Akademik Veri Yönetim Sistemi
Kaptan A., Kartal F.(Yürütücü)
Yükseköğretim Kurumları Destekli Proje, 2020 - 2022
In this study, PLA and ABS materials produced by 3D printing with 14 mm
diameter and 300 mm length were processed by turning with abrasive water jet
machining. The effect of processing parameters with an abrasive water jet on the surface roughness
was investigated. The processing parameters are nozzle feed rate (60-210
mm/min), abrasive flow rate (150-225 g/min), chuck turning speed (75, 125, 175,
and 225 RPM) and nozzle distance (3, 5, 7 and 9 mm). Experimental studies have
shown that the increase in nozzle feed rate (from 60 to 210 mm/min), abrasive
flow rate (from 150 to 225 g/min) and nozzle distance (from 3 to 9 mm) results
in average surface roughness values increased by 26%, 35% and 19%,
respectively. It was concluded that the increase in the rotation speed of the
mirror (from 75 RPM to 225 RPM) resulted in a 17% decrease.