Publications & Works

Publication Network
Articles 23
All (23)
SCI-E, SSCI, AHCI (5)
SCI-E, SSCI, AHCI, ESCI (7)
ESCI (2)
Scopus (6)
TRDizin (14)
Other Publications (2)

1. Yüksek Basınçlı Sıcak Proses Geçiş Hatlarında Bağlantı Mikroyapı ve Mekanik Özelliklerinin Araştırılması

Mercan S., Kaptan A.
Black Sea Journal of Engineering and Science , vol.8, no.6, pp.1748-1758, 2025 (TRDizin) identifier

2. Sustainable Reinforcement of PLA Composites with Waste Beech Sawdust for Enhanced 3D-Printing Performance

Kartal F., KAPTAN A.
Journal of Materials Engineering and Performance , vol.34, no.14, pp.15248-15259, 2025 (SCI-Expanded) identifier

3. Investigation of the Effect of Exposure to Liquid Chemicals on the Strength Performance of 3D-Printed Parts from Different Filament Types

KAPTAN A.
Polymers , vol.17, no.12, 2025 (SCI-Expanded) identifier identifier

4. Comprehensive and essential review of advanced researches abrasive waterjet machining

Kartal F., Kaptan A.
International Advanced Researches and Engineering Journal , vol.9, no.1, pp.50-69, 2025 (Peer-Reviewed Journal)

5. A critical review of composite filaments for fused deposition modeling: Material properties, applications, and future directions

Kaptan A., Kartal F.
European Mechanical Science , vol.8, no.3, pp.199-209, 2024 (TRDizin) identifier

6. A review on Integration of Carbon Fiber and Polymer Matrix Composites in 3D Printing Technology

Kaptan A., Kartal F.
International Advanced Researches and Engineering Journal , vol.8, no.2, pp.1-16, 2024 (Scopus) Creative Commons License

7. Influence of Process Parameters on Kerf Width in Abrasive Waterjet Machining of GFRP Composites

KAPTAN A., MERCAN S., KARTAL F.
Sivas Cumhuriyet Üniversitesi Bilim ve Teknoloji Dergisi , vol.3, 2024 (Peer-Reviewed Journal) Creative Commons License

8. Advancements in polylactic acid research: From material properties to sustainable applications

KAPTAN A., KARTAL F.
European Mechanical Science , vol.8, no.2, pp.1-11, 2024 (TRDizin) identifier

9. Damaged surface morphology of AA6063/Cu30Zn parts joined with a new technology by friction-mechanical locking method

MERCAN S., KAPTAN A.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , vol.46, pp.1-15, 2024 (SCI-Expanded) identifier

10. The Effect of Channel Depth on Joint Quality in Cu/AISI 1040 Materials Joined by Mechanical Locking Method

MERCAN S., KAPTAN A.
TEHNICKI VJESNIK , vol.31, no.3, pp.744-752, 2024 (SCI-Expanded) identifier

11. Response of PLA Material to 3D Printing Speeds: A Comprehensive Examination on Mechanical Properties and Production Quality

Kartal F., Kaptan A.
European Mechanical Science , vol.8, no.1, pp.1-12, 2024 (Peer-Reviewed Journal)

12. Artificial Neural Network and Multiple Regression Analysis for Predicting Abrasive Water Jet Cutting of Al 7068 Aerospace Alloy

Kartal F., Kaptan A.
SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES , vol.42, no.2, pp.1-15, 2024 (ESCI)

13. Experimental investigation and optimization of the effect garnet vibratory tumbling as a post-process on the surface quality of 3D printed PLA parts

KARTAL F., KAPTAN A.
European Mechanical Science , vol.8, no.1, pp.19-28, 2024 (Peer-Reviewed Journal) Creative Commons License identifier

14. Effect of Filling Ratio-Pattern Parameters on Mechanical Properties of PLA Filaments Used in 3D Printing

Kartal F., Kaptan A.
Black Sea Journal of Engineering and Science , vol.7, no.1, pp.196-202, 2024 (Peer-Reviewed Journal) Creative Commons License identifier

15. Mechanical Performance of Salvadora Persical (Miswak) Reinforced Polylactic Acid Matrix Composites for Three Dimensional Printing

kartal f., KAPTAN A.
Black Sea Journal of Engineering and Science , vol.6, no.4, pp.458-468, 2023 (TRDizin) identifier

16. Strength Performance Evaluations of Vehicle Cylindrical LPG Tanks

Kaptan A., Kişioğlu Y.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , pp.1-13, 2023 (ESCI)

17. Investigating the Effect of Nozzle Diameter on Tensile Strength in 3D-Printed Printed Polylactic Acid Parts

KAPTAN A., KARTAL F.
Black Sea Journal of Engineering and Science , vol.6, no.3, pp.276-282, 2023 (Peer-Reviewed Journal) Creative Commons License Sustainable Development identifier

18. Experimental Determination of the Optimum Cutting Tool for CNC Milling of 3D Printed PLA Parts

Kartal F., Kaptan A.
International Journal of 3D Printing Technologies and Digital Industry , vol.7, no.2, pp.150-160, 2023 (TRDizin)

19. Influence of Abrasıve Water Jet Turning Operating Parameters On Surface Roughness of ABS and PLA 3D Printed Parts Materials

Kartal F., Kaptan A.
International Journal of 3D Printing Technologies and Digital Industry , vol.7, no.2, pp.184-190, 2023 (TRDizin)

20. Effects of annealing temperature and duration on mechanical properties of PLA plastics produced by 3D Printing

KARTAL F., KAPTAN A.
European Mechanical Science , vol.7, no.3, pp.152-159, 2023 (Peer-Reviewed Journal) Creative Commons License identifier

21. 3B Yazıcıda Üretilen Düz Dişli Çarkların RTV2 Silikonu Kullanılarak Çoğaltılması

Kartal F., Nazlı C., Yerlikaya Z., Kaptan A.
International Journal of 3D Printing Technologies and Digital Industry , vol.5, no.1, pp.34-42, 2021 (TRDizin) Creative Commons License identifier

22. The Effect of Fill Rate on Mechanical Properties of PLA Printed Samples

Kaptan A., Kartal F.
Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi , vol.10, no.3, pp.1919-1927, 2020 (Peer-Reviewed Journal) Creative Commons License

23. Determination of burst pressures and failure locations of vehicle LPG cylinders

Kaptan A., Kisioglu Y.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING , vol.84, no.7, pp.451-459, 2007 (SCI-Expanded, Scopus) Creative Commons License Sustainable Development identifier identifier
Papers Presented at Peer-Reviewed Scientific Conferences 11

1. Dimensional Optimization of Road Transport Milk Tankers Using Genetic Algorithm

Kaptan A., Kartal F.
3. Bilsel International Erzurum Scientific Research Congress, Erzurum, Turkey, 25 - 26 April 2026, pp.1-10, (Full Text)

2. Mathematical Modeling of Turning Operation with Abrasive Water Jet (AWJ)

Kaptan A., Kartal F.
5. International Gaziantep Scientific Research Congress, Gaziantep, Turkey, 27 - 28 December 2025, pp.697-702, (Full Text)

3. Statistical Modeling of The Effect of Process Parameters on Surface Roughness in Petg Material Parts Produced by FDM Method

Kartal F., Kaptan A.
Ege 14th International Conference and Applied Sciences, İzmir, Turkey, 23 - 29 December 2025, pp.1-10, (Full Text)

4. Optimization of Fused Deposition Method (FDM) 3D Printer Parameters: An Experimental and Data-Driven Investigation on Tensile Strength and Surface Roughness with Polyethylene Terephthalate Glycol (PETG) Filament

Kaptan A.
12. International Conference on Materials Science and Nanotechnology for Next Generation, Sivas, Turkey, 10 - 12 September 2025, pp.1-10, (Full Text)

5. Comparison of Mechanical Properties of Engineering Filaments for FDM 3D Printing

Kartal F., Kaptan A.
6TH INTERNATIONAL CONFERENCE ON SCIENTIFIC AND ACADEMIC RESEARCH, Konya, Turkey, 19 - 20 March 2025, pp.74-88, (Full Text)

6. Part Production Time Estimation Model in 3d Printer: DataBased Machine Learning Approach And Parameter Analysis

Kaptan A.
II. INTERNATIONAL CONFERENCE ON SCIENTIFIC AND INNOVATION RESEARCH, Sivas, Turkey, 15 - 17 September 2023, pp.1226-1241, (Full Text) Creative Commons License

7. The Effect of Annealing Process Applied to PLA Parts Manufactured by Fused Deposition Modeling on Mechanical Properties

Kaptan A., Kartal F.
2nd INTERNATIONAL HALICH CONGRESS ON MULTIDISCIPLINARY SCIENTIFIC RESEARCH, İstanbul, Turkey, 29 - 30 October 2021, pp.496-502, (Full Text) Creative Commons License

8. Machinability of AISI 304 Austenitic Stainless Steel by Abrasive Waterjet Processing

Kaptan A., Kartal F.
13. ULUSLARARASI EJONS MATEMATİK-MÜHENDİSLİK-FEN VE SAĞLIK BİLİMLERİ KONGRESİ, Nevşehir, Turkey, 25 - 26 October 2021, pp.281-287, (Full Text) Creative Commons License Sustainable Development

9. 10 Yılını Tamamlamış LPG Tanklarının Hasar Analizi

KAPTAN A., KARTAL F., KİŞİOĞLU Y.
14. Uluslararası Makina Tasarım ve İmalat Kongresi, 29 July - 02 August 2010, (Full Text)

10. Taşıt Silindirik LPG Tanklarında Hızlandırılmış Yorulma Deneyi Performansı

KİŞİOĞLU Y., KARTAL F., KAPTAN A.
Eksen Mühendislik 2009 Kullanıcı Konferansı, Turkey, 1 - 02 January 2009, (Full Text)

11. Burst Pressure Prediction of the Vehicle Cylindrical LPG Tanks

KİŞİOĞLU Y., KAPTAN A.
11 th Conference for Computer-A,ded Engineering and System Modeling, 15 September 2006, (Summary Text)
Metrics

Publication

34

Publication (WoS)

7

Publication (Scopus)

6

Citation (WoS)

22

H-Index (WoS)

3

Citation (Scopus)

26

H-Index (Scopus)

3

H-Index (Scholar)

8

Citation (TrDizin)

4

H-Index (TrDizin)

1

Citation (Sum Other)

13

Total Citation Count

39

Project

6

Open Access

12
UN Sustainable Development Goals