| AVESİS

Yayın Türü

Yayın Alt Türü

(WOS) Araştırma Alanları

SDG

Araştırmacılar

Yıl


Microalgae to Biofuel: Cutting-Edge Harvesting and Extraction Methods for Sustainable Energy Solution Ahmed A. S., Ali A., GÖRGÜN E., Jameel M., Khandaker T., Islam M. S., et al. Energy Science and Engineering , cilt.13, sa.7, ss.3525-3540, 2025 (SCI-Expanded)
Yüksek Basınçlı Sıcak Proses Geçiş Hatlarında Bağlantı Mikroyapı ve Mekanik Özelliklerinin Araştırılması Mercan S., Kaptan A. Black Sea Journal of Engineering and Science , cilt.8, sa.6, ss.1748-1758, 2025 (TRDizin)
Sustainable Reinforcement of PLA Composites with Waste Beech Sawdust for Enhanced 3D-Printing Performance Kartal F., KAPTAN A. Journal of Materials Engineering and Performance , cilt.34, sa.14, ss.15248-15259, 2025 (SCI-Expanded)
Investigation of the Effect of Exposure to Liquid Chemicals on the Strength Performance of 3D-Printed Parts from Different Filament Types KAPTAN A. Polymers , cilt.17, sa.12, 2025 (SCI-Expanded)
Microstructural behavior and explainable machine learning aided mechanical strength prediction and optimization of recycled glass-based solid waste concrete Sobuz M. H. R., Kabbo M. K. I., Alahmari T. S., Ashraf J., GÖRGÜN E., Khan M. M. H. Case Studies in Construction Materials , cilt.22, 2025 (SCI-Expanded)
Comprehensive and essential review of advanced researches abrasive waterjet machining Kartal F., Kaptan A. International Advanced Researches and Engineering Journal , cilt.9, sa.1, ss.50-69, 2025 (Hakemli Dergi)
ENHANCED CORROSION RESISTANCE OF X120MN12 STEEL IN ACIDIC MEDIA BY A NOVEL NANOLIGNIN-BASED PROTECTIVE COATING Görgün E., Ersan M. Black Sea Journal of Engineering and Science , cilt.8, sa.4, ss.1067-1075, 2025 (Hakemli Dergi)
From Biomass to Biofuel: Innovative Microwave-Assisted Rapid Hydrothermal Liquefaction of Palm Kernel Shells Ahmed A. S., Islam M. S., Banggan M., GÖRGÜN E., Jameel M., Ali A., et al. International Journal of Chemical Engineering , cilt.2025, sa.1, 2025 (SCI-Expanded, Scopus)
A critical review of composite filaments for fused deposition modeling: Material properties, applications, and future directions Kaptan A., Kartal F. European Mechanical Science , cilt.8, sa.3, ss.199-209, 2024 (Hakemli Dergi)
Response of PLA Material to 3D Printing Speeds: A Comprehensive Examination on Mechanical Properties and Production Quality Kartal F., Kaptan A. European Mechanical Science , cilt.8, sa.1, ss.1-12, 2024 (Hakemli Dergi)
SMAW PARAMETRELERİNİN AH36 BAĞLANTI ÖZELLİKLERİNE VE DENİZ SUYUNUN KİMYASAL BİLEŞİMİNE ETKİSİNİN ARAŞTIRILMASI Görgün E. International Journal of Innovative Engineering Applications , cilt.8, sa.1, ss.28-36, 2024 (Hakemli Dergi)
Improved methane production from ultrasonically-pretreated secondary sedimentation tank sludge and new model proposal: Time series (ARIMA) Şenol H., TÜRK ÇAKIR İ., Bianco F., GÖRGÜN E. Bioresource Technology , cilt.391, 2024 (SCI-Expanded)
Ultrasonic testing and surface conditioning techniques for enhanced thermoplastic adhesive bonds GÖRGÜN E. Journal of Mechanical Science and Technology , cilt.38, sa.3, ss.1227-1236, 2024 (SCI-Expanded)
Advancements in polylactic acid research: From material properties to sustainable applications KAPTAN A., KARTAL F. European Mechanical Science , cilt.8, sa.2, ss.1-11, 2024 (Hakemli Dergi)
Numerical analysis of inflow turbulence intensity impact on the stress and fatigue life of vertical axis hydrokinetic turbine GÖRGÜN E. Physics of Fluids , cilt.36, sa.1, 2024 (SCI-Expanded)
Influence of Process Parameters on Kerf Width in Abrasive Waterjet Machining of GFRP Composites KAPTAN A., MERCAN S., KARTAL F. Sivas Cumhuriyet Üniversitesi Bilim ve Teknoloji Dergisi , cilt.3, 2024 (Hakemli Dergi)
Biocomposites of Poly(Lactic Acid) and Microcrystalline Cellulose: Influence of the Coupling Agent on Thermomechanical and Absorption Characteristics GÖRGÜN E., Ali A., Islam M. S. ACS Omega , cilt.9, sa.10, ss.11523-11533, 2024 (SCI-Expanded)
The Effect of Channel Depth on Joint Quality in Cu/AISI 1040 Materials Joined by Mechanical Locking Method MERCAN S., KAPTAN A. TEHNICKI VJESNIK , cilt.31, sa.3, ss.744-752, 2024 (SCI-Expanded)
Increasing the Biomethane Yield of Hazelnut By-Products by Low Temperature Thermal Pretreatment ŞENOL H., OYAN M., GÖRGÜN E. Süleyman Demirel Üniversitesi Fen Edebiyat Fakültesi Fen Dergisi , cilt.19, sa.1, ss.18-28, 2024 (Hakemli Dergi)
Experimental investigation and optimization of the effect garnet vibratory tumbling as a post-process on the surface quality of 3D printed PLA parts KARTAL F., KAPTAN A. European Mechanical Science , cilt.8, sa.1, ss.19-28, 2024 (Hakemli Dergi)
Damaged surface morphology of AA6063/Cu30Zn parts joined with a new technology by friction-mechanical locking method MERCAN S., KAPTAN A. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.46, ss.1-15, 2024 (SCI-Expanded)
Artificial Neural Network and Multiple Regression Analysis for Predicting Abrasive Water Jet Cutting of Al 7068 Aerospace Alloy Kartal F., Kaptan A. SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES , cilt.42, sa.2, ss.1-15, 2024 (ESCI)
Effect of Filling Ratio-Pattern Parameters on Mechanical Properties of PLA Filaments Used in 3D Printing Kartal F., Kaptan A. Black Sea Journal of Engineering and Science , cilt.7, sa.1, ss.196-202, 2024 (Hakemli Dergi)
A review on Integration of Carbon Fiber and Polymer Matrix Composites in 3D Printing Technology Kaptan A., Kartal F. International Advanced Researches and Engineering Journal , cilt.8, sa.2, ss.1-16, 2024 (Scopus)
Enhancing the Tensile Behavior of Three-Dimensional Printed Polylactic Acid Composites through the Incorporation of Waste Beech Sawdust Kartal F., Kaptan A. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.33, sa.16, ss.1-15, 2024 (SCI-Expanded)
Mechanical Performance of Salvadora Persical (Miswak) Reinforced Polylactic Acid Matrix Composites for Three Dimensional Printing kartal f., KAPTAN A. Black Sea Journal of Engineering and Science , cilt.6, sa.4, ss.458-468, 2023 (Hakemli Dergi)
Investigating the Effect of Nozzle Diameter on Tensile Strength in 3D-Printed Printed Polylactic Acid Parts KAPTAN A., KARTAL F. Black Sea Journal of Engineering and Science , cilt.6, sa.3, ss.276-282, 2023 (Hakemli Dergi)
EXPERIMENTAL DETERMINATION OF THE OPTIMUM CUTTING TOOL FOR CNC MILLING OF 3D PRINTED PLA PARTS Kartal F., Kaptan A. International Journal of 3D Printing Technologies and Digital Industry , cilt.7, sa.2, ss.150-160, 2023 (Hakemli Dergi)
INFLUENCE OF ABRASIVE WATER JET TURNING OPERATING PARAMETERS ON SURFACE ROUGHNESS OF ABS AND PLA 3D PRINTED PARTS MATERIALS Kartal F., Kaptan A. International Journal of 3D Printing Technologies and Digital Industry , cilt.7, sa.2, ss.184-190, 2023 (Hakemli Dergi)
Effects of annealing temperature and duration on mechanical properties of PLA plastics produced by 3D Printing KARTAL F., KAPTAN A. European Mechanical Science , cilt.7, sa.3, ss.152-159, 2023 (Hakemli Dergi)
Strength Performance Evaluations of Vehicle Cylindrical LPG Tanks Kaptan A., Kişioğlu Y. JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , ss.1-13, 2023 (ESCI)
3B YAZICIDA ÜRETİLEN DÜZ DİŞLİ ÇARKLARIN RTV2 SİLİKONU KULLANILARAK ÇOĞALTILMASI KARTAL F., NAZLI C., YERLİKAYA Z., KAPTAN A. International Journal of 3D Printing Technologies and Digital Industry , cilt.5, sa.1, ss.34-42, 2021 (Hakemli Dergi)
IL-13 gene polymorphisms (-1112 C/T and-1512 A/C) in patients with chronic and aggressive periodontitis: Effects on GCF and outcome of periodontal therapy GÖRGÜN E., Toker H., TAŞ A., Alpan A. L., Sari I., SİLİĞ Y. NIGERIAN JOURNAL OF CLINICAL PRACTICE , cilt.24, sa.7, ss.965-972, 2021 (SCI-Expanded)
Biogas production from the co-digestion of urban solid waste and cattle manure ŞENOL H., ERŞAN M., GÖRGÜN E. Avrupa Bilim ve Teknoloji Dergisi , cilt.0, ss.396-403, 2020 (Hakemli Dergi)
The Effect of Fill Rate on Mechanical Properties of PLA Printed Samples Kaptan A., Kartal F. Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.10, sa.3, ss.1919-1927, 2020 (Hakemli Dergi)
Ultrasonic testing to measure the stress statement of steel parts GÖRGÜN E., KARAMIŞ M. B. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.33, sa.7, ss.3231-3236, 2019 (SCI-Expanded)
Wear resistance of Polymethyl Methacrylate (PMMA) with the Addition of Bone Ash, Hydroxylapatite and Keratin GÖRGÜN E., AKKUŞ A., KARAMIŞ M. B. Materials Science and Engineering , cilt.295, ss.1-8, 2018 (SCI-Expanded)
Charpy Impact Resistances of Carbon Nanotubes Reinforced High Density Polyethylene Nanocomposite Materials MİRİK M., EKİNCİ Ş., TAŞYÜREK M. International Journal of Materials, Mechanics and Manufacturing , 2016 (Hakemli Dergi)
Relationship between Deflection and Contact Area of Drive Tire EKİNCİ Ş., ÇARMAN K., TAŞYÜREK M., MİRİK M. International Journal of Materials, Mechanics and Manufacturing , 2016 (Hakemli Dergi)
Effects of Material and Cold Air Temperature Conditions on Safflower Biodiesel Viscosity and Evaluation with Anova Taguchi TAŞYÜREK M., MİRİK M., EKİNCİ Ş., ACAROĞLU M. International Journal of Materials, Mechanics and Manufacturing , 2016 (Hakemli Dergi)
Investigation of Mechanical Properties of Carbon Nanotubes High Density Polyethylene Composites Produced by Extrusion Method TAŞYÜREK M., EKİNCİ Ş., MİRİK M. ATINER CONFERENCE PAPER SERIES No: TEN2014-1377 , ss.3-14, 2015 (Hakemli Dergi)
Notch Impact Resistances of Carbon Nanotubes Reinforced High Density Polyethylene Nanocomposite Materials MİRİK M., TAŞYÜREK M., EKİNCİ Ş. Journal of Chemical Engineering and Chemistry Research , cilt.2, sa.9, ss.799-806, 2015 (Hakemli Dergi)
CEVAP YÜZEY YÖNTEMİ İLE OPTİMİZASYON YÖNTEMİNİN MALZEME BİLİMİNDE UYGULAMALARI ERŞAN M., GÖRGÜN E. Mühendislikte Güncel Araştırmalar, SELEHATTİN BARDAK, Editör, GECE KİTAPLIĞI, Sivas, ss.1-10, 2022
HAVACILIKTA TEMEL UÇAK BAKIM KONULARI - Kavramsal ve Sistemsel Yaklaşımlar Mirik M. HAVACILIKTA TEMEL UÇAK BAKIM KONULARI - Kavramsal ve Sistemsel Yaklaşımlar, Doç. Dr. Levent Yiğittepe,Dr. Öğr. Üyesi Mustafa Taşyürek, Editör, Nobel Yayın Dağıtım, Ankara, ss.171-209, 2021
Optimization of Fused Deposition Method (FDM) 3D Printer Parameters: An Experimental and Data-Driven Investigation on Tensile Strength and Surface Roughness with Polyethylene Terephthalate Glycol (PETG) Filament Kaptan A. 12. International Conference on Materials Science and Nanotechnology for Next Generation, Sivas, Türkiye, 10 - 12 Eylül 2025, ss.1-10, (Tam Metin Bildiri)
Comparison of Mechanical Properties of Engineering Filaments for FDM 3D Printing Kartal F., Kaptan A. 6TH INTERNATIONAL CONFERENCE ON SCIENTIFIC AND ACADEMIC RESEARCH, Konya, Türkiye, 19 - 20 Mart 2025, ss.74-88, (Tam Metin Bildiri)
INTERNATIONALDIFFERENTIAL DIAGNOSIS OF LESIONS IN PATIENTS WITH PET / CT FOR ONCOLOGICAL PURPOSES USING XGB AND LGBM MACHINE LEARNING ALGORITHMS HASBEK A., ERŞAN M., GÖRGÜN E. 6. INTERNATIONAL BLACK SEA MODERN SCIENTIFIC RESEARCH CONGRESS, Trabzon, Türkiye, 24 Ağustos 2024, (Tam Metin Bildiri)
Part Production Time Estimation Model in 3d Printer: DataBased Machine Learning Approach And Parameter Analysis Kaptan A. II. INTERNATIONAL CONFERENCE ON SCIENTIFIC AND INNOVATION RESEARCH, Sivas, Türkiye, 15 - 17 Eylül 2023, ss.1226-1241, (Tam Metin Bildiri)
Machinability of AISI 304 Austenitic Stainless Steel by Abrasive Waterjet Processing Kaptan A., Kartal F. 13. ULUSLARARASI EJONS MATEMATİK-MÜHENDİSLİK-FEN VE SAĞLIK BİLİMLERİ KONGRESİ, Nevşehir, Türkiye, 25 - 26 Ekim 2021, ss.281-287, (Tam Metin Bildiri)
THE EFFECT OF ANNEALING PROCESS APPLIED TO PLA PARTS MANUFACTURED BY FUSED DEPOSITION MODELING ON MECHANICAL PROPERTIES Kaptan A., Kartal F. 2nd INTERNATIONAL HALICH CONGRESS ON MULTIDISCIPLINARY SCIENTIFIC RESEARCH, İstanbul, Türkiye, 29 - 30 Ekim 2021, ss.496-502, (Tam Metin Bildiri)
THE MEASUREMENT OF RESIDUAL STRESS ON RAILWAY WHEELS MATERIAL AND ANALYSIS BY LINEAR REGRESSION METHOD GÖRGÜN E., KARAMIŞ M. B. MAS 6th INTERNATIONAL EUROPEAN CONFERENCE ONMATHEMATICS, ENGINEERING, NATURALMEDICALSCIENCES, Kiev, Ukrayna, 12 - 14 Temmuz 2019, ss.151-161, (Tam Metin Bildiri)
INVESTIGATION OF THERMAL PRETREATMENT EFFECT FORANAEROBIC DIGESTION OF HAZELNUT WASTES ŞENOL H., ERŞAN M., GÖRGÜN E. 30 AĞUSTOS BİLİMSEL ARAŞTIRMALAR SEMPOZYUMU, 28 - 31 Ağustos 2019, (Tam Metin Bildiri)
The Investigation of the Carbon Nanotubes Reinforced High Density Polyethylene Nanocomposite Materials at Low Temperature Mechanical Properties MİRİK M., TAŞYÜREK M., TARAKÇIOĞLU N. 2. International Conference on Science, Ecology and Technology, Barcelona, İspanya, 14 - 16 Ekim 2016, ss.54-62, (Tam Metin Bildiri)
The Investigation of the Carbon Nanotubes Reinforced High Density Polyethylene Nanocomposite Materials at Low Temperature Tensile Strength MİRİK M., TAŞYÜREK M., TARAKÇIOĞLU N. International Conference on Natural Science and Engineering, Kilis, Türkiye, 19 - 20 Mart 2016, ss.22-23, (Özet Bildiri)
Relationship between Deflection and Contact Area of Drive Tire EKİNCİ Ş., ÇARMAN K., TAŞYÜREK M., MİRİK M. International Conference on Advanced research in Aerospace, Robotics, Manufacturing Systems, Mechanical Engineering, Bioengineering, Neurorehabilitation, Materials Engineering, Renewable Energy, Bioenergy and Human Motricities, Köstence, Romanya, 26 - 29 Haziran 2015, (Tam Metin Bildiri)
Charpy Impact Resistances of Carbon Nanotubes Reinforced High Density Polyethylene Nanocomposite Materials MİRİK M., EKİNCİ Ş., TAŞYÜREK M. International Conference on Advanced research in Aerospace, Robotics, Manufacturing Systems, Mechanical Engineering, Bioengineering, Neurorehabilitation, Materials Engineering, Renewable Energy, Bioenergy and Human Motricities, Köstence, Romanya, 26 - 29 Haziran 2015, (Tam Metin Bildiri)
Effects of Material and Cold Air Temperature Conditions on Safflower Biodiesel Viscosity and Evaluation with Anova Taguchi TAŞYÜREK M., MİRİK M., EKİNCİ Ş., ACAROĞLU M. International Conference on Advanced research in Aerospace, Robotics, Manufacturing Systems, Mechanical Engineering, Bioengineering, Neurorehabilitation, Materials Engineering, Renewable Energy, Bioenergy and Human Motricities, Köstence, Romanya, 26 - 29 Haziran 2015, (Tam Metin Bildiri)
Investigation of Mechanical Properties of Carbon Nanotubes High Density Polyethylene Composites Produced by Extrusion Method TAŞYÜREK M., EKİNCİ Ş., MİRİK M. Second Annual International Conference on Industrial, Systems and Design Engineering&Annual International Conference on Technology and Engineering, Atina, Yunanistan, 23 - 26 Haziran 2014, (Özet Bildiri)
Notch impact resistances of carbon nanotubes reinforced highdensity polyethylene nanocomposite materials MİRİK M., TAŞYÜREK M., EKİNCİ Ş. Modeling & Design of Molecular Materials 2014, Kudowa-Zdrój, Polonya, 29 Haziran - 03 Temmuz 2014, (Özet Bildiri)
KARBON NANOTÜP TAKVİYELİ YÜKSEK YOĞUNLUKLU POLİETİLEN YYPE NANOKOMPOZİT MALZEMELERİN MEKANİK ÖZELLİKLERİNİN ARAŞTIRILMASI MİRİK M., TARAKÇIOĞLU N., ŞAHİN Ö. S., TAŞYÜREK M., DEMİRCİ M. T. 9. ULUSLARARASI KIRILMA KONFERANSI, İstanbul, Türkiye, 19 - 21 Ekim 2011, ss.182-192, (Tam Metin Bildiri)