Determination of optimum conditions for color and COD removal of Reactive Blue 19 by Fenton oxidation process

Creative Commons License

GÖKKUŞ Ö., COŞKUN F., KOCAOĞLU M., YILDIZ Y. Ş.

DESALINATION AND WATER TREATMENT, cilt.52, ss.6156-6165, 2014 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 52
  • Basım Tarihi: 2014
  • Doi Numarası: 10.1080/19443994.2013.812523
  • Dergi Adı: DESALINATION AND WATER TREATMENT
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.6156-6165
  • Sivas Cumhuriyet Üniversitesi Adresli: Hayır

Özet

In this study, Taguchi method was used to determine the optimum parametric conditions such as initial pH, Fe2+ and H2O2 concentrations, initial dye concentration, slow mixing rate (SMR) and rapid mixing rate (RMR) for Fenton oxidation process performance. The main objective of the study is to provide maximum color and chemical oxygen demand (COD) removals by using optimal levels for Fenton reaction parameters. The orthogonal array L-25 was selected as experimental matrix to determine of the optimum parametric levels. It was also, the contribution ratios of each factor were determined by the analysis of variance analysis, separately. Thus, the most effective parameter manages to the process was determined in terms of color and COD removals. Consequently, the optimum color removal conditions for the initial pH, Fe2+ and H2O2 concentrations, initial dye concentration, SMR and RMR are 3, 500 mg/l, 150 mg/l, 250 mg/l, 60 rpm, 90 rpm, respectively, and 3, 400 mg/l, 150 mg/l, 250 mg/l, 60 rpm and 15 rpm for the initial pH, Fe2+ and H2O2 concentrations, initial dye concentration, SMR and RMR to the COD removal, respectively. Under these optimum conditions, 98.90% color and 100% COD removals were achieved by Fenton oxidation process.

In this study, Taguchi method was used to determine the optimum parametric conditions such as initial pH, Fe2+ and H2O2 concentrations, initial dye concentration, slow mixing rate (SMR) and rapid mixing rate (RMR) for Fenton oxidation process performance. The main objective of the study is to provide maximum color and chemical oxygen demand (COD) removals by using optimal levels for Fenton reaction parameters. The orthogonal array L25 was selected as experimental matrix to determine of the optimum parametric levels. It was also, the contribution ratios of each factor were determined by the analysis of variance analysis, separately. Thus, the most effective parameter manages to the process was determined in terms of color and COD removals. Consequently, the optimum color removal conditions for the initial pH, Fe2+ and H2O2 concentrations, initial dye concentration, SMR and RMR are 3, 500 mg/l, 150 mg/l, 250 mg/l, 60 rpm, 90 rpm, respectively, and 3, 400 mg/l, 150 mg/l, 250 mg/l, 60 rpm and 15 rpm for the initial pH, Fe2+ and H2O2 concentrations, initial dye concentration, SMR and RMR to the COD removal, respectively. Under these optimum conditions, 98.90% color and 100% COD removals were achieved by Fenton oxidation process.