Sivas İli Koyulhisar İlçesi Heyelan Alanı Zemininin Jeofizik Yöntemlerle İncelenmesi


Creative Commons License

Över D., Özel S.

1.Genç Yerbilimciler Kongresi, İzmir, Türkiye, 5 - 07 Haziran 2015, ss.10-11

  • Yayın Türü: Bildiri / Özet Bildiri
  • Basıldığı Şehir: İzmir
  • Basıldığı Ülke: Türkiye
  • Sayfa Sayıları: ss.10-11
  • Sivas Cumhuriyet Üniversitesi Adresli: Evet

Özet

Bu çalışmada amaç, Koyulhisar (Sivas) ilçesinde bulunan heyelan alanının Sismik Kırılma Tomografi (SRT) ve Yer Radarı (GPR) yöntemleri ile incelenerek heyelan geometrisinin ve özelliklerinin ortaya konulmasıdır. Böylece, jeofizik çalışmalarla tabakalanma durumu, tabakaların sismik hız (VP) değerleri, tabakaların eğimi ve eğim yönü, kayma yüzeylerinin derinliği ve heyelan riskiyle ilgili sonuçlara ulaşmak amaçlanmıştır. Profil hatları yaklaşık olarak KD-GB yönlü (1 adet SRT profili ve 1 adet GPR) ve KB-GD (1 adet SRT ve 1 adet GPR profili) yönlü seçilmiştir. Profil boyları ise yönteme göre 50-60 m’ler arasında değişmektedir. Çalışma alanında topoğrafik ölçüler de alınmış olup, modellemede topoğrafik düzeltme yapılmıştır. Bu çalışmada jeofizik verilerin uygun yazılımlarda modellenmesi ile 2B modeller ile VP hızı hesaplanmıştır. Buna göre yaklaşık 20 m derinlikten bilgi alınmıştır. Ayrıca VP değerleri üstten alta doğru ortalama 300, 1000 ve 2000 m/sn olarak hesaplanmıştır. Tabaka kalınlıklarının ise 4 ve 10 m civarında değiştiği görülmüştür. Tüm jeofizik modellere birlikte bakıldığında kayma yüzeyi derinliğinin ise 3-10 m derinliklerde değiştiği görülmüştür. GPR modellerinde yaklaşık 5 m derinlikte tabaka arayüzeyi belirlenmiş ve elde edilen sonuçların SRT sonuçlarıyla uyumlu olduğu belirlenmiştir. SRT modellerinde belirlenen 3 tabakadan ancak 2’si GPR modellerinde görülmektedir. Bunun nedeni, GPR yöntemiyle yaklaşık 10 m derinlikten bilgi alınabilmiş olmasıdır. Sonuç olarak çalışma alanında heyelan oluşma riskinin bulunduğu anlaşılmıştır. Jeofizik modellerde tabaka eğimlerinin genel olarak topoğrafya ile aynı yönlü ve KD yönlü olduğu ve 5’den fazla olduğu anlaşılmıştır. Özellikle yağışlı dönem sonunda ve bu alana yeni yüklerin bindirilmesi sonucunda, gevşek birimin kayma yüzeyi boyunca D’ya doğru yer değişmesi yüksek ölçüde olasılıklıdır

The aim of this study is to demonstrate the geometry and property of landslides by the examination of the landslide area in Koyulhisar (Sivas) district via Seismic Refraction Tomography (SRT) and Ground Penetrating Radar (GPR) methods. lt is, thus, aimed to achieve results regarding the layering conjuncture, seismic velocity (Vp) values of the layers, slope and slope direction of the layers, the depth of the slide surface and the risk of landslides through geophysics studies. Profile lines are generally selected in NE-SW and in NW-SE directions. Profile lengths range from 50 to 60 m depending on the method used. Topographic measurements were also taken in the study area and the topographic correction was made in modeling. In this study, geophysical data are modeled through appropriate software and seismic velocities (VP) and 2D seismic models are obtained. Accordingly, the depth of research is approximately 20 m. furthermore, VP values are calculated as in average 300, 1000 and 2000 m/sec respectively. lt is determined that layer thickness varies around 4 and 10 m. lt is also determined that the depth of the slide surface range from 3 to 10 m according to all geophysical models. ln GPR models, the layer interface is determined in around 5 m and that the obtained results are in accordance with SRT results. 2 of 3 layers detected in SRT models are also obtained in GPR models. this results from the fact that the depth of research was approximately 10 m in the GPR method. Consequently, it is determined that there is a risk of landslides in the study area. It is determined that in geophysical models, the layer slope was in the same direction (NE) with the topography and more than 5. The migration of the loose unit throughout the slide surface through east is highly probable especially at the end of the rainy period and as a result of the new load on this surface area.