Effect of TiBAl inoculation on abrasive wear resistance of high Cr white cast iron


Teker T., Yilmaz S. O., Kerkut E.

MATERIALS TESTING, cilt.61, sa.7, ss.690-694, 2019 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 61 Sayı: 7
  • Basım Tarihi: 2019
  • Doi Numarası: 10.3139/120.111373
  • Dergi Adı: MATERIALS TESTING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.690-694
  • Anahtar Kelimeler: High Cr white cast iron, TiBAl, inoculation, wear resistance, HEAT-TREATMENT, AS-CAST, MECHANICAL-PROPERTIES, FRACTURE-TOUGHNESS, MICROSTRUCTURE, MO, BEHAVIOR, TRANSFORMATION, PRECIPITATION, MOLYBDENUM
  • Sivas Cumhuriyet Üniversitesi Adresli: Hayır

Özet

High chromium white cast iron (HCrWCI) is generally used in applications requiring superior wear resistance. The alloys were inoculated with 1-3 wt.-% TiBAl to rearrange the crystallography of the carbides. The alloys were subject toheat treatment at 1000 degrees C for 1 and 2 h. The microstructuresof the alloys was examined by SEM. Chemical composition was determined by EDS. For wear tests, alloys were tested using 10, 20 and 30 N loads under pin-on-disc wear conditions. Worn surfaces of the alloys were analyzed by SEM. The worst wear resistance was obtained in the alloy inoculated with 3 wt.-%. TiBAl.