Prof. Dr. TANJU TEKER

MATERIALS TESTING , cilt.63, sa.11, ss.1012-1017, 2021 (SCI-Expanded, Scopus)

37. Metallurgical and Mechanical Characteristics of Friction Welded Joint of 27 wt.%CrWCI/AISI 1040 Steel

Teker T., Ozaslan M.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , cilt.74, sa.11, ss.2739-2749, 2021 (SCI-Expanded)

38. Heat affected zone and weld metal analysis of HARDOX 450 and ferritic stainless steel double sided TIG-joints

TEKER T., Gencdogan D.

MATERIALS TESTING , cilt.63, sa.10, ss.923-928, 2021 (SCI-Expanded, Scopus)

39. Effect of rotary friction welding on mechanical properties of 6060 Al alloy

TEKER T., Soysal T., Akgun G.

REVISTA DE METALURGIA , cilt.57, sa.4, 2021 (SCI-Expanded, Scopus)

40. Katı Atık Kullanımına Estetik Bir Çözüm Önerisi: Adıyaman İlindeki Mermer Atıklarından Antik Mozaik Üretimi

Tanrıverdi Y., Akça E., Ezer S., Dolaş O., Ak H., Teker T.

Avrupa Bilim ve Teknoloji Dergisi , cilt.27, ss.407-411, 2021 (Hakemli Dergi) Sürdürülebilir Kalkınma

41. Investigation of deformation and element diffusion in joint interface of mild carbon steel and HCrWCI welded by friction welding

Teker T., Özaslan M.

Cumhuriyet Science Journal , cilt.42, sa.2, ss.502-507, 2021 (Hakemli Dergi)

42. Characterization of mechanically alloyed Fe based and MoNiAl+Al2O3 reinforced composites

YILMAZ S., Teker T., Eker H.

MATERIALS TESTING , cilt.63, sa.4, ss.368-372, 2021 (SCI-Expanded)

43. Investigation on mechanical properties of solution strengthened and austempered ferritic ductile irons

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.111, sa.12, ss.976-982, 2020 (SCI-Expanded)

44. Phase and chemical structure characterization in double sided TIG arc welding of HARDOX 450 and AISI 430 steel

Teker T., Gençdoğan D.

Cumhuriyet Science Journal , cilt.41, sa.4, ss.987-994, 2020 (Hakemli Dergi)

45. Metallurgical characterization of mechanically alloyed MoNiAl-WC reinforced Fe matrix composite

Teker T., Yilmaz S. O.

MATERIALS TESTING , cilt.62, sa.12, ss.1199-1204, 2020 (SCI-Expanded)

46. Synthesis and structural characterization of Fe based Ti+Ni3Al+Al2O3 reinforcement composite produced by mechanical alloying

Teker T., Yilmaz S. O.

REVISTA DE METALURGIA , cilt.56, sa.4, 2020 (SCI-Expanded, Scopus)

47. Investigation of the weldability of AISI304 and AISI1030 steels welded by friction welding

Teker T., Karakurt E. M., Ozabaci M., Güleryüz Y.

METALLURGICAL RESEARCH & TECHNOLOGY , cilt.117, sa.6, 2020 (SCI-Expanded, Scopus)

48. Effect of carbides on the wear resistance of white cast iron alloyed with 12.7 wt.-% Cr and nickel

MATERIALS TESTING , cilt.62, sa.8, ss.788-792, 2020 (SCI-Expanded, Scopus)

49. Türkiye’de Kaynakçılık Mesleğinde Meydana Gelen İş Kazalari ve Güvenlik Önlemleri

Teker T., Gençdoğan D.

Adıyaman Üniversitesi, Mühendislik Bilimleri Dergisi , cilt.7, sa.12, ss.34-44, 2020 (Hakemli Dergi)

50. Effect of Alloy Content in Hardox450+FeW Composites Alloyed by PTAW on Wear Characteristic

PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES , cilt.56, sa.3, ss.584-590, 2020 (SCI-Expanded, Scopus)

51. Examination of mechanical properties of high chromium white cast iron/AISI1030 steel welded by friction welding with nickel interlayer

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING , cilt.25, sa.2, ss.150-156, 2020 (SCI-Expanded, Scopus)

52. YKBDD / Orta Karbonlu Çelik Çiftinin Nikel Ara Tabaka Kullanarak Sürtünme Kaynak Yöntemiyle Birleştirilmesi

Adıyaman Üniversitesi, Mühendislik Bilimleri Dergisi , cilt.6, sa.11, ss.86-94, 2019 (TRDizin)

53. Characterization of the boron layer formed by pack boronizing of binary iron-niobium alloys

MATERIALS TESTING , cilt.61, sa.9, ss.875-879, 2019 (SCI-Expanded)

54. Effect of TiBAl inoculation on abrasive wear resistance of high Cr white cast iron

Teker T., Yilmaz S. O., Kerkut E.

MATERIALS TESTING , cilt.61, sa.7, ss.690-694, 2019 (SCI-Expanded, Scopus)

55. Effect of heat treatment on the wear behavior of GX200Cr13Ni6WMoMn

Teker T., Dalmis I. S., Yilmaz R.

MATERIALS TESTING , cilt.61, sa.5, ss.441-447, 2019 (SCI-Expanded, Scopus)

56. Properties and chemical composition of plasma arc welded Hardox450+FeW coatings

Teker T., Topal A.

MATERIALS TESTING , cilt.61, sa.1, ss.35-40, 2019 (SCI-Expanded, Scopus)

57. Effect of Melt-In and Key-Hole Modes on the Structure and Mechanical Properties of AISI 430 Steel Welded Using Plasma Transfer Arc Welding

Teker T., Yilmaz S. O., Karakurt E. M.

PHYSICS OF METALS AND METALLOGRAPHY , cilt.119, sa.7, ss.669-677, 2018 (SCI-Expanded)

58. Weld quality and productivity of AISI 4140 steel welded by unpulsed and pulsed GMAW

KURŞUN T., Teker T.

MATERIALS TESTING , cilt.60, sa.2, ss.149-155, 2018 (SCI-Expanded, Scopus)

59. Effect of different rotational speeds on mechanical and metallurgical properties of friction welded dissimilar steels

MATERIALS TESTING , cilt.60, sa.2, ss.135-141, 2018 (SCI-Expanded)

60. Wear behavior of GTA coated FeCrC based bond alloy on an AISI 1040 steel substrate

Dalmis S., Teker T., Yilmaz S. O.

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.56, sa.5, ss.339-348, 2018 (SCI-Expanded)

61. Sliding wear behavior of FeCrC reinforced and Ni-based composites produced by mechanical alloying technique

Yilmaz S. O., Demir F., Teker T.

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.56, sa.1, ss.65-74, 2018 (SCI-Expanded, Scopus)

62. Mechanical property effects of symmetrical hour glass shapes formed during double-sided TIG keyhole arc welding of AISI1040 joints

Teker T., Karakurt E. M., Demir F.

MATERIALS TESTING , cilt.59, sa.6, ss.524-529, 2017 (SCI-Expanded)

63. Demir-Niyobyum İkili Alaşımların Kutu Borlamasında Artan İşlem Sıcaklığının Borür Tabakasının Oluşumu Üzerindeki Etkisi

Adıyaman Üniversitesi, Mühendislik Bilimleri Dergisi , cilt.4, sa.6, ss.13-19, 2017 (Hakemli Dergi)

64. Effect of the manual (GMAW) and pulsed (P-GMAW) welding processes on impact strength and fracture behavior of AISI 304-AISI 1040 dissimilar steel joints fabricated by ASP316L austenitic stainless steel filler metal

Teker T., KURŞUN T.

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.55, sa.2, ss.141-148, 2017 (SCI-Expanded)

65. Applications of Corneal Foreign Body Patients and Safety Eyewear Usage Rates

Şimşek A., Teker T., Karakurt E. M., Yalçın A.

Adıyaman Üniversitesi Sağlık Bilimleri Dergisi , cilt.2, sa.2, ss.265-271, 2016 (Hakemli Dergi)

66. Effect of TiBAl inoculation and heat treatment on microstructure and mechanical properties of hypereutectic high chromium white cast iron

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.672, ss.324-331, 2016 (SCI-Expanded, Scopus)

67. Effect of mechanical alloying on FeCrC reinforced Ni alloys

Yilmaz S. O., Teker T., Demir F.

MATERIALS TESTING , cilt.58, sa.4, ss.337-342, 2016 (SCI-Expanded)

68. Wear behavior of iron boride coating on AISI 4140

Yilmaz S. O., Teker T., Karatas S.

PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES , cilt.52, sa.1, ss.119-127, 2016 (SCI-Expanded, Scopus)

69. Effect on the Cornea Structure of the Ultraviolet Emitted from the Arc Welding

Şimşek A., Teker T., Karakurt E. M., Yalçın A.

Adıyaman Üniversitesi Sağlık Bilimleri Dergisi , cilt.2, sa.1, ss.187-196, 2016 (Hakemli Dergi)

70. Experimental research on mechanism and process of direct iron making reduction of mechanically milling scale with coal

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.650, ss.741-747, 2015 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

71. Weldability of AA6063 alloys by using Keyhole Gas Tungsten Arc Welding technique

Teker T., KURŞUN T.

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.52, sa.4, ss.237-242, 2014 (SCI-Expanded)

72. MICROSTRUCTURE AND WEAR PROPERTIES OF FeCrC, FeW AND FeTi MODIFIED IRON BASED ALLOY COATING DEPOSITED BY PTA PROCESS ON AISI 430 STEEL

Teker T., Karatas S., Yilmaz S. O.

ARCHIVES OF METALLURGY AND MATERIALS , cilt.59, sa.3, ss.925-933, 2014 (SCI-Expanded)

73. The effect of austenitic interlayer on microstructure and mechanical behaviors in keyhole plasma transfer arc welding of ferritic stainless steel couple

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.69, ss.1833-1840, 2013 (SCI-Expanded)

74. CoNiCrMo, FeCrNi, NiCr and FeNiAlMo modified iron based alloy coating deposited by plasma transferred arc process

JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS , cilt.15, ss.1010-1019, 2013 (SCI-Expanded)

75. Evaluation of the metallurgical and mechanical properties of friction-welded joints of dissimilar metal combinations AISI2205/Cu

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.66, ss.303-310, 2013 (SCI-Expanded, Scopus)

76. The coating of FeB, FeTi, FeW powders on AISI 430 stainless steel by PTA

Teker T., Karatas S., Yilmaz S. O.

JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS , cilt.15, ss.284-293, 2013 (SCI-Expanded)

77. EFFECT OF SYNERGIC CONTROLLED PULSED AND MANUAL GAS METAL ARC WELDING PROCESSES ON MECHANICAL AND METALLURGICAL PROPERTIES OF AISI 430 FERRITIC STAINLESS STEEL

ARCHIVES OF METALLURGY AND MATERIALS , cilt.58, sa.4, ss.1029-1035, 2013 (SCI-Expanded)

78. The effect of nozzle orifice diameter on penetration depth and mechanical properties of AISI 430/AISI 1040 dissimilar steel joined by keyhole PTA welding process

Teker T., Ozdemir N.

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.51, sa.4, ss.241-249, 2013 (SCI-Expanded)

79. The role of TiB2, Fe2B reinforcements on the wear rate of the coated AISI 430 stainless steel surface by PTA

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.51, sa.6, ss.373-381, 2013 (SCI-Expanded)

80. Weldability and joining characteristics of AISI 430/AISI 1040 steels using keyhole plasma arc welding

Teker T., Ozdemir N.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.63, ss.117-128, 2012 (SCI-Expanded, Scopus)

81. AISI 1040 Çelik Çiftinin KPTA Kaynağında Plazma Gaz Debisinin Nüfuziyet Üzerine Etkisi

Teker T., Özdemir N.

Selçuk Üniversitesi, Teknik Bilimler Meslek Yüksekokulu, Teknik Online Derg , cilt.11, sa.1, ss.48-59, 2012 (Hakemli Dergi)

82. AISI 430/AISI 1030 Çelik Çiftinin Manuel (MIG) ve Sinerjik Kontrollü darbeli (MIG-P) Kaynağının Mikroyapı ve Sertlik Üzerine Etkisi

Teker T., Kurşun T.

Teknolojik Araştırmalar Dergisi, Makine Teknolojileri Elektronik Dergisi, , cilt.8, sa.3, ss.27-37, 2011 (Hakemli Dergi)

83. Effects of Co and Cr particles additions on phase transformation temperature of a Pb-Sn based alloy

Teker T., Kaplan M.

JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS , cilt.13, ss.422-424, 2011 (SCI-Expanded)

84. Weldability of AISI 430/AISI 1030 Steel Couples via the Synergic Controlled Pulsed (GMAW-P) and Manual Gas Metal Arc (GMAW) Welding Techniques

Teker T., KURŞUN T.

MATERIALS AND MANUFACTURING PROCESSES , cilt.26, sa.7, ss.926-932, 2011 (SCI-Expanded, Scopus)

85. Study to evaluate the abrasive wear resistant behavior of materials coated with Fe-Cr-Si-C

Yaz M., Yilmaz S. O., Teker T.

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.49, sa.4, ss.297-306, 2011 (SCI-Expanded)

86. AISI 1030 Çelik Çiftinin Manuel (GMAW) ve Sinerjik Kontrollü (GMAW-P) Kaynağında Tane Morfolojisinin Karşılaştırılması

Teker T., Kurşun T.

Teknolojik Araştırmalar Dergisi, Makine Teknolojileri Elektronik Dergisi, , cilt.7, sa.4, ss.39-45, 2010 (Hakemli Dergi)

87. AISI 430 Çelik Çiftinin Manuel (GMAW) ve Sinerjik Kontrollü (GMAW-P) Kaynağında Isı Girdisinin Mikroyapı Üzerindeki Etkisi

Teker T., Kurşun T.

Teknolojik Araştırmalar Dergisi, Makine Teknolojileri Elektronik Dergisi , cilt.7, sa.2, ss.35-43, 2010 (Hakemli Dergi)

88. Otomotiv Endüstrisinde Kullanılan Kaporta Sacının Plazma Ark Kaynağı

Selçuk Üniversitesi, Teknik Bilimler Meslek Yüksekokulu, Teknik Online Dergi , cilt.9, sa.1, ss.67-78, 2010 (Hakemli Dergi)

89. The effects of Co and Cr particles additions on microstructure and wear behaviour of Pb-Sn based alloy

Teker T., Kaplan M.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.484, ss.510-513, 2009 (SCI-Expanded)

90. Co/Cr Partikül Katkılı Pb-Sn-Cu Alaşımının Mikroyapı ve Mekanik Özelliklerinin Araştırılması

Teker T., Kaplan M.

Makina Mühendisleri Odası , cilt.46, sa.549, ss.12-19, 2005 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 60

1. Failure Analysis of Construction Steels Manufactured from Recycled Materials

Çebi Ş., Yılmaz S. O., Teker T.

Universal International Congress of Modern Scientific Research, London, İngiltere, 5 - 07 Şubat 2026, ss.1-6, (Tam Metin Bildiri)

2. Izod Impact Performance of Construction Steels Produced from Scrap

Çebi Ş., Yılmaz S. O., Teker T.

Universal International Congress of Modern Scientific Research, London, İngiltere, 5 - 07 Şubat 2026, ss.7-12, (Tam Metin Bildiri)

3. Microstructure and Features of 316L Stainless Steels Joined by Laser Welding

Saral Y., Yılmaz S. O., Teker T., Dalmış İ. S.

5th International Turkish World Enginering and Science Congress, Antalya, Türkiye, 4 - 07 Aralık 2025, cilt.2, ss.241-247, (Tam Metin Bildiri)

4. Impact Failure Analysis of Friction Welded Square Section HARDOX 450/AISI 430 joints

Tekin O., Teker T.

7. International Mediterranean Scientific Research Congress, Valencia, İspanya, 9 - 11 Ocak 2025, ss.453-458, (Tam Metin Bildiri)

5. An Experimental Analysis of the Weld Metal in Friction Welded Dissimilar Steel Joints

Teker T., Tekin O.

7. International Mediterranean Scientific Research Congress, Valencia, İspanya, 9 - 11 Ocak 2025, ss.459-464, (Tam Metin Bildiri)

6. Metalurgical Analysis of FeTi–B4C Reinforced Fe Based Composites Fabricated by Mechanical Alloying

Teker T., Yılmaz S. O.

6. International Mediterranean Scientific Research Congress, Rome, İtalya, 13 - 15 Ağustos 2024, cilt.2, ss.848-853, (Tam Metin Bildiri)

7. Structural Evoluation of B4C–FeTi Ceramic Composite

Yılmaz S. O., Teker T.

6. International Mediterranean Scientific Research Congress, Rome, İtalya, 13 - 15 Ağustos 2024, cilt.2, ss.854-858, (Tam Metin Bildiri)

8. Frictional Properties of Cr7C3 Reinforced Polymer Matrix Composites

Yılmaz S. O., Teker T., Kavak S.

4. International Trakya Scientific Research and Innovation Congress (ISARC’24), Edirne, Türkiye, 20 - 21 Temmuz 2024, cilt.1, ss.12, (Özet Bildiri)

9. Effect of Cr7C3 Filler Percentage on Comprehensive Performance of an Epoxy Resin

Teker T., Yılmaz S. O., Kavak S.

4. International Trakya Scientific Research and Innovation Congress (ISARC’24), Edirne, Türkiye, 20 - 21 Temmuz 2024, cilt.1, ss.13, (Özet Bildiri)

10. Examination of Joint Properties of Double-Sided TIG Welded of Dissimilar Steels

TEKER T., AYDIN S.

3rd Global Conference on Engineering Research (GLOBCER’23), Bandırma, Türkiye, 13 - 16 Eylül 2023, cilt.1, ss.460-465, (Tam Metin Bildiri)

11. Impact Toughness of TIG Double-Sided Arc Welded Thick Dissimilar Plates

TEKER T., GÜNEŞ A.

1st International Conference on Modern and Advanced Research (ICMAR 2023), Konya, Türkiye, 29 - 31 Temmuz 2023, cilt.1, ss.206-209, (Tam Metin Bildiri)

12. Evaluation of the Wear Characteristics of Different Cold Tool Steels

YILMAZ S. O., TEKER T., DALMIŞ İ. S., ERİŞEN A.

1st International Conference on Modern and Advanced Research (ICMAR 2023), Konya, Türkiye, 27 - 31 Temmuz 2023, cilt.1, ss.217-220, (Tam Metin Bildiri)

13. Investigation of Strength Properties of M7C3 Particulate Reinforced Epoxy Matrix Composites

YILMAZ S. O., TEKER T., KAVAK S., BAYRAM B. E.

2nd International Conference on Engineering Technology and Applied Natural Sciences (ICEANS2022), Konya, Türkiye, 15 - 18 Ekim 2022, cilt.1, ss.601-604, (Tam Metin Bildiri)

14. Effect of FeTi-FeB Additions on Wear Strength of 26.4 wt.% Cr Cast Iron

TEKER T., YILMAZ S. O.

2nd International Conference on Engineering Technology and Applied Natural Sciences (ICEANS2022), Konya, Türkiye, 15 - 18 Ekim 2022, cilt.1, ss.465-468, (Tam Metin Bildiri)

15. Study on Double Sided TIG Arc Welding of HARDOX 450 and Ferritic Stainless Steel,

TEKER T., GENÇDOĞAN D.

6th International Conference on Welding Technologies and Exhibition (ICWET’21), Hatay, Türkiye, 13 - 15 Ekim 2021, cilt.1, ss.97-103, (Tam Metin Bildiri)

16. Analysis of Face and Interface Properties of AISI 304 and DUROSTAT 500 Steel Joined by Double-Sided TIG Arc Welding

TEKER T., GÜNEŞ A.

6th International Conference on Welding Technologies and Exhibition (ICWET’21), Hatay, Türkiye, 13 - 15 Ekim 2021, cilt.1, ss.97-103, (Tam Metin Bildiri)

17. Investigation on Continuous Drive Friction Welding of AISI 1040 Steel and High Chromium White Cast Iron Rods

TEKER T., ÖZASLAN M., YILMAZ S. O.

6th International Conference on Welding Technologies and Exhibition (ICWET’21), Hatay, Türkiye, 13 - 15 Ekim 2021, cilt.1, ss.104-110, (Tam Metin Bildiri)

18. Metallurgical Studies in Double Sided TIG Arc Welding of AISI 430 / HARDOX 450 Steel,

TEKER T., GENÇDOĞAN D.

2nd Eurasian Conference on Science, Engineering and Technology (Eurasianscientech 2020), Gaziantep, Türkiye, 7 - 09 Ekim 2020, cilt.1, ss.806-810, (Tam Metin Bildiri)

19. Effect of Cryogenic Treatment on the Structural Evolution of the As-Cast State of a HCrWCI,

2nd Eurasian Conference on Science, Engineering and Technology (Eurasianscientech 2020), Gaziantep, Türkiye, 7 - 09 Ekim 2020, cilt.1, ss.381-385, (Tam Metin Bildiri)

20. Friction Welding of High Chromium White Cast Iron and AISI1030 Steel Couple with Nickel Interlayer

4. International Iron Steel Symposium (UDCS’19), Karabük, Türkiye, 4 - 06 Nisan 2019, cilt.1, ss.26-28, (Tam Metin Bildiri)

21. A composite surface layer produced with semi-centrifugal casting

4. International Iron Steel Symposium (UDCS’19), Karabük, Türkiye, 4 - 06 Nisan 2019, cilt.1, ss.36-38

22. Influence of Additions of Titanium and Boron on the Structural Evolution of the As-Cast State of 27Cr High Chromium White Cast Iron

TEKER T., KARAKURT E. M., ÖZASLAN M.

4. International Iron Steel Symposium (UDCS’19), Karabük, Türkiye, 4 - 06 Nisan 2019, cilt.1, ss.33-35, (Tam Metin Bildiri)

23. Assessment of Weldability by Friction Welding Process of AISI1040 and High Chromium White Cast Iron

4. International Iron and SteelSymposium (UDCS’19), Karabük, Türkiye, 4 - 06 Nisan 2019, cilt.1, ss.22-25, (Tam Metin Bildiri)

24. Coating of Carburizing Steel with Pack Boronizing Method,

TEKER T., SARI M., KARAKURT E. M.

International Boron Symposium, BORON2019, Nevşehir, Türkiye, 15 - 18 Nisan 2019, cilt.1, ss.326-329, (Tam Metin Bildiri)

25. Surface properties of FeCrC alloy coating produced by powder feeding GTA cladding on AISI1040 steel

YILMAZ S. O., TEKER T., DALMIŞ İ. S.

5th International Conference on Welding Technologies and Exhibition (ICWET’18), Sarajevo, Bosna-Hersek, 26 - 28 Eylül 2018, cilt.1, ss.178-186, (Tam Metin Bildiri)

26. The Investigation of Microstructure of Binary Iron Niobium Alloy Coating by Pack Boronizing Method

5th International Conference on Welding Technologies and Exhibition (ICWET’18)26-28 September 2018, Sarajevo-Bosnia and Herzegovina, Sarajevo, Bosna-Hersek, 26 - 28 Eylül 2018, cilt.1, ss.172-177, (Tam Metin Bildiri)

27. Microstructural Properties of High Chromium White Cast Iron / AISI1030 Steel With Nickel Interlayer Welded by Friction Welding

5th International Conference on Welding Technologies and Exhibition (ICWET’18)26-28 September 2018, Sarajevo-Bosnia and Herzegovina, Sarajevo, Bosna-Hersek, 26 - 28 Eylül 2018, cilt.1, ss.165-171

28. Metallographic Study of Hardox450FeW Based Composite Alloy Cladding on AISI 1020 Steel by PTA Welding Tecnique

The Internatinonal Conference on Materıals Science Mechanical and Automotıve Engıneerıngs and Technology in Çeşme/İzmir (Imsmatec’18) /İzmir/Çeşme, İzmir, Türkiye, 10 - 12 Nisan 2018, cilt.1, ss.150-156, (Tam Metin Bildiri)

29. Dry Sliding Wear of As-Cast and Heat Treated TiBAL alloyed hypereutectic HCrWCI

YILMAZ S. O., TEKER T., KARATAŞ S.

9th International Conference on Advanced Materials (ROCAM2017) Symposium, Bucharest, Romanya, 11 - 14 Temmuz 2017

30. Effect on the Boron Layer of The Increasing Niobium Amount in Pack Boronizing of Binary Iron-Niobium Alloys

THE 9th INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS, ROCAM 2017, Bükreş, Romanya, 11 - 14 Temmuz 2017, cilt.1, ss.72, (Özet Bildiri)

31. Effects of Production Information System on Organisatinal Performance

TEKER T., DULKADİR B.

6 th International Vocational Schools Symposium, Student-Centered Approaches in Vocational Education, Herzegovina, Bosna-Hersek, 18 - 20 Mayıs 2017, cilt.1, ss.199-206, (Tam Metin Bildiri)

32. Relation Between Microstructure and Hardness in HARDOX 450FeW Based Composite Coating Fabricated By Plasma Transferred Arc Cladding

TEKER T., YILMAZ S. O., KARAKURT E. M.

3. International Iron Steel Symposium, Karabük, Türkiye, 3 - 05 Nisan 2017, cilt.1, ss.321-325

33. Effect on The Formation of Boride Layer of Increasing Amount of Niobium in Pure Iron

3. International Iron Steel Symposium, Karabük, Türkiye, 3 - 05 Nisan 2017, cilt.1, ss.318-320, (Tam Metin Bildiri)

34. Production of FeCrC Reinforced And Ni Based Metal Matrix Compositess Fabricated Using The Mechanical Alloying Technique

YILMAZ S. O., DEMİR F., TEKER T.

16th International Materials Symposium IMSP’2016, Denizli, Türkiye, 12 - 14 Ekim 2016, cilt.1, ss.1081-1086

35. Effect on Penetration Deep of Curent Intensity in TIG Keyhole Double Sided Arc Welding of AISI 1040 Steel Couple

TEKER T., KARAKURT E. M., YILMAZ S. O.

16th International Materials Symposium IMSP’2016, Denizli, Türkiye, 12 - 14 Ekim 2016, cilt.1, ss.199-204, (Tam Metin Bildiri)

36. The Tribological Properties of FeCrC Reinforced and Ni Based MMCs Fabricated Using The Mechanical Alloying Technique

YILMAZ S. O., TEKER T., DEMİR F.

16th International Materials Symposium IMSP’2016, Denizli, Türkiye, 12 - 14 Ekim 2016, cilt.1, ss.1087-1095, (Tam Metin Bildiri)

37. Effect on The Corneal Structure of The Metal Particles Scattered from Cutting and Grinding

ŞİMŞEK A., TEKER T., KARAKURT E. M.

International Science and Technology Conference ISTEC’xx16, Vienna, Avusturya, 13 - 15 Temmuz 2016, cilt.1, ss.408-411, (Tam Metin Bildiri)

38. Effects of The Synergic Controlled Pulsed MIG P and Manual MIG Welding Processes on Microstructure And Hardness in Welding Of AISI 4140 Steel Couple

TEKER T., KURŞUN T.

4th International Conference on Welding Technologies and Exhibition (ICWET’16), Gaziantep, Türkiye, 11 - 13 Mayıs 2016, cilt.2, ss.1172-1179, (Tam Metin Bildiri)

39. An Experimental Analysis of Rotational Speed inAISI1030 AISI420 Steel Couple Bonded by Friction Welding Method

ŞİMŞEK A., TEKER T., KARAKURT E. M.

4th International Conference on Welding Technologies and Exhibition (ICWET’16), Gaziantep, Türkiye, 11 - 13 Mayıs 2016, cilt.1, ss.52-57, (Tam Metin Bildiri)

40. Effect on the cornea structure of the ultraviolet emitted from the arc welding

3. International Symposium on Innovative Technologies in Engineering and Science ISITES 2015, Valencia, İspanya, 3 - 05 Haziran 2015, cilt.1, ss.1561-1566, (Tam Metin Bildiri)

41. Electric Power Generation in the Solar Systems Comparisons of the Inorganic and Organic Solar Cells

TEKER T., VARINCA K. B., KARAKURT E. M., AYLAZ G.

3. International Symposium on Innovative Technologies in Engineering and Science ISITES 2015, Valencia, İspanya, 3 - 05 Haziran 2015, cilt.1, ss.1740-1747, (Tam Metin Bildiri)

42. An Analysis Experimental for Archieving High-Quality Keyhole Shape in The Plasma Transferred Arc Welding of AISI 304/AISI 1030 Steel

TEKER T.

2. International Iron Steel Symposium IISS’15, Karabük, Türkiye, 1 - 03 Nisan 2015, cilt.1, ss.317-320, (Tam Metin Bildiri)

43. Effect of Mechanically Alloying on Direct Reduction of Iron from Steel Scale

2. International Iron Steel Symposium IISS’15, Karabük, Türkiye, 1 - 03 Nisan 2015, cilt.1, ss.45-48, (Tam Metin Bildiri)

44. A quality evaluation of manuel (MIG) and Pulsed (P-MIG) welds of AISI304-AISI1040 steel couple

TEKER T., KURŞUN T.

3nd International Conference on Welding Technologies and Exhition ICWET’xx14, Manisa, Türkiye, 21 - 23 Mayıs 2014, cilt.1, ss.509-519, (Tam Metin Bildiri)

45. The Effect of Mechanical Alloying on M7C3 Reinforced NiAl Composites

YILMAZ S. O., DEMİR F., KARATAŞ S., TEKER T.

European Conference in Technology and Society, Eurotecs-2013, Sarajevo, Bosna-Hersek, 27 - 28 Haziran 2013, cilt.1, ss.68-72

46. Hardness Changes of AISI 1020 Steel Surface Modiefied by HARDOX 450 and FeB Powder Mixture

European Conference in Technology and Society, Eurotecs-2013, Sarajevo, Bosna-Hersek, 27 - 28 Haziran 2013, cilt.1, ss.62-67

47. Investigation Microstructure of Alloyed FeCrC, FeTi and FeW Mixed Powder on AISI 430 Stainless Steel by The Plasma Transferred Arc Welding

14th International Materials Symposium IMSP’2012, Denizli, Türkiye, 10 - 12 Ekim 2012, cilt.1, ss.982-990, (Tam Metin Bildiri)

48. Effect of FeB Reinforcements on Wear Behavior of AISI 1040 Steel Coated by Flame Spray and Ni20cr Alloy Powders

KARATAŞ S., TEKER T., YILMAZ S. O.

2. International Conference On Welding Technologies ICWET’12, Ankara, Türkiye, 23 - 25 Mayıs 2012, cilt.1, ss.479-484, (Tam Metin Bildiri)

49. Investigaton Microstruture of Alloyed FeCrC, FeW Mixed Powder on AISI 430 Stainless Steel by The Plasma Transferred Arc Weding

2. International Conference On Welding Technologies ICWET’12, Ankara, Türkiye, 23 - 25 Mayıs 2012, cilt.1, ss.274-284, (Tam Metin Bildiri)

50. Effect of FeCr Reinforcements on Wear Behavior of AISI 1040 Steel Coated by Flame Spray and Nİ20Cr Alloy Powders

International Iron Steel Symposium IISS’12, Karabük, Türkiye, 2 - 04 Nisan 2012, cilt.1, ss.728-733, (Tam Metin Bildiri)

51. The Effect of Heat Treatment temperature on The Microstructure of G.G.G-60 Acicular Sphero Cast Iron

KARATAŞ S., TEKER T., YILMAZ S. O.

International Iron Steel Symposium IISS’12, Karabük, Türkiye, 2 - 04 Nisan 2012, cilt.1, ss.544-550, (Tam Metin Bildiri)

52. The effect of Current Intensity on Penetration Deep of AISI 430/ AISI 1040 Steel Couple Welded by Keyhole Plasma Transfer Arc Welding Process

International Iron Steel Symposium IISS’12, Karabük, Türkiye, 2 - 04 Nisan 2012, cilt.1, ss.762-768, (Tam Metin Bildiri)

53. Weldability Of Martensitic Stainless Steel To Medium Carbon Steel By Using Friction Welding

KIRIK İ., ÖZDEMİR N., TEKER T.

International Iron Steel Symposium IISS’12, Karabük, Türkiye, 2 - 04 Nisan 2012, cilt.1, ss.826-831, (Tam Metin Bildiri)

54. Surface Coating of X120Mn12 Steel by Using CoNiCrMo FeCrNi NiCr and FeNiAlMo Powders and PTA Process

YILMAZ S. O., KARATAŞ S., TEKER T.

I. International Surface Treatment Symposium (ISTS’11), İstanbul, Türkiye, 15 - 18 Haziran 2011, cilt.1, ss.1145-1154

55. Coating of FeCrC, FeTi, Powders on The Surface of AISI 430 Stainless Steel by Plasma Transferred Arc Welding Process

TEKER T., YILMAZ S. O., KARATAŞ S.

I. International Surface Treatment Symposium (ISTS’11, İstanbul, Türkiye, 15 - 18 Haziran 2011, cilt.1, ss.1138-1144

56. Microstructural Characteristic of Stellite 6 Reinforced Coatings on AISI 1010 Steel by Plasma Transferred Arc Weld

YAZ M., TEKER T., KARATAŞ S.

I. International Surface Treatment Symposium (ISTS), İstanbul, Türkiye, 15 - 18 Haziran 2011, cilt.1, ss.1173-1182

57. Effect on Wear Behavior in Coated Surface by Thermal Spraying Processes and Ni-Al Alloy Of FeB Additioni

KARATAŞ S., TEKER T., YILMAZ S. O.

I. International Surface Treatment Symposium (ISTS’11), İstanbul, Türkiye, 15 - 18 Haziran 2011, cilt.1, ss.1024-1030

58. Effect on Mechanical Properties of Current Input in The Joining by Keyhole Plasma Welding of AISI 430/AISI 1040 Steel Couples

6. International Advenced Technologies Symposium (IATS’11), Elazığ, Türkiye, 16 - 18 Mayıs 2011, cilt.1, ss.253-258, (Tam Metin Bildiri)

59. Investigation of Microstructure Characteristic of AISI 1040/AISI 430 Steel Couple Welded by Keyhole Plasma Arc Welding Technique

6. International Advenced Technologies Symposium (IATS’11), Elazığ, Türkiye, 16 - 19 Mayıs 2011, cilt.1, ss.229-234, (Tam Metin Bildiri)

60. The Effect of Traverse Speed on The Mechanical Properties of Keyhole Plasma Arc Welded AISI 430/AISI 1040 Steel