Prof. Dr. MEHMET ŞİMŞİR

Yayın Ağı

Makaleler 31

1. Suitability of Water Quality for Irrigation Purposes Using GIS-Based Irrigation Water Quality Index

ŞİMŞİR M., YILDIZ S., KARAKUŞ C. B., Özbek D.

Irrigation and Drainage , cilt.74, sa.3, ss.1103-1116, 2025 (SCI-Expanded, Scopus)

2. New Dyestuff Production to Sensitively Determine the Sealing Capacity of the Implant Abutment Connection

YABAŞ E., ŞİMŞİR M., Çetin M., Özaydın F.

Cumhuriyet University , cilt.25, sa.2, ss.32-37, 2022 (Scopus)

3. ZnO/Al2O3 layered structures deposited by RF magnetron sputtering on glass: growth characteristics, optical properties, and microstructural analysis

ŞENADIM TÜZEMEN E., ÖZER A., DEMİR İ., ALTUNTAŞ İ., ŞİMŞİR M.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.57, sa.5, ss.1379-1388, 2021 (SCI-Expanded)

4. A Novel and Eco-friendly Approach for the Simultaneous Recovery of Copper and Diamond from Waste Cutting Segments via Electrodissolution/Deposition

Kul M., Erden F., OSKAY K. O., Karasungur O., ŞİMŞİR M., Kumruoglu L. C., et al.

JOURNAL OF SUSTAINABLE METALLURGY , cilt.7, sa.3, ss.1224-1240, 2021 (SCI-Expanded)

5. A comparative study of hardness/scratch/wear properties of TiCN and TiAlN Coatings on DIN 1.2842 Steel by CA-PVD Method

Şimşir M., Palacı Y., Özer A.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.58, ss.1-7, 2021 (SCI-Expanded)

6. Using of Metal Coated Diamond by Polymeric Binder in Design of Segment Used in Natural Stone Sawing Process

Sübütay H., Şimşir M.

International Journal of Innovative Engineering Applications , cilt.3, sa.1, ss.1-8, 2019 (Hakemli Dergi)

7. Effects of Molybdenum and Boron Additions of Fe-Based Metal Matrix Composites by Warm Compaction Method

Gun T., ŞİMŞİR M.

ACTA PHYSICA POLONICA A , cilt.135, sa.4, ss.819-824, 2019 (SCI-Expanded)

8. The Effects of Heat Treatment on the Tensile Properties of Camshaft made of GGG70 Series Spherical Graphite Cast Iron

Karaca B., ŞİMŞİR M.

ACTA PHYSICA POLONICA A , cilt.135, sa.4, ss.811-818, 2019 (SCI-Expanded)

9. The Effects of Austempering Heat Treatment on the Mechanical Properties of Heavy Vehicles Camshaft made of Different Analysis Ductile Cast Iron

Karaca B., ŞİMŞİR M.

ACTA PHYSICA POLONICA A , cilt.135, sa.4, ss.804-810, 2019 (SCI-Expanded)

10. Processing and characterization of porous SiC/NiTi alloys for biomedical applications

Şimşir M., Akkan H., Öksüz K. E.

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.57, ss.363-369, 2019 (SCI-Expanded)

11. Effect of Austempering Heat Treatment on the Tensile Properties of CamShaft Made of Ductile Cast Iron

Karaca B., ŞİMŞİR M.

International Refereed Journal of Engineering and Science , cilt.6, sa.11, ss.16-22, 2017 (Hakemli Dergi)

12. Investigation of Mechanical Properties of Fe-Based Metal Matrix Composites by Warm Compaction for Gear Production

Gun T., Simsir M.

ACTA PHYSICA POLONICA A , cilt.131, sa.3, ss.443-447, 2017 (SCI-Expanded)

13. The Effects of Austempering and Induction Hardening on the Wear Properties of Camshaft Made of Ductile Cast Iron

Karaca B., Simsir M.

ACTA PHYSICA POLONICA A , cilt.131, sa.3, ss.448-452, 2017 (SCI-Expanded)

14. Effect of induction hardening of Fe-C-Ni-Cu-Mo-B metal matrix composites by powder metallurgy for gear production

Gün T., ŞİMŞİR M., Özaydın F.

Journal of Achivements in Materials and Manufacturing Engineering , cilt.79, sa.2, ss.49-53, 2016 (Hakemli Dergi)

15. Investigating the effect of testing parameters on adhesive wear using Taguchi method

ŞİMŞİR M., SELÇUK B., ASLAN N.

Advances in Materials and Processing Technologies , cilt.1, ss.493-507, 2016 (Scopus)

16. Effect of chill formation on the mechanical properties and microstructure of grey and nodular cast irons used in automotive industry

Subutay H., ŞİMŞİR M., Aydin M., Karaca B.

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.22, sa.1, ss.1-7, 2016 (ESCI)

17. Optimization of selective leaching of Zn from electric arc furnace steelmaking dust using response surface methodology

Kul M., Oskay K. O., Şimşir M., Subutay H., Kirgezen H.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.25, ss.2753-2762, 2015 (SCI-Expanded)

18. Processing and Mechanical Properties of B4C/Diamond Impregnated Fe/Co MMC

Öksüz K. E., Şimşir M.

ACTA PHYSICA POLONICA A , cilt.127, sa.4, ss.1139-1141, 2015 (SCI-Expanded)

19. Ballistic Performance of Kevlar49/ UHMW-PEHB26 Hybrid Layered-Composite

Yavaş M. O., AVCI A., ŞİMŞİR M., AKDEMİR A.

Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi , cilt.7, sa.4, ss.21-27, 2015 (Hakemli Dergi)

20. Investigation on the machinability of steel/steel laminates by CO2 laser

ŞİMŞİR M., ÖZER A., KUMRUOĞLU L. C.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY , cilt.48, ss.80-94, 2014 (SCI-Expanded)

21. Effects of sintering temperature and addition of Fe and B4C on hardness and wear resistance of diamond reinforced metal matrix composites

Şimşir M., Öksüz K. E.

JOURNAL OF SUPERHARD MATERIALS , cilt.35, sa.6, ss.369-382, 2013 (SCI-Expanded)

22. Investigation of Mechanical Properties and Microstructure of AA2024 and AA7075

ÖKSÜZ K. E., BAĞIROV H., ŞİMŞİR M., Ceyhun K., Aykut Ö., YZ D., et al.

Applied Mechanics and Materials , cilt.390, ss.547-551, 2013 (Scopus)

23. Investigation of the tensile properties of continuous steel wire-reinforced gray cast iron composite

Akdemir A., KUŞ R., ŞİMŞİR M.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.528, ss.3897-3904, 2011 (SCI-Expanded)

24. Impact toughness and microstructure of continuous steel wire-reinforced cast iron composite

Akdemir A., KUŞ R., ŞİMŞİR M.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.516, ss.119-125, 2009 (SCI-Expanded)

25. Mechanical and microstructural properties of low-carbon steel-plate-reinforced gray cast iron

AVCI A., Ilkaya N., ŞİMŞİR M., Akdemir A.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.209, sa.3, ss.1410-1416, 2009 (SCI-Expanded)

26. An investigation into stainless-steel/structural-alloy-steel bimetal produced by shell mould casting

ŞİMŞİR M., KUMRUOĞLU L. C., ÖZER A.

MATERIALS & DESIGN , cilt.30, sa.2, ss.264-270, 2009 (SCI-Expanded)

27. Effect of heat treatment on fracture behavior of steel-wire-reinforced gray cast iron

Simsir M.

INTERNATIONAL JOURNAL OF FRACTURE , cilt.151, sa.2, ss.121-133, 2008 (SCI-Expanded)

28. Fracture behavior and microstructure of steel fiber reinforced cast iron

Simsir M.

JOURNAL OF MATERIALS SCIENCE , cilt.42, sa.16, ss.6701-6707, 2007 (SCI-Expanded)

29. Comparison of two non-destructive inspection techniques on the basis of sensitivity and reliability

Simir M., Ankara A.

MATERIALS & DESIGN , cilt.28, sa.5, ss.1433-1439, 2007 (SCI-Expanded)

30. Modelling of Fracture Toughness in Steel Laminates with Finite Element Method

ŞİMŞİR M., ÖZTÜRK T., Mustafa D.

Turkish Journal of Engineering & Environmental Sciences , cilt.29, sa.1, ss.41-50, 2005 (Hakemli Dergi)

31. Investigation of the Fracture Behavior of Steel Steel Laminates in Crack Divider Orientation

ŞİMŞİR M., ÖZTÜRK T., Mustafa D.

Turkish Journal of Engineering & Environmental Sciences , cilt.28, sa.6, ss.397-404, 2004 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 53

1. NEW GENERATION HYBRID NANOMATERIALS IN FUTURE MATERIALS TECHNOLOGIES

YABAŞ E., ŞİMŞİR M.

II. INTERNATIONAL CONGRESS ON ADVANCED RESEARCH AND APPLICATIONS, 19 - 20 Eylül 2024, (Tam Metin Bildiri)

2. INVESTIGATION OF T-JOINT BUTT WELDING OF STAINLESS AND PLAIN CARBON STEELS WITH METAL ACTIVE GAS WELDING IN PB POSITION

ŞİMŞİR M., Ulaş G.

II. INTERNATIONAL CONGRESS ON ADVANCED RESEARCH AND APPLICATIONS, 19 Eylül 2024

3. MICROBIOLOGICAL AND MOLECULAR ANALYSIS OF WATER WELLS AND YILDIZ RIVER

PEKTAŞ A. N., ŞİMŞİR M.

5th International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2024), 26 - 28 Haziran 2024, (Tam Metin Bildiri)

4. ESTAŞ DOMESTIC AND NATIONAL NITRILE GLOVE PRODUCTION

Canpolat R., Özaydın F., Azgın E., ATCIYURT B. C., ŞİMŞİR M., Mavuş O., et al.

INTERNATIONAL CONGRESS ON ADVANCED RESEARCH AND APPLICATIONS, Türkiye, 01 Aralık 2023, ss.443-453, (Tam Metin Bildiri)

5. COMPARISON OF THE EFFECT OF SUBSTRATES IN TERMS OF HARDNESS/SCRATCH PROPERTIES OF CrN COATED BY PVD METHOD

ŞİMŞİR M.

2nd International Materials Engineering and Advanced Manufacturing Technologies Congress (IMEAMTC'23), İstanbul, Türkiye, 12 - 13 Ocak 2023, ss.12-21, (Tam Metin Bildiri)

6. EFFECTS OF AMOUNT OF Co AND Ti-COATED DIAMOND ON THE WEAR PROPERTIES OF SEGMENTS FOR GANGSAW BLADE IN NATURAL STONE CUTTING PROCESS

ŞİMŞİR M.

2nd INTERNATIONAL MATERIALS ENGINEERING AND ADVANCED MANUFACTURING TECHNOLOGIES CONGRESS (IMEAMTC’23), İstanbul, Türkiye, 12 - 13 Ocak 2023, (Tam Metin Bildiri)

7. Influence of Pressure on ZnO/Al2O3 Produced by RF Magnetron Sputtering on Glass Substrate

Hopoğlu H., Aydınoğlu H., DEMİR İ., ALTUNTAŞ İ., ŞİMŞİR M., ŞENADIM TÜZEMEN E.

9TH INTERNATIONAL ADVANCED TECHNOLOGIES SYMPOSIUM (IATS'21), 27 - 28 Ekim 2021, (Tam Metin Bildiri)

8. Fiziksel Buhar Biriktirme Yöntemi İle AISI O2 ve K390 Çeliklerine CrN Kaplamanın Karakterizasyonu

ŞİMŞİR M.

IMSTEC 2019, 4th International Conference on Material Science and Technology, KIZILCAHAMAM/ANKARA, Türkiye, 18 - 20 Ekim 2019, ss.795-800, (Tam Metin Bildiri)

9. Fiziksel Buhar Biriktirme Yöntemi ile DIN 1.2379 Çeliğine TiCN ve CrN Sert Kaplamaların Mekanik Özelliklerinin Karşılaştırılması

ŞİMŞİR M.

IMSTEC 2019, 4th International Conference on Material Science and Technology, KIZILCAHAMAM/ ANKARA, 18 - 20 Ekim 2019, ss.819-825

10. Sivas İli Ekonomik Verileri

Şimşir M., Dündar S.

3. Maden Kenti Sivas Zirvesi, Sivas, Türkiye, 16 - 17 Kasım 2017, ss.163-186, (Tam Metin Bildiri)

11. INVESTIGATION OF CHARACTERIZATION AND MECHANICAL PROPERTIES, USE OF METAL COATED DIAMOND AND WC IN SOCKET PRODUCTION

SÜBÜTAY H., ŞİMŞİR M.

IMSMATEC’xx19, 21 - 23 Haziran 2019, (Tam Metin Bildiri)

12. Soket üretiminde metal kaplı elmas ve SiC kullanımı karakterizasyonu ve mekanik özelliklerinin incelenmesi

SÜBÜTAY H., ŞİMŞİR M.

4. uluslararası mühendislik mimarlık ve tasarım kongresi, 23 - 24 Nisan 2019, (Tam Metin Bildiri)

13. Effects of Mo and B Additions on Induction Hardening of Fe-C-Ni-Cu Metal Matrix Composites Produced by Warm Compaction Method

Gün T., ŞİMŞİR M., Karaca B., Özaydın F.

19th International Metallurgy and Materials Congress, 25 - 27 Ekim 2018, (Tam Metin Bildiri)

14. Th e Eff ects of Austempering Time and Diff erent Quenching Media on Mechanical Properties of CAM Shaft

Karaca B., Gün T., Aydın M., ŞİMŞİR M.

19th International Metallurgy and Materials Congress, 25 - 27 Ekim 2018, (Tam Metin Bildiri)

15. Using of Metal Coated Diamond in Design of Segment Used inNatural Stone Sawing Process

SÜBÜTAY H., ŞİMŞİR M.

CIEA 2018, 20 - 22 Eylül 2018, (Tam Metin Bildiri)

16. The sintering properties of Cu1CrZr alloys produced by mechanochemical activation

Öksüz K. E., Sübütay H., Şimşir M., Kumruoğlu L. C., Kul M., Özer A.

4th International Turkic World Conference on Chemical Sciences and Technologies ITWCCST 2018, Kyyiv, Ukrayna, 7 - 10 Eylül 2018, cilt.1, ss.0-63, (Özet Bildiri)

17. The sintering properties of Cu1CrZralloys produced bymechanochemical activation

ÖKSÜZ K. E., ŞİMŞİR M., KUL M., KUMRUOĞLU L. C., ÖZER A.

4th International Turkic World Conference onChemical Sciences and Technologies (ITWCCST 2018)2nd International Conference on Innovations in Natural Science and Engineering, 7 - 10 Ekim 2018

18. The effect of ball milling time on the mechanochemical activation properties of Cu1CrZr alloys

Özer A., Öksüz K. E., Sübütay H., Kurt N., Şimşir M., Kumruoğlu L. C., et al.

4th International Turkic World Conference on Chemical Sciences and TechnologiesITWCCST 2018, Kiev, Ukrayna, 7 - 10 Eylül 2018, cilt.1, (Özet Bildiri)

19. A MODEL FOR DEVELOPMENT OF COUNTRY ON THE BASIS OF INNOVATION GOVERNMENT-UNIVERSITYINDUSTRYCOOPERATION (GUIC)

ŞİMŞİR M.

INTERNATIONAL CONFERENCE ONINNOVATIVE ENGINEERINGAPPLICATIONS, Sivas, Türkiye, 20 - 22 Eylül 2018, (Tam Metin Bildiri)

20. Powder Copper Extraction and Diamond Recovery from Scrapped Saw Blades by Electro Dissolution-Deposition

OSKAY K. O., KUL M., KUMRUOĞLU L. C., KARAKAYA İ., ŞİMŞİR M., ERTAŞ H. A., et al.

ISEM 2018 4th INTERNATIONAL SYMPOSIUM ON ENVIRONMENT AND MORALSSarajevo / Bosnia and Herzegovina 27-29 JUNE 2018, Sarajevo, Bosna-Hersek, 27 - 29 Haziran 2018, (Tam Metin Bildiri)

21. Characterization of CrN Coatiıng on DIN1.2379 and DIN 1.2842 Cold Work Tool Steels By Physical Vapor Deposition

Korkmaz S., ŞİMŞİR M., KUL M.

IMSTEC 2017, 11 - 13 Ekim 2017, (Özet Bildiri)

22. A Study on the Fabrication of TiNi/SiCp Alloys By PM Method and its Characterization

ÖKSÜZ K. E., ŞİMŞİR M., Akkan H.

IMSTEC 2017, 11 - 13 Ekim 2017, (Özet Bildiri)

23. Effect of Metal Coated Diamond on Microstructure and Mechanical Properties of Metal Matrix Composites

Sübütay H., ŞİMŞİR M.

IMSTEC 2017, 11 - 13 Ekim 2017, (Özet Bildiri)

24. A Study on the Fabrication of TiNi/SiCp Alloys by PM Method and Characterization

ÖKSÜZ K. E., ŞİMŞİR M., AKKAN H.

The International Conference on Material Science and Technology in Cappadocia (IMSTEC 2017), Ürgüp-Nevşehir, Türkiye, 11 - 13 Ekim 2017, cilt.1, ss.774

25. Characterization of CRN Coating on DIN 1.2379 and DIN 1.2842 Cold Work Tool Steels by Physical Vapor Deposition

KORKMAZ S., ŞİMŞİR M., KUL M.

IMSTEC 2017, 11 - 13 Ekim 2017, (Özet Bildiri)

26. Effect of SiC Particle Size on the Physical and Mechanical Properties of NiTi Alloys

Akkan H., Şimşir M., Öksüz K. E.

10th International Conference on Materials Science Engineering (Bramat 2017), Brasov, Romanya, 8 - 11 Mart 2017, cilt.907, ss.3-7, (Tam Metin Bildiri)

27. EFFECT OF HEAT TREATMENT ON THE TENSILE PROPERTIES OF CAM SHAFTMADE OF DUCTILE CAST IRON

Karaca B., ŞİMŞİR M., Akkan H.

IMSP'16, 12 - 14 Ekim 2016

28. EFFECT OF INDUCTION HARDENING OF Fe C Ni Cu Mo B METAL MATRİXCOMPOSİTES BY POWDER METALLURGY FOR GEAR PRODUCTION

Gün T., ŞİMŞİR M., Özaydın F.

ISMP'16, 12 - 14 Ekim 2016, (Tam Metin Bildiri)

29. DİŞLİ ÜRETİMİ İÇİN TOZ METALURJİSİ YÖNTEMİ İLE ÜRETİLMİŞ Fe C Ni Cu Mo B METAL MATRİKSLİ KOMPOZİTİN MEKANİK ÖZELLİKLERİNİN ARAŞTIRILMASI

GÜN T., ŞİMŞİR M., ÖZAYDIN F.

IMMC 2016, 29 Eylül - 01 Ekim 2016, (Tam Metin Bildiri)

30. DÖKME DEMİRDEN ÜRETİLMİŞ KAM MİLLERİNİN AŞINMA ÖZELLİKLERİNE ISIL İŞLEMİN ETKİSİ

KARACA B., ŞİMŞİR M., AYDIN M.

IMMC 2016, 29 Eylül - 01 Ekim 2016, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

31. The Effects of Austempering and Induction Hardening on the wear properties of cam shaft made of ductile cast iron

KARACA B., ŞİMŞİR M.

APMAS 2016, 1 - 03 Haziran 2016, (Özet Bildiri)

32. Investigation of mechanical Properties of Fe C Ni Cu Mo B metal matrix composites by powder metallurgy for gear production

GÜN T., ŞİMŞİR M.

APMAS 2016, 1 - 03 Haziran 2016, (Özet Bildiri)

33. Farklı Aşılayıcıların Kam Mili Döküm Kalitesine Etkisinin İncelenmesi

ŞİMŞİR M., Kırgezen H., Özaydın F.

IMSTEC'16, 6 - 08 Nisan 2016, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

34. Investigating the effect of testing parameters onadhesive wear using Taguchi method

ŞİMŞİR M., SELÇUK B., ASLAN N.

Advances in Materials and Processing Technologies, 17 - 20 Kasım 2014, (Tam Metin Bildiri)

35. VORTEX DÖKÜM YÖNTEMİ İLE SİC TAKVİYELİ Al 7075 ALAŞIMMATRİSLİ KOMPOZİT KAM ÜRETİMİ

Tuğçe Yasemin O., ŞİMŞİR M., Arslan Z., Aydın M., Bahadır K.

ULUSLAR ARASI KATILIMLI III. EGE KOMPOZIT MALZEMELER SEMPOZYUMU, Türkiye, 5 - 07 Kasım 2015, ss.628-640, (Tam Metin Bildiri)

36. TOZ METALURJİSİ YÖNTEMİ İLE KOMPOZİT KAM ÜRETİMİ VEKARAKTERİZASYONU

Arslan Z., ŞİMŞİR M., Tuğçe Yasemin O., Bahadır K., Hülya A.

ULUSLAR ARASI KATILIMLI III. EGE KOMPOZIT MALZEMELER SEMPOZYUMU, Türkiye, 5 - 07 Kasım 2015, ss.599-609, (Tam Metin Bildiri)

37. BALLISTIC PERFORMANCE OF KEVLAR49 UHMW PEHB26 HYBRID LAYEREDCOMPOSITE

mert onur y., AVCI A., ŞİMŞİR M., AKDEMİR A.

ULUSLARARASI KATILIMLI 1. SAVUNMA SANAYİ SEMPOZYUMU, Türkiye, 9 - 10 Nisan 2015, (Tam Metin Bildiri)

38. 16MnCr5 ÇELİĞİNDEN İMAL EDİLEN KAM MİLİNİN MİKROYAPISINA ISIL İŞLEMİN ETKİSİ

halit S., ŞİMŞİR M., Bahadır K., Yıldırım E.

Second International Iron and Steel Symposium, 1 - 03 Nisan 2015

39. The microstructure and wear behaviour of sintered Astaloy 85Mo

ÖKSÜZ K. E., Gün T., ŞİMŞİR M.

High Performance and Optimum Design of Structures and Materials, Ostend, Belgium, 9 - 11 Haziran 2014, cilt.137

40. Fabrication and Characterization of TiNi/SiCp Shape Memory Composites

Öksüz K. E., Şimşir M., Akkan H.

17th International Metallurgy Materials Congress (IMMC 2014), İstanbul, Türkiye, 11 - 13 Eylül 2014, cilt.1, ss.731-737, (Tam Metin Bildiri)

41. Production of V-B Reinforced Fe Matrix Composites

Öksüz K. E., Çevik M., Ahmet Enbiya B., Özer A., Şimşir M.

ICMSMM 2014), XI International Conference on Materials Science, Metal and Manufacturing, Barcelona, İspanya, 18 - 19 Ağustos 2014, cilt.8, ss.704-708, (Tam Metin Bildiri)

42. CHARACTERIZATION AND MECHANICAL PROPERTIES OF PM Fe-Cu/SiCp ALLOYS

Öksüz K. E., Gün T., Şimşir M.

4th International Conference on Ultrafine Grained and Nano-Structured Materials (UFGNSM 2013), Tehran, İran, 5 - 06 Kasım 2013, cilt.829, ss.73-75, (Tam Metin Bildiri)

43. Investigation of Mechanical Properties and Microstructure of AA2024 and AA7075

Öksüz K. E., Bağırov H., Şimşir M., Ceyhun K., Aykut Ö., Yusuf Ziya D., et al.

4th International Conference on Mechanical and Aerospace Engineering (ICMAE 2013), Moscow, Rusya, 20 - 21 Temmuz 2013, cilt.390, ss.547-551, (Tam Metin Bildiri)

44. Caratterizzazione di Materiali Compositi a Matrice Metallica Fe Co e Rinforzo B4C Impregnati di Diamante

Öksüz K. E., Şimşir M., Şahin Y.

Diamante Applicazioni Tecnologia, Milan, İtalya, 12 Haziran - 12 Eylül 2012, cilt.18, ss.65-71, (Tam Metin Bildiri)

45. Wear behavior of diamond plus SiCp-reinforced metal matrix composite by Taguchi method

Şahin Y., Öksüz K. E., Şimşir M.

3rd International Conference on Manufacturing Science and Engineering (ICMSE 2012), Xiamen, Çin, 27 - 29 Mart 2012, ss.1309-1312, (Tam Metin Bildiri)

46. Toz Metalurjisi ile Üretilen ve Mermer Doğal Taş Kesmede Kullanılan Kesici Uçlara B4C İlavesinin Etkilerinin İncelenmesi

Öksüz K. E., Şimşir M., Şahin Y.

6. Uluslararası Toz Metalurjisi Konferansı ve Sergisi, (6IPMC), Ankara, Türkiye, 5 - 09 Ekim 2011, cilt.1, ss.588-591, (Tam Metin Bildiri)

47. Wear Studies on Diamond Reinforced Fe Co Based Metal Matrix Composites

Öksüz K. E., Şimşir M., Şahin Y.

6th International Powder Metallurgy Conference and Exhibition (6IPMC), Ankara, Türkiye, 5 - 09 Ekim 2011, cilt.1, ss.151-158, (Tam Metin Bildiri)

48. Characterization of Diamond Impregnated B4C Fe Co MMC

Öksüz K. E., Şimşir M., Şahin Y.

Euro PM 2011 Congress and Exhibition, Barcelona, İspanya, 9 - 12 Ekim 2011, cilt.1, ss.247-253, (Tam Metin Bildiri)

49. Toz Metalurjisi Yöntemiyle Üretilen ve Mermer Doğal Taş Kesmede Kullanılan Kesici Uçlara B4C İlavesinin Etkilerinin İncelenmesi

ÖKSÜZ K. E., ŞİMŞİR M., ŞAHİN Y.

6th International Powder Metallurgy Conference & Exhibition, 5 - 09 Ekim 2011, ss.588-591

50. Tribological Behavior of Diamond Reinforced Fe Co Composite by Taguchi Method

Öksüz K. E., Şimşir M., Şahin Y.

18th International Conference on Composite Materials, Jeju-Si, Güney Kore, 21 - 26 Ağustos 2011, cilt.1, ss.1-6, (Tam Metin Bildiri)

51. AISI 4140 ve DIN 100Cr6 Çeliklerine Fiziksel Buhar Biriktirme Yöntemi Kullanılarak Yapılmış CrN Kaplamanın Karakterizasyonu

ŞİMŞİR M., KUL M., Kara M., Çil G., Volkan H.

1.Uluslararası Yüzey İşlemleri Sempozyumu, 15 - 18 Haziran 2011, ss.736-745, (Tam Metin Bildiri)

52. Investigation of the wear behavior of B4C reinforced Fe/Co matrix composites produced by hot press

Şimşir M., Öksüz K. E., Şahin Y.

11th International Conference on the Mechanical Behavior of Materials (ICM), Como, İtalya, 01 Ocak 2011, cilt.10, ss.3195-3201, (Tam Metin Bildiri)

53. Soğuma Hızının Çelik Takviyeli Dökme Demirin Ara Yüzey Dayancı ve Mikroyapıya Etkisi

ŞİMŞİR M., ÖKSÜZ K. E.

3.Isıl İşlem Sempozyumu ve Sergisi, İstanbul, Türkiye, 14 - 15 Kasım 2009, ss.52-61, (Tam Metin Bildiri)

Kitaplar 8

6. Powder Metallurgy for Automotive Aluminium Alloys Hard and Super Hard Materials Book Composites Chapter 25: Investigation of Mechanical Behavior of B4C/Diamond Reinforced Fe/Co Metal Matrix Composites Produced by PM

Şimşir M., Öksüz K. E., Şahin Y.

Powder Metallurgy for Automotive Aluminium Alloys Hard and Super Hard Materials Book, P.Ramakrishan, Editör, MEDTEC Publisher, Scientific Int.Pvt.Ltd., Pune, ss.203-209, 2014

7. High Performance and Optimum Design of Structures and Materials Book Section:11 Surface Modification

Öksüz K. E., Gün T., Şimşir M.

High Performance and Optimum Design of Structures and Materials Book, W.P. De Wilde,Vrije Universiteit Brussel,Belgium S. Hernández,University of A Coruña,Spain C.A. Brebbia,Wessex Institute of Technology,UK, Editör, WIT Press , London, ss.545-552, 2014

8. Section 11. Surface Modification

ÖKSÜZ K. E., Gün T., ŞİMŞİR M.

High Performance and Optimum Design of Structures and Materials Book, W.P. De Wilde, S. Hernández, C.A. Brebbia, Editör, WIT Press , ss.545-552, 2014

Metrikler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

176

H-İndeks (WoS)

Atıf (Scopus)

237

H-İndeks (Scopus)

Atıf (Scholar)

108

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Atıf (Diğer Toplam)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Atıf (Diğer Toplam)

Proje

Tez Danışmanlığı

Açık Erişim