi Spheres In Converging-Diverging Channels

1. International Technological Sciences and Design Symposium-ITESDES 2018, Giresun, Turkey, 27 - 29 June 2018, pp.1119-1136

NUMERICAL INVESTIGATION OF MIXING in a STIRRED TANK by DIFFERENTTYPES of RADIAL and AXIAL IMPELLERS

3rd International Energy Engineering Congress Proceedings Book18-19 October 2018, Gaziantep University, Turkey, 18 - 19 October 2018, pp.1007-1019

Desenli Yüzeylerde Hava Jeti Akışı için Taşınım Isı Transferi ve Akış Özelliklerinin İncelenmesi

II. International and Scientific and Vocational Studies-Engineering and National Sciences-BILMES 2018, Nevşehir, Turkey, 5 - 08 July 2018, pp.845-868

Investigation of Heat Transfer from Heated Square Patterned Surfaces in a Rectangular Channel with an Air Jet Impingement

ICENS 4th International Conference On Engineering and Natural Science, Kiev, Ukraine, 2 - 06 May 2018, pp.367-376

Analysis of Cooling of the Heated Circle Patterned Surfaces by Using an Air Jet Impingement

ICENS 4th International Conference on Engineering and Natural Science, Kiev, Ukraine, 2 - 06 May 2018, pp.411-420

Study of the Effects of Location Angles for Semi Spheres on the Heat Transfer and Flow Structure in Converging-Diverging Channels

EJONS International Congress on Mathematic, Engineering and Natural Sciences-III, Mardin, Turkey, 21 - 22 April 2018

Numerical Investigation of Flow and Heat Transfer on Semi Sphere in a Channel

International Advanced Researches Engineering Congress-2017, 16 - 18 November 2017, pp.636-643

Kanal İçerisine Yerleştirilen Yarım Küre Üzerindeki Akış ve Isı Transferinin Sayısal Olarak İncelenmesi

IAREC’17 International Advanced Researches Engineering Congress-2017, Osmaniye, Turkey, 16 - 18 November 2017, pp.635-643

Numerical Investigation of Flow and Heat Transfer on Half Spheres in a Channel

IATS 17 8th International Advanced Technologies Symposium, Elazığ, Turkey, 19 - 22 October 2017, vol.8, pp.1697-1704

Experimental and Numerical Investigation of the Effect of Rooftop on the Flow Characteristic Between Two Buildings

IATS 17 8th International Advanced Technologies Symposium, Elazığ, Turkey, 19 - 22 October 2017, vol.8, pp.1648-1655

Kanal İçerisine Çoklu Diziler Halinde Yerleştirilen YarımKüreler için Akış ve Isı Transferinin Sayısal Olarakİncelenmesi

2nd International Mediterranean Science and Engineering Congress (IMSEC 2017), Adana, Turkey, 25 - 27 October 2017

Numerical investigation of mixing in a stirred tank by four bladed radial impeller with different configurations

Fifth International Conference Sustainable Postharvest And Food Technologies, Serbia And Montenegro, 23 - 28 April 2017

Numerical Analysis of Cooling of Squared Blocks by an Impinging Flow Jet

5th INTERNATIONAL CONFERENCE SUSTAINABLE POSTHARVEST AND FOOD TECHNOLOGIES, 23 - 28 April 2017

Üniversitelerde İş Sağlığı ve Güvenliği Çalışmalarında Süreç Yönetimi Önerisi

I. ULUSLARARASI İŞ GÜVENLİĞİ VE ÇALIŞAN SAĞLIĞI KONGRESİ, Kocaeli, Turkey, 6 - 07 May 2016

Numerical Investigation of flowstructure and tempatrature distribution of cavities with different shapes

1. Internatonal Conferances on Enginering Technology and Applied Sciences, Afyon, Turkey, 21 - 22 April 2016

Books & Book Chapters

MİKROÇİPLERİN BİRLEŞİK JET ETKİSİYLE SOĞUTULMALARININ ARAŞTIRILMASI

in: MÜHENDİSLİKTE GÜNCEL ARAŞTIRMALAR, Selahattin BARDAK, Editor, GECE KİTAPLIĞI, Ankara, pp.11-24, 2022

DESENLİ YÜZEYLERDE HAVA JETİ AKIŞI İÇİN TAŞINIM ISI TRANSFERİ VE AKIŞ ÖZELLİKLERİNİN İNCELENMESİ

in: GELECEĞİN DÜNYASINDA BİLİMSEL VE MESLEKİ ÇALIŞMALAR-MÜHENDİSLİK VE TEKNOLOJİ, Dr. Ertuğrul ÇAM-Dr. Necaatin BARIŞÇI-Dr. Murat LÜY-Dr. Munise Didem DEMİR-Dr. Mehmet GÜÇYETMEZ-Dr. Özlem TOPRAK, Editor, Ekin Basım Yayın Dağıtım, Bursa, pp.191-217, 2018