Metallurgical properties of boride layers formed in pack boronized cementation steel


TEKER T., Sari M.

MATERIALS TESTING, cilt.64, sa.9, ss.1332-1339, 2022 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 64 Sayı: 9
  • Basım Tarihi: 2022
  • Doi Numarası: 10.1515/mt-2022-0098
  • Dergi Adı: MATERIALS TESTING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.1332-1339
  • Anahtar Kelimeler: boronizing, cementation steel, microhardness, microstructure, surface roughness, MECHANICAL-PROPERTIES, WEAR-RESISTANCE, DIFFUSION, IRON, MICROSTRUCTURE, GROWTH, TEMPERATURE, DEPOSITION, COATINGS, FEB/FE2B
  • Sivas Cumhuriyet Üniversitesi Adresli: Evet

Özet

In the present study, cementation steel was exposed to boronizing process at 950 degrees C for 6, 8, and 10 h. Microstructural changes on the surface of the samples after boron operation were inspected by optical microscope, scanning electron microscope, energy-dispersive spectroscopy, X-ray diffraction, electron back-scatter diffraction, and elemental mapping analysis. In addition, surface roughness, microhardness, and boride layer thicknesses were measured. The boride layers deposited on the cementation steel consisted either single or double phases. The level of boride deposit of all samples was achieved from 90 to 156 mu m. The boride layer created at 950 degrees C for 10 h involved the FeB and Fe2B. The boride layers had a much higher hardness value than the substrate material due to the presence of FeB and Fe2B.