Prof. MEHMET BULUT

Metrics

Publication

Publication (WoS)

Publication (Scopus)

Citation (Scopus)

1208

H-Index (Scopus)

Citation (TrDizin)

H-Index (TrDizin)

Project

Open Access

UN Sustainable Development Goals

Education

2013 - 2017

Doctorate

Gaziantep University, Turkey

2010 - 2013

Postgraduate

Gaziantep University, Turkey

Dissertations

2017

Doctorate

Investigation of impact behavior of laminated hybrid composite plates

Gaziantep University, fen

2013

Postgraduate

Free vibration of laminated hybrid composite plates

Gaziantep University

Research Areas

Engineering and Technology

Research Areas Based on Academic Activities

Avesis Research Areas

WoS Research Areas

Scopus Research Areas

Academic Positions

2026 - Present

Professor

Sivas Cumhuriyet University, Sivas Teknik Bilimler Meslek Yüksekokulu, Makine Ve Metal Teknolojileri

2022 - 2024

Associate Professor

Sivas Cumhuriyet University, Mühendislik Fakültesi, Makine Mühendisliği

2020 - 2022

Associate Professor

Hakkari University, Mühendislik Fakültesi, Makine Mühendisliği

2017 - 2020

Assistant Professor

Hakkari University, Mühendislik Fakültesi, Makine Mühendisliği

2013 - 2017

Research Assistant

Gaziantep University, Fen Bilimleri Enstitüsü, Makine Mühendisliği

2010 - 2013

Research Assistant

Gaziantep University, Fen Bilimler Enstitüsü, Makine Mühendisliği

Managerial Experience

2017 - 2022

Head of Department

Hakkari University, Mühendislik Fakültesi, Makine Mühendisliği

Articles

2025

1. The Influence of Fiber Stacking Sequence on the Mechanical and Impact Performance of Sustainable Epoxy/Basalt/Aramid-Balsa Sandwich Composites

Fadıl D., Erkliğ A., BULUT M.

Polymers for Advanced Technologies , vol.36, no.12, 2025 (SCI-Expanded, Scopus)

2025

2. Recycled PET particle effects on mechanical and dynamic properties of GFRP composites

Bulut M., Ertürk L., Demir A.

Emerging Materials Research , vol.14, no.4, pp.361-371, 2025 (SCI-Expanded, Scopus)

2025

3. Investigation of Mechanical and Impact Properties of Hemp Fiber Reinforced Epoxy-Based Nanocomposites

Erkliğ A., Kesen E., Doğan N. F., BULUT M.

Polymer Composites , vol.46, no.16, pp.15369-15380, 2025 (SCI-Expanded, Scopus)

2025

4. Enhancement of mode I/II fracture toughness in basalt/Kevlar hybrid composites via multiwall carbon nanotube integration

Bulut M., Bozkurt Ö. Y., Erkliğ A., Abdo A. R.

INTERNATIONAL POLYMER PROCESSING , vol.40, no.5, pp.636-648, 2025 (SCI-Expanded, Scopus)

2025

5. Evaluation of mechanical properties of basalt and aramid fiber reinforced hybrid composites with polyvinyl chloride (PVC) core material

Fadıl D., Erkliğ A., BULUT M.

International Polymer Processing , vol.40, no.5, pp.535-547, 2025 (SCI-Expanded, Scopus)

2025

6. Investigation of Mechanical Properties of Polymer Matrix Composites Reinforced with Waste Iron Powder

BULUT M., ERTÜRK L.

CUMHURIYET SCIENCE JOURNAL , vol.46, 2025 (TRDizin)

2025

7. Mechanical characterization of Kevlar/basalt fiber/epoxy hybrid composites containing multiwalled carbon nanotube particles

Sulaiman B. H., Erkliäÿ A., Bozkurt Ö. Y., Abdo A. R., BULUT M.

International Journal of Materials Research , vol.116, no.8, pp.635-644, 2025 (SCI-Expanded, Scopus)

2025

8. Wear resistance of cams made of lamellar and spheroidal graphite cast iron with different surface treatments

ARSLANBULUT E., BULUT M., SELÇUK B.

Physica Scripta , vol.100, no.6, 2025 (SCI-Expanded, Scopus)

2025

9. Effect of graphene nanoplatelets (GnPs) on low velocity impact properties of hybrid kevlar/basalt fiber reinforced epoxy based composites

BULUT M., Abdo A. R., Sulaiman B. H., Bozkurt Ö. Y., Erkliğ A.

International Polymer Processing , vol.40, no.2, pp.233-242, 2025 (SCI-Expanded, Scopus)

2025

10. Multiwalled Carbon Nanotube Inclusion Effects on Low Velocity Impact Properties of Kevlar/Basalt Fiber/Epoxy Hybrid Composites

BULUT M., Bozkurt Ö. Y., Abdo A. R., Erkliğ A., Sulaiman B. H.

Polymers for Advanced Technologies , vol.36, no.5, 2025 (SCI-Expanded, Scopus)

2025

11. Investigation of thermal energy storage capacities of phase change material embedded different bio-based materials converted into biochar

Coşkun B., Temel Ü. N., Bulut M.

Physica Scripta , vol.100, no.3, 2025 (SCI-Expanded, Scopus)

2025

12. Graphene nanoplatelets inclusion effects on mechanical properties of hybrid carbon/glass composites

Erkliğ A., Bulut M., Al-Ogaidi B. R. Y.

IRANIAN POLYMER JOURNAL (ENGLISH EDITION) , vol.34, no.2, pp.1-18, 2025 (SCI-Expanded, Scopus)

2025

13. Graphene nanoplatelets inclusion effects on mechanical properties of the hybrid kevlar/basalt fiber reinforced epoxy composites

Abdo A. R., Bulut M., Sulaiman B. H., Bozkurt Ö. Y., Erkliğ A.

Physica Scripta , vol.100, no.1, pp.15009-150018, 2025 (SCI-Expanded, Scopus)

2025

14. Investigation of the effect of the use of waste toys as recycling material in glass-fiber reinforced composites on mechanical properties

BULUT M.

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , 2025 (ESCI)

2024

15. An investigation on usage of marble dust as an additive in concrete surrounding Sivas

BULUT M., COŞKUN B.

Sivas Cumhuriyet Üniversitesi Mühendislik Fakültesi Dergisi , vol.2, no.2, pp.223-227, 2024 (Peer-Reviewed Journal)

2024

16. Investigation of axial buckling behavior in composite laminates reinforced with S-glass fiber and epoxy featuring double cutouts

BULUT M., Erklig A.

Physica Scripta , vol.99, no.8, 2024 (SCI-Expanded, Scopus)

2024

17. Effectiveness of multi-walled carbon nanotube on the improvement of tensile, flexural, and low-velocity impact properties of hybrid Kevlar/carbon fiber reinforced epoxy-based composites

Sulaiman B. H., Abdo A. R., Erkliğ A., Bozkurt Ö. Y., BULUT M.

Polymer Composites , vol.45, no.8, pp.7647-7660, 2024 (SCI-Expanded, Scopus)

2024

18. Effectiveness of double cutout on lateral buckling analysis of fiber reinforced composites

Bulut M.

POLYMER COMPOSITES , vol.45, no.12, pp.10880-10887, 2024 (SCI-Expanded, Scopus)

2024

19. A comparative study on adhesive properties of nanoparticle reinforced epoxy bonded single-strap repaired composites

Karaoǧlan H., Erkliǧ A., Doǧan N. F., BULUT M.

International Polymer Processing , vol.39, no.1, pp.70-79, 2024 (SCI-Expanded, Scopus)

2024

20. SiO nanoparticle modified CFRP composites effecting on mechanical and vibration damping properties

Bozkurt Y. T., BULUT M., Erkliğ A., Özbek Ö.

Polymer Composites , vol.45, no.1, pp.169-180, 2024 (SCI-Expanded, Scopus)

2023

21. Vibration damping properties of graphene nanoplatelets filled glass/carbon fiber hybrid composites

Erkliǧ A., Younus B., Doǧan N. F., Alsaadi M., BULUT M., Sulaiman B. H.

International Polymer Processing , vol.38, no.2, pp.145-153, 2023 (SCI-Expanded, Scopus)

2023

22. Numerical thermo-mechanical analysis of a railway train wheel

Bulut M., Karagöz N., Ibrahim Acar H. İ., DUMAN N.

Materialpruefung/Materials Testing , vol.65, no.5, pp.733-742, 2023 (SCI-Expanded, Scopus)

2022

23. Effect of olive pomace particles content on mode I and mode II delamination fracture of S-glass fiber reinforced composites

BULUT M., Alsaadi M., Erkliğ A.

Polymer Composites , vol.43, no.2, pp.1157-1167, 2022 (SCI-Expanded, Scopus)

2022

24. Effect of nano clay particle inclusion on axial and lateral buckling characteristics of basalt fiber reinforced composites Nano kil parçacik ilavesinin bazalt fiber takviyeli kompozit plakalarin eksenel ve yanal burkulma özelliklerine etkisi

BULUT M., Özbek Ö., Bozkurt Ö. Y., Erkliǧ A.

Journal of the Faculty of Engineering and Architecture of Gazi University , vol.37, no.4, pp.1985-1995, 2022 (SCI-Expanded, Scopus, TRDizin)

2021

25. Effect of graphene nano-platelets on mechanical and impact characteristics of carbon/Kevlar reinforced epoxy hybrid nanocomposites

Alsaadi M., Younus B., Erklig A., BULUT M., Bozkurt O., Sulaiman B.

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , vol.235, no.23, pp.7139-7151, 2021 (SCI-Expanded, Scopus)

2021

26. Fatigue Life and Stress Analysis of the Crankshaft of a Single Cylinder Diesel Engine under Variable Forces and Speeds

Bulut M., Cihan O., TEMİZER İ.

MATERIALS TESTING , vol.63, no.8, pp.770-777, 2021 (SCI-Expanded, Scopus)

2020

27. Stress and deformation analysis of a connecting rod by using ANSYS

BULUT M., CİHAN Ö.

International Journal of Automotive Engineering and Technologies , 2020 (TRDizin)

2020

28. An experimental investigation on dynamic and mechanical characterization of olive pomace-filled glass/epoxy composite laminates

Erkliğ A., BULUT M., Shihan A.

Journal of the Brazilian Society of Mechanical Sciences and Engineering , vol.42, no.10, 2020 (SCI-Expanded, Scopus)

2020

29. The Effects of Nanosilica and Nanoclay Particles Inclusions on Mode II Delamination, Thermal and Water Absorption of Intraply Woven Carbon/Aramid Hybrid Composites

BULUT M., Alsaadi M., Erklig A.

International Polymer Processing , vol.35, no.4, pp.367-375, 2020 (SCI-Expanded, Scopus)

2020

30. Low-Velocity Impact Tests on Basalt Fiber/Polypropylene Core Honeycomb Sandwich Composites

BULUT M.

Mechanics of Composite Materials , vol.56, no.1, pp.121-130, 2020 (SCI-Expanded, Scopus)

2020

31. Mechanical and Dynamic Properties of Basalt Fiber-Reinforced Composites with Nanoclay Particles

BULUT M., Bozkurt Ö. Y., Erkliğ A., Yaykaşlı H., Özbek Ö.

Arabian Journal for Science and Engineering , vol.45, no.2, pp.1017-1033, 2020 (SCI-Expanded, Scopus)

2019

32. CFD Analysis of Exhaust Manifold for Different Designs

CİHAN Ö., BULUT M.

European Mechanical Science , vol.3, no.4, pp.147-152, 2019 (TRDizin)

2019

33. A comparative study on the interlaminar shear strength of S-glass/epoxy composites containing borax, perlite and sewage sludge ash particles

BULUT M., Alsaadi M., Erkliǧ A.

Materials Research Express , vol.6, no.9, 2019 (SCI-Expanded, Scopus)

2019

34. Torsional behavior of thin section glass fiber/epoxy composite filament wound tubes: Numerical modelling

BULUT M.

European Mechanical Science , vol.3, no.2, pp.52-55, 2019 (TRDizin)

2019

35. Mechanical and low velocity impact characterization of carbon/glass hybrid composites with graphene nanoplatelets

Doǧan N. F., BULUT M., Erkliǧ A., Bozkurt O. Y.

Materials Research Express , vol.6, no.8, 2019 (SCI-Expanded, Scopus)

2019

36. The effects of S-glass fiber hybridization on vibration-damping behavior of intraply woven carbon/aramid hybrid composites for different lay-up configurations

BULUT M., Alsaadi M., Erkliğ A., Alrawi H.

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , vol.233, no.9, pp.3220-3231, 2019 (SCI-Expanded, Scopus)

2019

37. Axial and lateral buckling analysis of fiber reinforced S-glass/epoxy composites containing nano-clay particles

Bozkurt Ö. Y., BULUT M., Erkliğ A., Faydh W. A.

Composites Part B: Engineering , vol.158, pp.82-91, 2019 (SCI-Expanded, Scopus)

2019

38. Vibration-damping characterization of the basalt/epoxy composite laminates containing graphene nanopellets

BULUT M., Erklig A., Kanmaz P.

Science and Engineering of Composite Materials , vol.26, no.1, pp.147-153, 2019 (SCI-Expanded, Scopus)

2018

39. A numerical investigation on vibration analysis of fiber reinforced and truncated conical hollow shells with different fiber orientations

BULUT M.

Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi , vol.8, pp.259-269, 2018 (TRDizin)

2018

40. Nano-silica inclusion effects on mechanical and dynamic behavior of fiber reinforced carbon/Kevlar with epoxy resin hybrid composites

Alsaadi M., BULUT M., Erkliğ A., Jabbar A.

Composites Part B: Engineering , vol.152, pp.169-179, 2018 (SCI-Expanded, Scopus)

2018

41. Vibration analysis of carbon and Kevlar fiber reinforced composites containing SiC particles

BULUT M.

SAKARYA UNIVERSITY JOURNAL OF SCIENCE , vol.22, no.5, pp.1423-1431, 2018 (TRDizin)

2018

42. An experimental investigation on damage characteristics of laminated hybrid composites subjected to low velocity impact

BULUT M., Erkliğ A.

Polymer Composites , vol.39, no.9, pp.3129-3139, 2018 (SCI-Expanded, Scopus)

2018

43. Mixed-mode I/III fracture toughness of polymer matrix composites toughened with waste particles

Alsaadi M., Erkliǧ A., BULUT M.

Science and Engineering of Composite Materials , vol.25, no.4, pp.679-687, 2018 (SCI-Expanded, Scopus)

2018

44. Tensile and impact characterization of S-glass/epoxy composite laminates containing microscale borax, perlite, and sewage sludge ash particles

BULUT M., Alsaadi M., Erkliğ A.

Journal of the Brazilian Society of Mechanical Sciences and Engineering , vol.40, no.4, 2018 (SCI-Expanded, Scopus)

2018

45. Toughening Effect of Microscale Particles on the Tensile and Vibration Properties of S-Glass-Fiber-Reinforced Epoxy Composites

Erkliğ A., BULUT M., Fayzulla B.

Mechanics of Composite Materials , vol.54, no.1, pp.119-128, 2018 (SCI-Expanded, Scopus)

2018

46. The investigation of quasi-static indentation effect on laminated hybrid composite plates

BULUT M., Erkliğ A.

Mechanics of Materials , vol.117, pp.225-234, 2018 (SCI-Expanded, Scopus)

2018

47. A comparative study on the tensile and impact properties of Kevlar, carbon, and S-glass/epoxy composites reinforced with SiC particles

BULUT M., Alsaadi M., Erkliǧ A.

Materials Research Express , vol.5, no.2, 2018 (SCI-Expanded, Scopus)

2018

48. Hybridization effects on charpy impact behavior of basalt/aramid fiber reinforced hybrid composite laminates

Bozkurt Ö. Y., Erkliğ A., BULUT M.

Polymer Composites , vol.39, no.2, pp.467-475, 2018 (SCI-Expanded, Scopus)

2017

49. Charpy Impact Response of Glass Fiber Reinforced Composite with Nano Graphene Enhanced Epoxy

ERKLİĞ A., DOĞAN N. F., BULUT M.

Periodicals of Engineering and Natural Sciences , vol.5, no.3, 2017 (Scopus)

2017

50. Mechanical characterization of Basalt/epoxy composite laminates containing graphene nanopellets

BULUT M.

Composites Part B: Engineering , vol.122, pp.71-78, 2017 (SCI-Expanded, Scopus)

2017

51. On adhesive properties of perlite and sewage sludge ash with epoxy resin bonded single-strap repairs

BULUT M., Erkliǧ A., Doǧan N. F.

Materials Research Express , vol.4, no.8, 2017 (SCI-Expanded, Scopus)

2017

52. Effects of stacking sequence on mechanical properties of hybrid composites reinforced with carbon, Kevlar and S-glass fibers

BULUT M., Erkliǧ A., Alsaadi M., Kchany S.

Materialpruefung/Materials Testing , vol.59, no.5, pp.472-479, 2017 (SCI-Expanded, Scopus)

2017

53. Experimental investigation on tensile and Charpy impact behavior of Kevlar/S-glass/epoxy hybrid composite laminates

Erkliǧ A., BULUT M.

Journal of Polymer Engineering , vol.37, no.2, pp.177-184, 2017 (SCI-Expanded, Scopus)

2016

54. The Influence of Fiber Orientation Angle on Damping and Vibration Properties of Basalt Fiber Reinforced Composite Laminates

BOZKURT Ö. Y., ÖZBEK Ö., BULUT M.

Journal of Civil, Structural and Transportation Engineering (JCSTE) , vol.2, pp.12-16, 2016 (Peer-Reviewed Journal)

2016

55. Hybridization effects on lateral buckling behavior of laminated composite beams

Yeter E., Erkliğ A., BULUT M.

Polymer Composites , vol.37, no.8, pp.2511-2521, 2016 (SCI-Expanded, Scopus)

2016

56. Yapıştırma ile Birleştirilmiş Cam Elyaf Takviyeli Kompozit Tabakaların Sönümleme ve Titreşim Davranışları

BOZKURT Ö. Y., ÖZBEK Ö., BULUT M.

Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi , vol.31, no.ÖS1, pp.61-68, 2016 (TRDizin)

2016

57. Hybridization effects on quasi-static penetration resistance in fiber reinforced hybrid composite laminates

BULUT M., Erkliǧ A., Yeter E.

Composites Part B: Engineering , vol.98, pp.9-22, 2016 (SCI-Expanded, Scopus)

2016

58. Experimental investigation on influence of Kevlar fiber hybridization on tensile and damping response of Kevlar/glass/epoxy resin composite laminates

BULUT M., Erkliǧ A., Yeter E.

Journal of Composite Materials , vol.50, no.14, pp.1875-1886, 2016 (SCI-Expanded, Scopus)

2016

59. Damping and vibration characteristics of basalt-aramid/epoxy hybrid composite laminates

BULUT M., Bozkurt Ö. Y., Erkliʇ A.

Journal of Polymer Engineering , vol.36, no.2, pp.173-180, 2016 (SCI-Expanded, Scopus)

2015

60. The effect of hybridization and boundary conditions on damping and free vibration of composite plates

Erkliʇ A., BULUT M., Yeter E.

Science and Engineering of Composite Materials , vol.22, no.5, pp.565-571, 2015 (SCI-Expanded, Scopus)

2014

61. Natural frequency response of laminated hybrid composite beams with and without cutouts

Erkliʇ A., BULUT M., Yeter E.

Journal of Polymer Engineering , vol.34, no.9, pp.851-857, 2014 (SCI-Expanded, Scopus)

2014

62. Hybridization effects on the buckling behavior of laminated composite plates

Yeter E., Erkliğ A., BULUT M.

Composite Structures , vol.118, no.1, pp.19-27, 2014 (SCI-Expanded, Scopus)

2013

63. The effects of cut-outs on lateral buckling behavior of laminated composite beams

Erkliǧ A., Yeter E., BULUT M.

Composite Structures , vol.104, pp.54-59, 2013 (SCI-Expanded, Scopus)

2013

64. Effects of cutouts on natural frequency of laminated composite plates

Erkliǧ A., BULUT M., Yeter E.

Science and Engineering of Composite Materials , vol.20, no.2, pp.179-185, 2013 (SCI-Expanded, Scopus)

Papers Presented at Peer-Reviewed Scientific Conferences

2025

1. DETERMINATION OF VON- MISES STRESSES ON A DOUBLE JOINT CARDAN SHAFT: NUMERICAL STUDY

BULUT M.

3rd International Thales Congress on Life, Engineering, Architecture, and Mathematics, Egypt, 24 - 25 April 2025, (Full Text)

2025

2. NUMERICAL VIBRATION COUPLED STRESS ANALYSIS OF CARDAN SHAFT BY USING COMPOSITE MATERIALS

BULUT M.

10th International Azerbaijan Congress on Life, Engineering, Mathematical, and Applied Sciences, Azerbaijan, 13 - 15 March 2025, (Full Text)

2019

3. Investigation of natural frequency using Ansys in a connecting rod

CİHAN Ö., BULUT M.

4. International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC), Ankara, Turkey, 18 - 20 October 2019, pp.455-457, (Full Text)

2019

4. Static stress and deformation analysis of a connecting rod by using Ansys

BULUT M., CİHAN Ö.

4. International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC), Ankara, Turkey, 18 - 20 October 2019, pp.446-450, (Full Text)

2018

5. KEVLAR VE KARBON FİBER İLE GÜÇLENDİRİLMİŞ HİBRİT KOMPOZİTLERİN TİTREŞİM ÖZELLİKLERİNİN DENEYSEL MODAL ANALİZ VE SONLU ELEMANLAR KULLANARAK BELİRLENMESİ

BULUT M.

III. ULUSLARARASI MESLEKİ VE TEKNİK BİLİMLER KONGRESİ, 21 - 22 June 2018, (Full Text)

2018

6. Torsional behaviour of thin section glass fiber/epoxy composite filament wound tubes: Numerical modelling

BULUT M.

1st International Conference on Materials Engineering Science, 8 - 09 August 2018, (Summary Text)

2017

7. Vibration Properties of Intraply Woven Carbon/Aramid Fiber Reinforced Composites with Nano Clay Particles

ERKLİĞ A., BULUT M., DOĞAN N. F.

ICAIE 2017- International Conference on Advances and Innovations in Engineering, 10 - 12 May 2017, (Full Text)

2017

8. Impact Performance of Intraply-Woven Carbon/Aramid Hybrid Composites with Nano-Clay Particles

BULUT M., ERKLİĞ A., BOZKURT Ö. Y.

ICAIE 2017- International Conference on Advances and Innovations in Engineering, 10 - 12 May 2017, (Full Text)

2017

9. Nano Silika Katkısının İç İçe Dokunmuş Karbon/Aramid Hibrit Fiber Takviyeli Kompozitlerin Düşük Hızlı Darbe Davranışına Etkileri

BOZKURT Ö. Y., ERKLİĞ A., BULUT M.

2.ULUSLARARASI SAVUNMA SANAYİ SEMPOZYUMU2017 ONUR KURULU, 6 - 08 April 2017, (Full Text)

2017

10. İç İçe Dokunmuş Karbon/Aramid ve Epoksi Kompozitlerin DarbeDavranışına Hibritleşmenin Etkileri

BOZKURT Ö. Y., ERKLİĞ A., BULUT M.

2.ULUSLARARASI SAVUNMA SANAYİ SEMPOZYUMU2017 ONUR KURULU, 6 - 08 April 2017, (Full Text)

2017

11. Charpy Impact Response of Glass Fiber Reinforced Composite with Nano Graphene Enhanced Epoxy Resin

ERKLİĞ A., DOĞAN N. F., BULUT M.

3rd INTERNATIONAL CONFERENCE ONENGINEERING AND NATURAL SCIENCES, 3 - 07 May 2017, (Full Text)

2017

12. On the Vibration Behavior of Intraply Woven Carbon/Kevlar Reinforced Composites with Nano Silica Particle

ERKLİĞ A., DOĞAN N. F., BULUT M.

3rd INTERNATIONAL CONFERENCE ONENGINEERING AND NATURAL SCIENCES, 3 - 07 May 2017, (Full Text)

2015

13. KEVLAR VE S CAMI İLE GÜÇLENDİRİLMİŞ HİBRİT KOMPOZİTLERİN TİTREŞİM ÖZELLİKLERİNİN BELİRLENMESİ

BULUT M., ERKLİĞ A., EYÜP Y.

XIX. ULUSAL MEKANİK KONGRESİ, Trabzon, Turkey, 24 - 28 August 2015, (Full Text)

2015

14. TABAKALI KOMPOZİT PLAKALARIN YARI STATİK PENETRASYON YÜKLERİ ALTINDAKİ DAVRANIŞLARININ ARAŞTIRILMASI

BULUT M., MERVE Ş., ERKLİĞ A., YURTCU N., DAŞTAN T.

XIX. ULUSAL MEKANİK KONGRESİ, Trabzon, Turkey, 24 - 28 August 2015, (Full Text)

2016

15. Influence of perlite particle inclusion with adhesively bonded single strap repairs on tensile properties of S-glass/epoxy composite laminates

ERKLİĞ A., BULUT M.

3rd International Conference on Advanced Technology Sciences (ICAT 2016), 1 - 03 September 2016, (Summary Text)

2016

16. The effect of micro particle reinforced adhesive on tensile strength of double lap joints

ERKLİĞ A., Al Ani Y. J., BULUT M., kütük M. A.

2nd International Conference on Engineering and Natural Sciences (ICENS 2016), 24 - 28 May 2016, (Full Text)

2016

17. The Influence of Borax Filler Addition on Damping and Vibration Response of S glass epoxy Composite Laminates

ERKLİĞ A., BULUT M.

International congress on Civil, Structural, and Environmental Engineering, 30 - 31 March 2016, (Full Text)

2016

18. Effect of Fibre Orientations on Damping and Vibration Characteristics of Basalt Epoxy Composite Laminates

BOZKURT Ö. Y., BULUT M., ÖZBEK Ö.

International congress on Civil, Structural, and Environmental Engineering, 30 - 31 March 2016, (Full Text)

2016

19. Tek tesirli yapıştırma bağlantılarında epoksi yapıştırıcı içerisindeki mikro boyuttaki perlitin hasar yüküne etkileri

ERKLİĞ A., BULUT M.

International Conference on Welding Technologies and Exhibition (ICWET’xx16), 11 - 13 May 2016, (Full Text)

2016

20. Damping and Vibration Behavior of Adhesively Bonded Composite Laminates

BOZKURT Ö. Y., ÖZBEK Ö., BULUT M.

International Conference on Welding Technologies and Exhibition (ICWET 16), 11 - 13 May 2016, (Full Text)

2012

21. Free Vibration of Composite Plates With Cut outs

BULUT M., ERKLİĞ A., KARACALI T., ÇAVUŞOĞLU B., ORAL E. A., ÖZBEK İ. Y.

2nd International Conference on Computation for Science and Technology, 16 - 18 September 2012, (Summary Text)

Funded Projects

2015 - 2018

Elyaf Sarma İşleminde Üretim Hızını Ve Esnekliğini Artırmaya Yönelik Yeni Bir Yöntem Uygulaması

TUBITAK Project , 1005 - National New Ideas and Products Research Support Program

Bozkurt Ö. Y., Erkliğ A.(Executive)

2014 - 2016