Publications & Works

Published journal articles indexed by SCI, SSCI, and AHCI

Metallurgical and Mechanical Characteristics of Friction Welded Joint of 27 wt.%CrWCI/AISI 1040 Steel

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, vol.74, no.11, pp.2739-2749, 2021 (SCI-Expanded) identifier identifier

Investigation on mechanical properties of solution strengthened and austempered ferritic ductile irons

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, vol.111, no.12, pp.976-982, 2020 (SCI-Expanded) identifier identifier

Effect of Alloy Content in Hardox450+FeW Composites Alloyed by PTAW on Wear Characteristic

PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES, vol.56, no.3, pp.584-590, 2020 (SCI-Expanded) identifier identifier

Effect of mechanical alloying on FeCrC reinforced Ni alloys

MATERIALS TESTING, vol.58, no.4, pp.337-342, 2016 (SCI-Expanded) identifier identifier

Wear behavior of iron boride coating on AISI 4140

PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES, vol.52, no.1, pp.119-127, 2016 (SCI-Expanded) identifier identifier

Weldability of AA6063 alloys by using Keyhole Gas Tungsten Arc Welding technique

KOVOVE MATERIALY-METALLIC MATERIALS, vol.52, no.4, pp.237-242, 2014 (SCI-Expanded) Creative Commons License identifier

Evaluation of the metallurgical and mechanical properties of friction-welded joints of dissimilar metal combinations AISI2205/Cu

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.66, pp.303-310, 2013 (SCI-Expanded) identifier identifier

The coating of FeB, FeTi, FeW powders on AISI 430 stainless steel by PTA

JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS, vol.15, pp.284-293, 2013 (SCI-Expanded) identifier identifier

The role of TiB2, Fe2B reinforcements on the wear rate of the coated AISI 430 stainless steel surface by PTA

KOVOVE MATERIALY-METALLIC MATERIALS, vol.51, no.6, pp.373-381, 2013 (SCI-Expanded) identifier

Weldability and joining characteristics of AISI 430/AISI 1040 steels using keyhole plasma arc welding

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.63, pp.117-128, 2012 (SCI-Expanded) identifier identifier

Effects of Co and Cr particles additions on phase transformation temperature of a Pb-Sn based alloy

JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS, vol.13, pp.422-424, 2011 (SCI-Expanded) identifier identifier

Study to evaluate the abrasive wear resistant behavior of materials coated with Fe-Cr-Si-C

KOVOVE MATERIALY-METALLIC MATERIALS, vol.49, no.4, pp.297-306, 2011 (SCI-Expanded) identifier

Articles Published in Other Journals

Türkiye’de Kaynakçılık Mesleğinde Meydana Gelen İş Kazalari ve Güvenlik Önlemleri

Adıyaman Üniversitesi, Mühendislik Bilimleri Dergisi, vol.7, no.12, pp.34-44, 2020 (Peer-Reviewed Journal)

YKBDD / Orta Karbonlu Çelik Çiftinin Nikel Ara Tabaka Kullanarak Sürtünme Kaynak Yöntemiyle Birleştirilmesi

Adıyaman Üniversitesi, Mühendislik Bilimleri Dergisi, vol.6, no.11, pp.86-94, 2019 (Peer-Reviewed Journal)

Demir-Niyobyum İkili Alaşımların Kutu Borlamasında Artan İşlem Sıcaklığının Borür Tabakasının Oluşumu Üzerindeki Etkisi

Adıyaman Üniversitesi, Mühendislik Bilimleri Dergisi, vol.4, no.6, pp.13-19, 2017 (Peer-Reviewed Journal)

Applications of Corneal Foreign Body Patients and Safety Eyewear Usage Rates

Adıyaman Üniversitesi Sağlık Bilimleri Dergisi, vol.2, no.2, pp.265-271, 2016 (Peer-Reviewed Journal)

Adıyaman Üniversitesi Sağlık Bilimleri Dergisi, vol.2, no.1, pp.187-196, 2016 (Peer-Reviewed Journal)

AISI 1040 Çelik Çiftinin KPTA Kaynağında Plazma Gaz Debisinin Nüfuziyet Üzerine Etkisi

Selçuk Üniversitesi, Teknik Bilimler Meslek Yüksekokulu, Teknik Online Derg, vol.11, no.1, pp.48-59, 2012 (Peer-Reviewed Journal)

Effect on Microstructure and Hardness of Synergic Controlled Pulsed (MIG-P) and Manual (MIG) Welding of AISI430/AISI1030 Steel Couples

Teknolojik Araştırmalar Dergisi, Makine Teknolojileri Elektronik Dergisi,, vol.8, no.3, pp.27-37, 2011 (Peer-Reviewed Journal)

Effect on Microstructure and Hardness of Synergic Controlled Pulsed (MIG-P) and Manual (MIG) Welding of AISI430/AISI1030 Steel Couples

Teknolojik Araştırmalar Dergisi, Makine Teknolojileri Elektronik Dergisi,, vol.8, no.3, pp.27-37, 2011 (Peer-Reviewed Journal)

Comparasion Of Grain Morfology In The Synergic Controlled Pulsed (GMAW-P) And Manual Gas Metal Arc (GMAW) Welding Of AISI 1030 Steel Couples Abstract

Teknolojik Araştırmalar Dergisi, Makine Teknolojileri Elektronik Dergisi, , vol.7, no.4, pp.39-45, 2010 (Peer-Reviewed Journal)

Influence 0f Heat Input On Microstructure Of the Synergic Controlled Pulsed (GMAW-P) And Manual Gas Metal Arc (GMAW) Welded AISI 430 Steel Couples

Teknolojik Araştırmalar Dergisi, Makine Teknolojileri Elektronik Dergisi , vol.7, no.2, pp.35-43, 2010 (Peer-Reviewed Journal)

Comparasion of Grain Morfology In The Synergic Controlled Pulsed (GMAW-P) And Manual Gas Metal Arc (GMAW) Welding of AISI 1030 Steel Couples

Teknolojik Araştırmalar Dergisi, Makine Teknolojileri Elektronik Dergisi, vol.7, no.4, pp.39-45, 2010 (Peer-Reviewed Journal)

AISI 430 Çelik Çiftinin Manuel (GMAW) ve Sinerjik Kontrollü (GMAW-P) Kaynağında Isı Girdisinin Mikroyapı Üzerindeki Etkisi

Teknolojik Araştırmalar Dergisi, Makine Teknolojileri Elektronik Dergisi , vol.7, no.2, pp.35-43, 2010 (Peer-Reviewed Journal)

Plasma Arc Welding of Hood Sheet Used in Automotive Industry

Selçuk Üniversitesi, Teknik Bilimler Meslek Yüksekokulu, Teknik Online Dergi, vol.9, no.1, pp.67-78, 2010 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

Effect of FeTi-FeB Additions on Wear Strength of 26.4 wt.% Cr Cast Iron

2nd International Conference on Engineering Technology and Applied Natural Sciences (ICEANS2022), Konya, Turkey, 15 - 18 October 2022, vol.1, pp.465-468

Investigation of Strength Properties of M7C3 Particulate Reinforced Epoxy Matrix Composites

2nd International Conference on Engineering Technology and Applied Natural Sciences (ICEANS2022), Konya, Turkey, 15 - 18 October 2022, vol.1, pp.601-604

Analysis of Face and Interface Properties of AISI 304 and DUROSTAT 500 Steel Joined by Double-Sided TIG Arc Welding

6th International Conference on Welding Technologies and Exhibition (ICWET’21), Hatay, Turkey, 13 - 15 October 2021, vol.1, pp.97-103

Study on Double Sided TIG Arc Welding of HARDOX 450 and Ferritic Stainless Steel,

6th International Conference on Welding Technologies and Exhibition (ICWET’21), Hatay, Turkey, 13 - 15 October 2021, vol.1, pp.97-103

Investigation on Continuous Drive Friction Welding of AISI 1040 Steel and High Chromium White Cast Iron Rods

6th International Conference on Welding Technologies and Exhibition (ICWET’21), Hatay, Turkey, 13 - 15 October 2021, vol.1, pp.104-110

Metallurgical Studies in Double Sided TIG Arc Welding of AISI 430 / HARDOX 450 Steel,

2nd Eurasian Conference on Science, Engineering and Technology (Eurasianscientech 2020), Gaziantep, Turkey, 7 - 09 October 2020, vol.1, pp.806-810

Effect of Cryogenic Treatment on the Structural Evolution of the As-Cast State of a HCrWCI,

2nd Eurasian Conference on Science, Engineering and Technology (Eurasianscientech 2020), Gaziantep, Turkey, 7 - 09 October 2020, vol.1, pp.381-385

Assessment of Weldability by Friction Welding Process of AISI1040 and High Chromium White Cast Iron

4. International Iron and SteelSymposium (UDCS’19), Karabük, Turkey, 4 - 06 April 2019, vol.1, pp.22-25

A composite surface layer produced with semi-centrifugal casting

4. International Iron Steel Symposium (UDCS’19), Karabük, Turkey, 4 - 06 April 2019, vol.1, pp.36-38

Friction Welding of High Chromium White Cast Iron and AISI1030 Steel Couple with Nickel Interlayer

4. International Iron Steel Symposium (UDCS’19), Karabük, Turkey, 4 - 06 April 2019, vol.1, pp.26-28

Influence of Additions of Titanium and Boron on the Structural Evolution of the As-Cast State of 27Cr High Chromium White Cast Iron

4. International Iron Steel Symposium (UDCS’19), Karabük, Turkey, 4 - 06 April 2019, vol.1, pp.33-35

Coating of Carburizing Steel with Pack Boronizing Method,

International Boron Symposium, BORON2019, Nevşehir, Turkey, 15 - 18 April 2019, vol.1, pp.326-329

Surface properties of FeCrC alloy coating produced by powder feeding GTA cladding on AISI1040 steel

5th International Conference on Welding Technologies and Exhibition (ICWET’18), Sarajevo, Bosnia And Herzegovina, 26 - 28 September 2018, vol.1, pp.178-186

Microstructural Properties of High Chromium White Cast Iron / AISI1030 Steel With Nickel Interlayer Welded by Friction Welding

5th International Conference on Welding Technologies and Exhibition (ICWET’18)26-28 September 2018, Sarajevo-Bosnia and Herzegovina, Sarajevo, Bosnia And Herzegovina, 26 - 28 September 2018, vol.1, pp.165-171

The Investigation of Microstructure of Binary Iron Niobium Alloy Coating by Pack Boronizing Method

5th International Conference on Welding Technologies and Exhibition (ICWET’18)26-28 September 2018, Sarajevo-Bosnia and Herzegovina, Sarajevo, Bosnia And Herzegovina, 26 - 28 September 2018, vol.1, pp.172-177

Metallographic Study of Hardox450FeW Based Composite Alloy Cladding on AISI 1020 Steel by PTA Welding Tecnique

The Internatinonal Conference on Materıals Science Mechanical and Automotıve Engıneerıngs and Technology in Çeşme/İzmir (Imsmatec’18) /İzmir/Çeşme, İzmir, Turkey, 10 - 12 April 2018, vol.1, pp.150-156

Dry Sliding Wear of As-Cast and Heat Treated TiBAL alloyed hypereutectic HCrWCI

9th International Conference on Advanced Materials (ROCAM2017) Symposium, Bucharest, Romania, 11 - 14 July 2017

Effect on the Boron Layer of The Increasing Niobium Amount in Pack Boronizing of Binary Iron-Niobium Alloys

THE 9th INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS, ROCAM 2017, Bükreş, Romania, 11 - 14 July 2017, vol.1, pp.72

Effects of Production Information System on Organisatinal Performance

6 th International Vocational Schools Symposium, Student-Centered Approaches in Vocational Education, Herzegovina, Bosnia And Herzegovina, 18 - 20 May 2017, vol.1, pp.199-206

Effect on The Formation of Boride Layer of Increasing Amount of Niobium in Pure Iron

3. International Iron Steel Symposium, Karabük, Turkey, 3 - 05 April 2017, vol.1, pp.318-320

The Tribological Properties of FeCrC Reinforced and Ni Based MMCs Fabricated Using The Mechanical Alloying Technique

16th International Materials Symposium IMSP’2016, Denizli, Turkey, 12 - 14 October 2016, vol.1, pp.1087-1095

Effect on Penetration Deep of Curent Intensity in TIG Keyhole Double Sided Arc Welding of AISI 1040 Steel Couple

16th International Materials Symposium IMSP’2016, Denizli, Turkey, 12 - 14 October 2016, vol.1, pp.199-204

Production of FeCrC Reinforced And Ni Based Metal Matrix Compositess Fabricated Using The Mechanical Alloying Technique

16th International Materials Symposium IMSP’2016, Denizli, Turkey, 12 - 14 October 2016, vol.1, pp.1081-1086

Effect on The Corneal Structure of The Metal Particles Scattered from Cutting and Grinding

International Science and Technology Conference ISTEC’xx16, Vienna, Austria, 13 - 15 July 2016, vol.1, pp.408-411

Effects of The Synergic Controlled Pulsed MIG P and Manual MIG Welding Processes on Microstructure And Hardness in Welding Of AISI 4140 Steel Couple

4th International Conference on Welding Technologies and Exhibition (ICWET’16), Gaziantep, Turkey, 11 - 13 May 2016, vol.2, pp.1172-1179

An Experimental Analysis of Rotational Speed inAISI1030 AISI420 Steel Couple Bonded by Friction Welding Method

4th International Conference on Welding Technologies and Exhibition (ICWET’16), Gaziantep, Turkey, 11 - 13 May 2016, vol.1, pp.52-57

Effect on the cornea structure of the ultraviolet emitted from the arc welding

3. International Symposium on Innovative Technologies in Engineering and Science ISITES 2015, Valencia, Spain, 3 - 05 June 2015, vol.1, pp.1561-1566

Electric Power Generation in the Solar Systems Comparisons of the Inorganic and Organic Solar Cells

3. International Symposium on Innovative Technologies in Engineering and Science ISITES 2015, Valencia, Spain, 3 - 05 June 2015, vol.1, pp.1740-1747

An Analysis Experimental for Archieving High-Quality Keyhole Shape in The Plasma Transferred Arc Welding of AISI 304/AISI 1030 Steel

2. International Iron Steel Symposium IISS’15, Karabük, Turkey, 1 - 03 April 2015, vol.1, pp.317-320

Effect of Mechanically Alloying on Direct Reduction of Iron from Steel Scale

2. International Iron Steel Symposium IISS’15, Karabük, Turkey, 1 - 03 April 2015, vol.1, pp.45-48

A quality evaluation of manuel (MIG) and Pulsed (P-MIG) welds of AISI304-AISI1040 steel couple

3nd International Conference on Welding Technologies and Exhition ICWET’xx14, Manisa, Turkey, 21 - 23 May 2014, vol.1, pp.509-519

The Effect of Mechanical Alloying on M7C3 Reinforced NiAl Composites

European Conference in Technology and Society, Eurotecs-2013, Sarajevo, Bosnia And Herzegovina, 27 - 28 June 2013, vol.1, pp.68-72

Hardness Changes of AISI 1020 Steel Surface Modiefied by HARDOX 450 and FeB Powder Mixture

European Conference in Technology and Society, Eurotecs-2013, Sarajevo, Bosnia And Herzegovina, 27 - 28 June 2013, vol.1, pp.62-67

Effect of FeB Reinforcements on Wear Behavior of AISI 1040 Steel Coated by Flame Spray and Ni20cr Alloy Powders

2. International Conference On Welding Technologies ICWET’12, Ankara, Turkey, 23 - 25 May 2012, vol.1, pp.479-484

Investigaton Microstruture of Alloyed FeCrC, FeW Mixed Powder on AISI 430 Stainless Steel by The Plasma Transferred Arc Weding

2. International Conference On Welding Technologies ICWET’12, Ankara, Turkey, 23 - 25 May 2012, vol.1, pp.274-284

Weldability Of Martensitic Stainless Steel To Medium Carbon Steel By Using Friction Welding

International Iron Steel Symposium IISS’12, Karabük, Turkey, 2 - 04 April 2012, vol.1, pp.826-831

Effect of FeCr Reinforcements on Wear Behavior of AISI 1040 Steel Coated by Flame Spray and Nİ20Cr Alloy Powders

International Iron Steel Symposium IISS’12, Karabük, Turkey, 2 - 04 April 2012, vol.1, pp.728-733

The Effect of Heat Treatment temperature on The Microstructure of G.G.G-60 Acicular Sphero Cast Iron

International Iron Steel Symposium IISS’12, Karabük, Turkey, 2 - 04 April 2012, vol.1, pp.544-550

Effect on Wear Behavior in Coated Surface by Thermal Spraying Processes and Ni-Al Alloy Of FeB Additioni

I. International Surface Treatment Symposium (ISTS’11), İstanbul, Turkey, 15 - 18 June 2011, vol.1, pp.1024-1030

Coating of FeCrC, FeTi, Powders on The Surface of AISI 430 Stainless Steel by Plasma Transferred Arc Welding Process

I. International Surface Treatment Symposium (ISTS’11, İstanbul, Turkey, 15 - 18 June 2011, vol.1, pp.1138-1144

Microstructural Characteristic of Stellite 6 Reinforced Coatings on AISI 1010 Steel by Plasma Transferred Arc Weld

I. International Surface Treatment Symposium (ISTS), İstanbul, Turkey, 15 - 18 June 2011, vol.1, pp.1173-1182

Surface Coating of X120Mn12 Steel by Using CoNiCrMo FeCrNi NiCr and FeNiAlMo Powders and PTA Process

I. International Surface Treatment Symposium (ISTS’11), İstanbul, Turkey, 15 - 18 June 2011, vol.1, pp.1145-1154

Effect on Mechanical Properties of Current Input in The Joining by Keyhole Plasma Welding of AISI 430/AISI 1040 Steel Couples

6. International Advenced Technologies Symposium (IATS’11), Elazığ, Turkey, 16 - 18 May 2011, vol.1, pp.253-258

Investigation of Microstructure Characteristic of AISI 1040/AISI 430 Steel Couple Welded by Keyhole Plasma Arc Welding Technique

6. International Advenced Technologies Symposium (IATS’11), Elazığ, Turkey, 16 - 19 May 2011, vol.1, pp.229-234

The Effect of Traverse Speed on The Mechanical Properties of Keyhole Plasma Arc Welded AISI 430/AISI 1040 Steel

1. International Conference On Welding Technologies ICWET’09, Ankara, Turkey, 11 - 13 June 2009, vol.1, pp.548-559

Books & Book Chapters

Çelik Standartları

in: Materials Technology, Prof. Dr. fehim FINDIK,Dr. Öğr. Ü. Turhan KURŞUN, Editor, Lisans Yayıncılık, İstanbul, pp.199-214, 2010