Publications & Works

Publication Network
Articles 43
All (43)
SCI-E, SSCI, AHCI (33)
SCI-E, SSCI, AHCI, ESCI (33)
Scopus (34)
TRDizin (7)
Other Publications (3)

1. Phase-dependent catalytic performance of sol-gel synthesized ZrO2 in supercritical water gasification of formaldehyde

Ateş A., Mert O., Öksüz K. E.
International Journal of Hydrogen Energy , vol.177, 2025 (SCI-Expanded, Scopus) identifier

2. Boron-Doped Nano Hydroxyapatite Grafts for Bone Regeneration in Rat Mandibular Defects: Boron-Doped Nano Hydroxyapatite Grafts for Bone Regeneration in Rat Mandibular Defects: B. B. Demirkiran et al.

Demirkiran B. B., Şahin İnan Z. D., Hamutoğlu R., Öksüz K. E., Hasbek Z., Altuntaş E. E.
Biological Trace Element Research , vol.203, no.8, pp.4139-4152, 2025 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

3. Injectable vaginal bio-adhesive gel activated by hard nano ceramic particles: in vitro and in vivo properties Gel bioadhesivo vaginal inyectable activado por partículas nanocerámicas duras: propiedades in vitro e in vivo

Şahin-Inan Z. D., Öksüz K. E., Kurt B., Hepokur C., Ünal Y.
Cirugia y Cirujanos , vol.93, no.4, pp.395-410, 2025 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

4. Sustainable Synthesis of Multifunctionalized Amoxicillin-Loaded Biopolymer Foams

Öksüz K. E., Arslan S.
ACS Omega , vol.10, no.15, pp.15525-15539, 2025 (SCI-Expanded) Creative Commons License identifier identifier

5. Deep Analysis of Patella caerulea Calcined Shells for Microwave Applications

Uğurlu E., Karaaslan M., Alkurt F. Ö., Öksüz K. E., Duysak Ö.
Fırat Üniversitesi Mühendislik Bilimleri Dergisi , vol.37, no.1, pp.341-350, 2025 (TRDizin) Creative Commons License identifier

6. Characterization of C/C Composites Produced Using 3D-preforms by CVD/CVI Method for Biomedical Applications

Çamyurdu C., Ateş Ş., Öksüz K. E., Demirkıran A. Ş.
Sakarya University Journal of Science , vol.29, no.1, pp.39-49, 2025 (Scopus) Creative Commons License identifier identifier

7. From biopolymer matrix to medicine: the drug delivery dynamics of amoxicillin-loaded PVA/SA/ZnONPs hydrogels

Abuhamed N., Arslan S., Öksüz K. E., Dinçer E.
International Journal of Polymeric Materials and Polymeric Biomaterials , vol.74, no.6, pp.484-496, 2025 (SCI-Expanded) Creative Commons License identifier

8. Resveratrol-Loaded Silver Nanoparticles as an Effective Strategy for Targeted Breast Cancer Therapy

Topçu E., Hepokur C., Kariper İ. A., Emre Öksüz K. E., Yaylım İ.
ChemistrySelect , vol.9, no.41, 2024 (SCI-Expanded) Creative Commons License identifier

9. Calcium phosphate nano powder biosynthesis from sea urchin shells: a response surface approach

Öksüz K. E., Şen İ., Erşan M.
Journal of Nanoparticle Research , vol.26, no.11, 2024 (SCI-Expanded, Scopus) Creative Commons License identifier

10. Investigation of physicochemical and biological properties of boron-doped biochar

Ateş A., Aydemir B., Öksüz K. E.
Biomass Conversion and Biorefinery , vol.14, no.20, pp.26355-26369, 2024 (SCI-Expanded) Creative Commons License identifier

11. Examination of Biological Activity of Passiflora edulis (Çarkıfelek) Extract via Phytochemical Analysis

Tunç T., Sümer Z., Öksüz K. E.
CUMHURIYET SCIENCE JOURNAL , vol.45, no.3, pp.465-470, 2024 (Peer-Reviewed Journal) Creative Commons License identifier

12. Bioactive coatings on biopolymer materials: evaluation of mechanical, physical, thermal, and in vitro properties

ÖKSÜZ K. E.
Journal of the Australian Ceramic Society , vol.60, no.4, pp.1265-1280, 2024 (SCI-Expanded) Creative Commons License identifier

13. Silk sericin-hydroxyapatite nanoribbons toward structurally stable osteogenic scaffolds

Goksen Tosun N., Özer A., Bektas T., Öksüz K. E., Erden Tayhan S., Ozdemir T.
Journal of the Australian Ceramic Society , vol.59, no.5, pp.1291-1301, 2023 (SCI-Expanded) Creative Commons License identifier

14. Sert Doku Uygulamaları İçin Makro Gözenekli Alüminyum Oksit-Bor Karbür Seramikleri Macro-Porous Aluminum Oxide-Boron Carbide Ceramics for Hard Tissue Applications

Öksüz K. E.
Recep Tayyip Erdoğan Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , vol.4, no.2, pp.65-75, 2023 (Peer-Reviewed Journal) Creative Commons License identifier

15. Plant-inspired adhesive and injectable natural hydrogels: in vitro and in vivo studies

Bohórquez-Moreno C. D., Öksüz K. E., Dinçer E., Hepokur C., Şen İ.
Biotechnology Letters , vol.45, no.9, pp.1209-1222, 2023 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

16. Al2O3 PARTICLE SIZE EFFECT ON REINFORCED CU COMPOSITES PRODUCED BY HIGH ENERGY MILLING

Öksüz K. E.
Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi , vol.10, no.20, pp.125-134, 2023 (Peer-Reviewed Journal) Creative Commons License identifier

17. Investigation of the structure and hardness properties of Anodonta anatina mussel shells

Öksüz K. E., Şereflişan H.
SU URUNLERI DERGISI , vol.40, no.2, pp.132-139, 2023 (TRDizin) Creative Commons License identifier

18. Anti-adhesive effect of naturally obtained dicalcium phosphate dihydrate nanoparticles in the rat uterine wound model Efecto antiadhesivo de nanopartículas de dihidrato de fosfato dicálcico obtenidas naturalmente en el modelo de herida uterina de rata

Kurt B., Öksüz K. E., Sahin-Inan Z. D., Hepokur C.
Cirugia y Cirujanos (English Edition) , vol.91, no.4, pp.457-467, 2023 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

19. Novel Bioactive Glass/Graphene Oxide-Coated Surgical Sutures for Soft Tissue Regeneration

Öksüz K. E., Kurt B., Şahin İnan Z. D., Hepokur C.
ACS Omega , vol.8, no.24, pp.21628-21641, 2023 (SCI-Expanded) Creative Commons License identifier identifier

20. POROUS POLYMER SCAFFOLDS DERIVED FROM BIORESOURCES FOR BIOMEDICAL APPLICATIONS

Bohorquez-Moreno C. D., Öksüz K. E., Dinçer E.
Cellulose Chemistry and Technology , vol.57, no.1-2, pp.107-116, 2023 (SCI-Expanded) Creative Commons License Sustainable Development identifier

21. Microstructure of Eobania vermiculata (Müller, 1774): SEM, F-TIR and XRD methods

Öksüz K. E., Şereflişan H.
Journal of agricultural production (Online) , vol.3, no.2, pp.42-47, 2022 (Peer-Reviewed Journal) Creative Commons License Sustainable Development identifier

22. Novel natural spider silk embedded electrospun nanofiber mats for wound healing

Öksüz K. E., Özkaya N. K., İnan Z. D. Ş., Özer A.
Materials Today Communications , vol.26, 2021 (SCI-Expanded) Creative Commons License identifier identifier

23. The effect of yttrium oxide in hydroxyapatite/aluminum oxide hybrid biocomposite materials: Phase, mechanical and morphological evaluationDer Einfluss von Yttriumoxid in Hydroxylapatit/Aluminiumoxid hybriden Bioverbundwerkstoffen: Gefuge, mechanische und morphologische Evaluation

Özer A., Öksüz K. E.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , vol.50, pp.1382-1390, 2019 (SCI-Expanded) Creative Commons License identifier identifier

24. The Effect of Ball Milling Speed on the Penetration of Cr And Zr into Cu for Production of Cu1CrZr Alloy Powder

Kul M., Özer A., Öksüz K. E., Kurt N.
International Scientific Journal Machines. Technologies. Materials. , vol.13, no.8, pp.362-366, 2019 (Peer-Reviewed Journal) Creative Commons License

25. Effect of Composition and Sintering Temperature on the Structure and Properties of Porous Bioactive Glass Scaffolds

Öksüz K. E.
CHIANG MAI JOURNAL OF SCIENCE , vol.46, pp.568-578, 2019 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

26. Effect of Calcination on Microstructure Development and Properties of Hydroxyapatite Powders Extracted from Human and Bovine Bones

Öksüz K. E., Kılınç S., Özer A.
TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY , vol.78, pp.41-45, 2019 (SCI-Expanded) Creative Commons License identifier identifier

27. Processing and characterization of porous SiC/NiTi alloys for biomedical applications

Şimşir M., Akkan H., Öksüz K. E.
KOVOVE MATERIALY-METALLIC MATERIALS , vol.57, pp.363-369, 2019 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

28. Investigations on Microstructural and Raman Scattering Properties of B2O3 Doped Ba(Ti1-xZrx)O3 Ceramics

Öksüz K. E., Şen Ş., Şen U.
Chemistry Research Journal , vol.3, no.6, pp.71-75, 2018 (Peer-Reviewed Journal) Creative Commons License Sustainable Development

29. Properties of Nano Hydroxyapatite Powder Derived From Human Teeth

Öksüz K. E.
Chemistry Research Journal , vol.3, no.6, pp.76-81, 2018 (Peer-Reviewed Journal) Creative Commons License

30. Effect of Yttria on the Phase Formation and Sintering of HA-Al2O3 Biocomposites

Öksüz K. E., Özer A.
ACTA PHYSICA POLONICA A , vol.131, pp.576-579, 2017 (SCI-Expanded) Creative Commons License identifier identifier

31. Influence of ZrO2 Addition on the Structure and Dielectric Properties of BaTiO3 Ceramics

Öksüz K. E., Şen Ş., Şen U.
ACTA PHYSICA POLONICA A , vol.131, pp.197-199, 2017 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

32. Tribological behavior of Al2O3 and B4C particle-reinforced copper matrix investigated by the Taguchi method

Şahin Y., Öksüz K. E.
MATERIALS TESTING , vol.58, pp.453-461, 2016 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

33. Microstructure and Hardness Characteristics of Al2O3-B4C Particle-Reinforced Cu Matrix Composites

Öksüz K. E., Şahin Y.
ACTA PHYSICA POLONICA A , vol.129, pp.650-652, 2016 (SCI-Expanded) Creative Commons License identifier identifier

34. MICROSTRUCTURAL AND PHASE STUDY OF Y2O3 DOPED HYDROXYAPATITE/Al2O3 BIOCOMPOSITES

Öksüz K. E., Özer A.
DIGEST JOURNAL OF NANOMATERIALS AND BIOSTRUCTURES , vol.11, pp.167-172, 2016 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

35. Processing and Mechanical Properties of B4C/Diamond Impregnated Fe/Co MMC

Öksüz K. E., Şimşir M.
ACTA PHYSICA POLONICA A , vol.127, no.4, pp.1139-1141, 2015 (SCI-Expanded) Creative Commons License identifier

36. The Effects of Aging on the Hardness and Wear Behaviour of 2124 Al Alloy/B4C Composites

Öksüz K. E., Oskay K. O.
ACTA PHYSICA POLONICA A , vol.127, pp.1367-1369, 2015 (SCI-Expanded) Creative Commons License identifier

37. Effects of B2O3 addition on the sintering behavior of 0-5-10% ZrO2 doped BaTiO3 based ceramics

ÖKSÜZ K. E., Şen Ş., Şen U.
Acta Physica Polonica A , vol.127, no.4, pp.1086-1089, 2015 (SCI-Expanded) identifier

38. Effects of B2O3 Addition on the Sintering Behavior of 0-5-10% ZrO2 Doped BaTiO3 Based Ceramics

Öksüz K. E., Şen Ş., Şen U.
ACTA PHYSICA POLONICA A , vol.127, pp.1086-1089, 2015 (SCI-Expanded, Scopus) Creative Commons License identifier

39. Microstructural evaluation and characterization of solid-state reaction of B2O3 doped BaZrxTi1-xO3 ceramics

Öksüz K. E., Şen Ş., Şen U.
JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , vol.51, pp.137-143, 2015 (SCI-Expanded) Creative Commons License Sustainable Development identifier identifier

40. Effects of Al2O3 Nanopowders on the Wear Behavior of NiTi Shape Memory Alloys

Şahin Y., Öksüz K. E.
JOM , vol.66, pp.61-65, 2014 (SCI-Expanded) Creative Commons License identifier identifier

41. Effects of sintering temperature and addition of Fe and B4C on hardness and wear resistance of diamond reinforced metal matrix composites

Şimşir M., Öksüz K. E.
JOURNAL OF SUPERHARD MATERIALS , vol.35, no.6, pp.369-382, 2013 (SCI-Expanded) Creative Commons License identifier identifier

42. TRIBOLOGICAL BEHAVIOUR OF Al2014-Al2O3 PARTICLE-REINFORCED COMPOSITES PRODUCED BY POWDER METALLURGY METHOD

Şahin Y., Öksüz K. E.
JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION , vol.19, pp.190-201, 2013 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

43. ABRASIVE WEAR BEHAVIOUR OF SiCp-REINFORCED Al2124 ALLOY COMPOSITE BASED ON THE TAGUCHI METHOD

Şahin Y., Öksüz K. E.
JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION , vol.19, pp.520-538, 2013 (SCI-Expanded, Scopus) Creative Commons License identifier identifier
Papers Presented at Peer-Reviewed Scientific Conferences 50

1. Demir (III) Oksit (Fe2O3) Nanopartikülerinin Asidik ve Alkali Ortamlarda Zeta Potansiyeli Değişimleri

ARSLAN S., ÖKSÜZ K. E.
Karadeniz - 15th International Conference On Applied Sciences, Rize, Turkey, 08 March 2024, pp.254-260, (Full Text)

2. Ratlarda Kritik Boyutlu Mandibula Korpus Defektinde Bor Katkılı Nano Hidroksiapatit Biyokompozitlerin Kemik Rejenerasyonu Üzerine Etkisinin Değerlendirilmesi

Demirkıran B. B., Şahin İnan Z. D., Hamutoğlu R., Öksüz K. E., Hasbek Z., Altuntaş E. E.
44. Türk Ulusal Kulak Burun Boğaz ve Baş Boyun Cerrahisi Kongresi, Antalya, Turkey, 15 - 19 November 2023, (Full Text) Creative Commons License

3. Nanoparticle Production Using Food Waste: Sugar Beet Pulp (Paste) Example

Balcan O., Sarıoğlu Cebeci M., Öksüz K. E.
ICONFOOD’23 2nd International Congress on Food Researches, Sivas, Turkey, 16 - 18 October 2023, pp.537, (Full Text) Creative Commons License

4. Meme Kanseri Tedavisi için Sitratla Stabilize Edilmiş Fe3O4 Nanopartikülleri/Pertuzumab İçeren Makro Gözenekli Süngerin Geliştirilmesi

Alandağ C., Aslan S., Öksüz K. E., Yılmaz Göç R.
10. Türk Tıbbi Onkoloji Kongresi, Antalya, Turkey, 26 - 30 April 2023, pp.108, (Summary Text) Creative Commons License

5. Asetaminofen ile Hasar Gören Böbreklerde Eritropoetin ve Mezenkimal Kök Hücre Uygulamasının Taramalı Elektron Mikroskobu ile Değerlendirilmesi

Göç R., Öksüz K. E., Çelik U., Çoban Z. B., Tandıroğlu A., Yay A. H., et al.
KARADENIZ 9th International Conference on Apllied Sciences, Artvin, Turkey, 25 - 26 June 2022, vol.1, pp.30-31, (Summary Text) Creative Commons License

6. Ardıç Yağı Katkılı Hidrofilik Fiber İpliklerin Antibakteriyel ve Hemolitik Aktivitelerinin İncelenmesi

Öksüz K. E., Göç R., Dinçer E., Akdeniz E., Şahin F. B., Çelik U.
KARADENIZ 9th International Conference on Apllied Sciences, Artvin, Turkey, 25 - 26 June 2022, vol.1, pp.32, (Summary Text) Creative Commons License Sustainable Development

7. Biyoaktif Nanoseramik Katkılı Biyopolimer Filmlerin Üretimi ve Karakterizasyonu

Öksüz K. E., Göç R., Beyazıt C., Alizadehyegani N., Akbarlı N.
KARADENIZ 9th International Conference on Apllied Sciences, Artvin, Turkey, 25 - 26 June 2022, vol.1, pp.29, (Summary Text) Creative Commons License

8. Characterization of Poly(Vinyl Alcohol)/Sodium Alginate Nanofibers Produced By Electrospinning Method

Tuna E. B., Öksüz K. E., Özer A.
6nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’21), Nevşehir, Turkey, 26 - 28 November 2021, vol.1, no.1, pp.409-413 Creative Commons License

9. The Effect of Ball Milling Speed on the Penetration of Cr and Zr into Cu for Production of Cu1CrZr Alloy Powder

Kul M., Özer A., Öksüz K. E., Kurt N.
XVI. International Scientific Conference Machines. Technologies., Sofija, Bulgaria, 11 - 14 September 2019, vol.3, pp.233-237, (Full Text) Creative Commons License

10. Preparation of Highly Porous ZrO2 Bone Scaffold

Öksüz K. E.
6. International Conference on Mathematics, Engineering, Natural Medical Sciences, (EJONS 6), Adana, Turkey, 8 - 10 March 2019, vol.1, pp.595-600, (Full Text) Creative Commons License

11. Ultrahigh Density α-Al2O3 Ceramics Produced By Slip Casting

Öksüz K. E.
6. International Conference on Mathematics, Engineering, Natural Medical Sciences, (EJONS 6), Adana, Turkey, 8 - 10 March 2019, vol.1, pp.585-594, (Full Text) Creative Commons License

12. İpek serisin–Hap-RGD peptiti içeren nanofibriler liflerin kemik doku mühendisliği çalışmaları için üretilmesi

Bektaş T., Rıschka K., Öksüz K. E., Özer A., Özdemir T.
23. Biyomedikal Bilim ve Teknoloji Sempozyumu, BIOMED2018-TR, İstanbul, Turkey, 15 - 16 December 2018, vol.1, pp.132, (Summary Text) Creative Commons License

13. The effect of ball milling time on the mechanochemical activation properties of Cu1CrZr alloys

Özer A., Öksüz K. E., Sübütay H., Kurt N., Şimşir M., Kumruoğlu L. C., et al.
4th International Turkic World Conference on Chemical Sciences and TechnologiesITWCCST 2018, Kiev, Ukraine, 7 - 10 September 2018, vol.1, (Summary Text) Creative Commons License

14. The sintering properties of Cu1CrZr alloys produced by mechanochemical activation

Öksüz K. E., Sübütay H., Şimşir M., Kumruoğlu L. C., Kul M., Özer A.
4th International Turkic World Conference on Chemical Sciences and Technologies ITWCCST 2018, Kyyiv, Ukraine, 7 - 10 September 2018, vol.1, pp.0-63, (Summary Text) Creative Commons License

15. Structural Evolution and Dielectric Properties of Ba(Ti1-x Zrx)O3Perovskite Ceramics

Öksüz K. E., Şen Ş., Şen U.
ICSTR Athens – International Conference on Science TechnologyResearch, 19-20 July, 2018, Athens, Greece, 19 - 20 July 2018, vol.1, pp.9, (Summary Text) Creative Commons License

16. Effect of SiC Particle Size on the Physical and Mechanical Properties of NiTi Alloys

Akkan H., Şimşir M., Öksüz K. E.
10th International Conference on Materials Science Engineering (Bramat 2017), Brasov, Romania, 8 - 11 March 2017, vol.907, pp.3-7, (Full Text) Creative Commons License identifier

17. The Influence of Composition and Calcination Temperature on the Phases in (Ba1-xSrxZr)O3 Perovskites

Torman M., Öksüz K. E., Şen Ş., Şen U.
10th International Conference on Materials Science Engineering (Bramat 2017), Brasov, Romania, 8 - 11 March 2017, vol.907, pp.38-42, (Full Text) Creative Commons License identifier

18. Tribological Behavior of Distaloy DC Components

Öksüz K. E., Akınalp Y. A., Kumruoğlu L. C.
10th International Conference on Materials Science Engineering (Bramat 2017), Brasov, Romania, 8 - 11 March 2017, vol.907, pp.121-125, (Full Text) Creative Commons License identifier

19. Dielectric Properties of Sr-Doped BaZrO3 Ceramics

Torman M., Öksüz K. E., Şen Ş., Şen U.
10th International Conference on Materials Science Engineering (Bramat 2017), Brasov, Romania, 8 - 11 March 2017, vol.907, pp.21-24, (Full Text) Creative Commons License identifier

20. Synthesis and Characterization of CeO2 Doped ZrO2 Ceramics by a Simple Sol-Gel Route

Özer U. H., Öksüz K. E., Özer A.
10th International Conference on Materıals Science Engineering (Bramat 2017), Brasov, Romania, 8 - 11 March 2017, vol.907, pp.56-60 Creative Commons License identifier

21. Thermal behaviour and structure of BaZrO3 nanoparticles

ÖKSÜZ K. E., ŞEN Ş., ŞEN U.
4th Central and Eastern European Committee for Thermal Analysis and Calorimetry, Kişinev, Moldova, 28 - 31 August 2017, vol.1, (Summary Text)

22. Investigations on Microstructural and Dielectric Properties of Ba Ti1xZrxO3 Ceramics

ÖKSÜZ K. E., ŞEN Ş., ŞEN U.
6th International Advances in Applied Physics and Materials Science Congress Exhibition, İstanbul, Turkey, 1 - 03 June 2016, (Summary Text)

23. TiO2 Grafen Nano Kompozit Partikül Takviyeli Koruyucu Tekstillerin Geliştirilmesi

Öksüz K. E., Özer A.
12. Ulusal Kimya Mühendisliği Kongresi (UKMK2016), İzmir, Turkey, 23 - 26 August 2016, vol.1, pp.1298-1309, (Full Text) Creative Commons License

24. Microstructural and Dielectric Properties of Ba Ti1 xZrx O3 Nano ceramics

ÖKSÜZ K. E., ŞEN Ş., ŞEN U.
45th Internatioal SchoolConference on the Physics of Semiconductors, Katowice-Szczyrk, Poland, 18 - 24 June 2016, (Summary Text)

25. Sintering Behavior and Microstructural Evaluation of MgO Doped Al2O3

Özer A., Kumruoğlu L. C., Çelik M., Emircan Ç., Öksüz K. E.
18th International Conference Materials, Methods Technologies, Burgas, Bulgaria, 26 - 30 June 2016, vol.10, pp.367-373, (Full Text) Creative Commons License

26. Effect of Sintering Temperature on Dielectric Properties of SiO2 Doped BaTiO3 Ceramics

Öksüz K. E., Torman M., Şen Ş., Şen U.
18th International Conference Materials, Methods Technologies, Burgas, Bulgaria, 26 - 30 June 2016, vol.10, pp.361-366, (Full Text) Creative Commons License

27. Sintering Characteristics and Grain Growth Behavior of SiO2 Doped BaTiO3 Ceramics

Öksüz K. E., Şen Ş., Şen U.
International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), Nevşehir, Turkey, 6 - 08 April 2016, vol.1, pp.401-405, (Full Text) Creative Commons License

28. A Study on Al2O3 SiC B4C Reinforced Cu Sn Matrix Composite by Warm Compaction Powder Metallurgy

Öksüz K. E.
The 9th International Conference on Materials Science Engineering – (BraMat 2015)., Brasov, Romania, 5 - 07 March 2015, vol.1128, pp.123-126, (Full Text) Creative Commons License

29. Processing and Characterization of Porous Ti-HA Biocomposites

Öksüz K. E., Kumruoğlu L. C., Dinçer C.
International Porous and Powder Materials Symposium and Exhibition, PPM 2015, İzmir, Turkey, 15 - 18 September 2015, vol.1, pp.602-605, (Full Text) Creative Commons License

30. Effect of Sic(p) on the Microstructure and Mechanical Properties of Sintered Distaloy DC Composites

Öksüz K. E., Kumruoğlu L. C., Tur O.
5th International Biennial Conference on Ultrafine Grained and Nanostructured Materials, UFGNSM15, Tehran, Iran, 11 - 12 November 2015, vol.11, pp.49-54, (Full Text) Creative Commons License identifier

31. Phase and Morphological Evaluation of Mechanically Activated Sintered YAG Powders

Öksüz K. E., Apaydin F., Bozdag A. E., Cevik M., Ozer A.
5th International Biennial Conference on Ultrafine Grained and Nanostructured Materials, UFGNSM15, Tehran, Iran, 11 - 12 November 2015, vol.11, pp.44-48, (Full Text) Creative Commons License identifier

32. Fabrication and Characterization of TiNi/SiCp Shape Memory Composites

Öksüz K. E., Şimşir M., Akkan H.
17th International Metallurgy Materials Congress (IMMC 2014), İstanbul, Turkey, 11 - 13 September 2014, vol.1, pp.731-737, (Full Text) Creative Commons License

33. Production of V-B Reinforced Fe Matrix Composites

Öksüz K. E., Çevik M., Ahmet Enbiya B., Özer A., Şimşir M.
ICMSMM 2014), XI International Conference on Materials Science, Metal and Manufacturing, Barcelona, Spain, 18 - 19 August 2014, vol.8, pp.704-708, (Full Text) Creative Commons License

34. CHARACTERIZATION AND MECHANICAL PROPERTIES OF PM Fe-Cu/SiCp ALLOYS

Öksüz K. E., Gün T., Şimşir M.
4th International Conference on Ultrafine Grained and Nano-Structured Materials (UFGNSM 2013), Tehran, Iran, 5 - 06 November 2013, vol.829, pp.73-75, (Full Text) Creative Commons License identifier identifier

35. Fabrication and Characterization of Porous Bioglass Ceramic

Öksüz K. E., Bağırov H., Yılmaz H., Buket S., Yıldırım V.
International Porous and Powder Materials Symposium and Exhibition, İzmir, Turkey, 3 - 06 September 2013, pp.602-605, (Full Text) Creative Commons License

36. Investigation of Mechanical Properties and Microstructure of AA2024 and AA7075

Öksüz K. E., Bağırov H., Şimşir M., Ceyhun K., Aykut Ö., Yusuf Ziya D., et al.
4th International Conference on Mechanical and Aerospace Engineering (ICMAE 2013), Moscow, Russia, 20 - 21 July 2013, vol.390, pp.547-551, (Full Text) Creative Commons License

37. S N ratio analysis of tribological behavior of SiCp reinforced Al2124 based metal matrix composite

Şahin Y., Öksüz K. E.
The 3rd International Conference on Advanced Materials Research (ICAMR 2013), Dubai, United Arab Emirates, 19 - 20 January 2013, vol.685, pp.24-29, (Full Text) Creative Commons License identifier identifier

38. The Effect of Al2O3-SiC and B4C Additions on Mechanical Properties of CuSn Matrix Composites for Cutting Tools

Öksüz K. E., Bağırov H., Yılmaz H., Buket S., Yıldırım V.
The 3rd International Conference on Advanced Materials Research (ICAMR 2013), Dubai, United Arab Emirates, 19 - 20 January 2013, vol.685, pp.15-18, (Full Text) Creative Commons License

39. The Effect of B4C Additions on Mechanical Properties of Fe Cu Co Matrix Composites For Diamond Tools

Öksüz K. E., Şahin Y., Yildirim E. S., Kayır Y.
The 3rd International Conference on Advanced Materials Research (ICAMR 2013), Dubai, United Arab Emirates, 19 - 20 January 2013, vol.685, pp.30-34 Creative Commons License identifier identifier

40. TM Metodu ile Üretilen Al2O3 Takviyeli Aluminyum Esaslı Kompozitlerin Aşınma Davranışı için İstatiksel Model Oluşturulması

Şahin Y., Öksüz K. E.
Tasarım-İmalat ve Analiz Kongresi ve CAD-CAM Günleri, (TİMAK) 2012, Balıkesir, Turkey, 29 - 30 November 2012, vol.1, pp.442-455, (Full Text) Creative Commons License Sustainable Development

41. The Microstructure and Hardness of Al2O3 Particle Reinforced Composite

Şahin Y., Öksüz K. E.
The 3rd International Conference on Mechanical and Aerospace Engineering, ICMAE’2012, Paris, France, 7 - 08 July 2012, vol.232, pp.39-44 Creative Commons License identifier

42. Caratterizzazione di Materiali Compositi a Matrice Metallica Fe Co e Rinforzo B4C Impregnati di Diamante

Öksüz K. E., Şimşir M., Şahin Y.
Diamante Applicazioni Tecnologia, Milan, Italy, 12 June - 12 September 2012, vol.18, pp.65-71, (Full Text) Creative Commons License

43. Wear behavior of diamond plus SiCp-reinforced metal matrix composite by Taguchi method

Şahin Y., Öksüz K. E., Şimşir M.
3rd International Conference on Manufacturing Science and Engineering (ICMSE 2012), Xiamen, China, 27 - 29 March 2012, pp.1309-1312, (Full Text) Creative Commons License identifier

44. Characterization of Diamond Impregnated B4C Fe Co MMC

Öksüz K. E., Şimşir M., Şahin Y.
Euro PM 2011 Congress and Exhibition, Barcelona, Spain, 9 - 12 October 2011, vol.1, pp.247-253, (Full Text) Creative Commons License identifier

45. Toz Metalurjisi ile Üretilen ve Mermer Doğal Taş Kesmede Kullanılan Kesici Uçlara B4C İlavesinin Etkilerinin İncelenmesi

Öksüz K. E., Şimşir M., Şahin Y.
6. Uluslararası Toz Metalurjisi Konferansı ve Sergisi, (6IPMC), Ankara, Turkey, 5 - 09 October 2011, vol.1, pp.588-591, (Full Text) Creative Commons License

46. The Effect of Process Parameters on Mechanical and Dry Wear Behavior of Aluminum Composite

Şahin Y., Öksüz K. E.
6th International Powder Metallurgy Conference and Exhibition (6IPMC), Ankara, Turkey, 5 - 09 October 2011, vol.1, pp.146-150, (Full Text) Creative Commons License

47. Wear Studies on Diamond Reinforced Fe Co Based Metal Matrix Composites

Öksüz K. E., Şimşir M., Şahin Y.
6th International Powder Metallurgy Conference and Exhibition (6IPMC), Ankara, Turkey, 5 - 09 October 2011, vol.1, pp.151-158, (Full Text) Creative Commons License

48. Tribological Behavior of Diamond Reinforced Fe Co Composite by Taguchi Method

Öksüz K. E., Şimşir M., Şahin Y.
18th International Conference on Composite Materials, Jeju-Si, South Korea, 21 - 26 August 2011, vol.1, pp.1-6, (Full Text) Creative Commons License identifier

49. Investigation of the wear behavior of B4C reinforced Fe/Co matrix composites produced by hot press

Şimşir M., Öksüz K. E., Şahin Y.
11th International Conference on the Mechanical Behavior of Materials (ICM), Como, Italy, 01 January 2011, vol.10, pp.3195-3201, (Full Text) Creative Commons License identifier identifier

50. Soğuma Hızının Çelik Takviyeli Dökme Demirin Ara Yüzey Dayancı ve Mikroyapıya Etkisi

ŞİMŞİR M., ÖKSÜZ K. E.
3.Isıl İşlem Sempozyumu ve Sergisi, İstanbul, Turkey, 14 - 15 November 2009, pp.52-61, (Full Text)
Books 6

1. Challenges and toxicity assessment of sericin materials in bio-based applications

Öksüz K. E.
in: Science and Technology of Silkworm Sericin, Maria Hanna J.,Mathew Sneha Sabu,Rajkhowa Rangam,Thomas Sabu, Editor, Elsevier, Mumbai, pp.491-513, 2025 Creative Commons License

2. Biocomposites: Advances in Research and Applications Chapter 6. Dental Bioceramics: From Lab to Clinical Practice

Öksüz K. E.
in: Biocomposites: Advances in Research and Applications, James R. Bush, Editor, Nova Science Publishers, Inc., New York, pp.227-246, 2023 Creative Commons License

3. Biocomposites: Advances in Research and Applications Chapter 2. Boron-Substituted Biomaterials

Abuhamed N., Arslan S., Öksüz K. E.
in: Biocomposites: Advances in Research and Applications, James R. Bush, Editor, Nova Science Publishers, Inc., New York, pp.105-140, 2023 Creative Commons License

4. Bioprinting the Human 3D-Printable Materials for Tissue Engineering

Öksüz K. E.
in: Bioprinting the Human, Soner Şahin,MD – Professor,Faculty of Medicine,Department of Neurosurgery,Nisantasi University,Istanbul,Turkey,Kenan Demir,MD – Health Sciences University,Samsun Training and Research Hospital,Samsun Eğitim ve Araştırma Hastanesi,İlkadım,Turkey., Editor, NOVA Science Publishers Inc. , New York, pp.17-36, 2022 Creative Commons License

5. High Performance and Optimum Design of Structures and Materials Book Section:11 Surface Modification

Öksüz K. E., Gün T., Şimşir M.
in: High Performance and Optimum Design of Structures and Materials Book, W.P. De Wilde,Vrije Universiteit Brussel,Belgium S. Hernández,University of A Coruña,Spain C.A. Brebbia,Wessex Institute of Technology,UK, Editor, WIT Press , London, pp.545-552, 2014 Creative Commons License

6. Powder Metallurgy for Automotive Aluminium Alloys Hard and Super Hard Materials Book Composites Chapter 25: Investigation of Mechanical Behavior of B4C/Diamond Reinforced Fe/Co Metal Matrix Composites Produced by PM

Şimşir M., Öksüz K. E., Şahin Y.
in: Powder Metallurgy for Automotive Aluminium Alloys Hard and Super Hard Materials Book, P.Ramakrishan, Editor, MEDTEC Publisher, Scientific Int.Pvt.Ltd., Pune, pp.203-209, 2014 Creative Commons License
Metrics

Publication

99

Publication (WoS)

40

Publication (Scopus)

46

Citation (WoS)

61

H-Index (WoS)

5

Citation (Scopus)

215

H-Index (Scopus)

8

Citation (Scholar)

190

H-Index (Scholar)

7

Citation (Sum Other)

10

Project

13

Open Access

90
UN Sustainable Development Goals