Nano-silica inclusion effects on mechanical and dynamic behavior of fiber reinforced carbon/Kevlar with epoxy resin hybrid composites


Alsaadi M., BULUT M., Erkliğ A., Jabbar A.

Composites Part B: Engineering, cilt.152, ss.169-179, 2018 (SCI-Expanded) identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 152
  • Basım Tarihi: 2018
  • Doi Numarası: 10.1016/j.compositesb.2018.07.015
  • Dergi Adı: Composites Part B: Engineering
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.169-179
  • Anahtar Kelimeler: Carbon/Kevlar fiber, Damping, Epoxy, Flexural, Nano-silica, Tensile, Vibration
  • Sivas Cumhuriyet Üniversitesi Adresli: Evet

Özet

The effects of nano-silica (NS) particles inclusion on the tensile, flexural, vibration and damping characteristics of intraply and woven fiber reinforced carbon/Kevlar/epoxy (CKFRE) hybrid composites were experimentally investigated. Test samples were prepared according to ASTM standards for five different weight contents of NS particles (0.5, 1, 1.5, 2.5 and 3 wt%). Experimental modal analysis was performed only for fundamental frequency to measure damping and natural frequency for characterization of vibration properties. Results showed that 20% improvement in tensile strength was seen at NS content of 3 wt%, while flexural strength was increased by 35.7% according to unmodified CKFRE samples. It was concluded that interaction of NS particles with epoxy and fiber leading to improve interfacial stress resulted in a significant effect on dynamic properties in terms of natural frequency and damping ratio.