Synthesis and structural characterization of Fe based Ti+Ni3Al+Al2O3 reinforcement composite produced by mechanical alloying


Teker T., Yilmaz S. O.

REVISTA DE METALURGIA, cilt.56, sa.4, 2020 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 56 Sayı: 4
  • Basım Tarihi: 2020
  • Doi Numarası: 10.3989/revmetalm.178
  • Dergi Adı: REVISTA DE METALURGIA
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Compendex, Directory of Open Access Journals, DIALNET
  • Anahtar Kelimeler: Al2O3, Ball milling, Microhardness, Ni3Al, Sintering, NI-AL, MICROSTRUCTURE, NANOCOMPOSITE, STABILITY
  • Sivas Cumhuriyet Üniversitesi Adresli: Hayır

Özet

The Fe-based Ti+Ni3Al+Al2O3 powder mixture is mechanically alloyed in a Spex ball mill. Composites with Fe-based Ti+Ni3Al+Al2O3 addition were produced at 1000 degrees C sintering temperature for 1 h sintering time. The metallurgical properties of these composites were examined by scanning electron microscopy (SEM), optical microscopy (OM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and microhardness analyses. The final products produced by mechanical alloying were nanocrystalline nickel-rich solid solution and the size of average crystallite was in the range of a few nanometres. Titanium content in the reinforcement increased microhardness values of composite. The produced composites included Fe3Al, TiAl, NiAl, Al3Ni2, Al2O3 and Fe3O phases.