Experimental research on mechanism and process of direct iron making reduction of mechanically milling scale with coal

Yilmaz S. O., Teker T.

JOURNAL OF ALLOYS AND COMPOUNDS, cilt.650, ss.741-747, 2015 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 650
  • Basım Tarihi: 2015
  • Doi Numarası: 10.1016/j.jallcom.2015.07.172
  • Dergi Adı: JOURNAL OF ALLOYS AND COMPOUNDS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.741-747
  • Anahtar Kelimeler: Mill scale, Coal, Thermal analysis, Iron ore reduction, ORE FINES, HEMATITE, KINETICS
  • Sivas Cumhuriyet Üniversitesi Adresli: Hayır

Özet

This study delved into the fundamental mechanisms of a mill scale reduction. To achieve this objective, the DRI process was applied to facilitate the mechanical milling of coal-scale mixtures. Temperatures of 700-1000 degrees C were used to sinter the mechanically milled coal-scale mixtures. The powders were subjected to scanning electron microscopy (SEM) and X-ray diffraction (XRD). In order to identify the reduction of milled scale-coal mixture with the temperature, iron phase analytical techniques and the XRD were used. The differential thermal analysis (DTA) technique was used to determine the measurements of the thermal property. Based on the findings of the experiments, it was concluded that coal devolatilisation and scale reduction forms concurrently when the mixture is being heated. By 40 h milling, the milled coal-scale mixture's reduction start temperature decreased to 750 degrees C. (C) 2015 Elsevier B.V. All rights reserved.