| AVESİS

Yayın Türü

Yayın Alt Türü

(WOS) Araştırma Alanları

SDG

Araştırmacılar

Yıl


Suitability of Water Quality for Irrigation Purposes Using GIS-Based Irrigation Water Quality Index ŞİMŞİR M., YILDIZ S., KARAKUŞ C. B., Özbek D. Irrigation and Drainage , cilt.74, sa.3, ss.1103-1116, 2025 (SCI-Expanded, Scopus)
Injectable vaginal bio-adhesive gel activated by hard nano ceramic particles: in vitro and in vivo properties Gel bioadhesivo vaginal inyectable activado por partículas nanocerámicas duras: propiedades in vitro e in vivo Şahin-Inan Z. D., Öksüz K. E., Kurt B., Hepokur C., Ünal Y. Cirugia y Cirujanos , cilt.93, sa.4, ss.395-410, 2025 (SCI-Expanded, Scopus)
Functionally graded Al2O3-based ceramic systems by gel casting method TOPATEŞ G., AKÇA E., Tür Y. K., DURAN C. International Journal of Applied Ceramic Technology , cilt.22, sa.1, 2025 (SCI-Expanded)
Enhancing low-rank coal beneficiation: optimization of aggloflotation process for Sivas/Gemerek lignite Kaya Ö., Taşdöğen Cebe N. International Journal of Coal Preparation and Utilization , cilt.45, sa.3, ss.672-682, 2025 (SCI-Expanded, Scopus)
Feldspar flocculation performance using cationic and anionic flocculants in dual system: evaluation by turbidity, settling rate and flocculation efficiency Kaya Ö., Özkan A. Journal of scientific reports-A (Online) , sa.060, ss.99-106, 2025 (TRDizin)
Sustainable Synthesis of Multifunctionalized Amoxicillin-Loaded Biopolymer Foams Öksüz K. E., Arslan S. ACS Omega , cilt.10, sa.15, ss.15525-15539, 2025 (SCI-Expanded)
Deep Analysis of Patella caerulea Calcined Shells for Microwave Applications Uğurlu E., Karaaslan M., Alkurt F. Ö., Öksüz K. E., Duysak Ö. Fırat Üniversitesi Mühendislik Bilimleri Dergisi , cilt.37, sa.1, ss.341-350, 2025 (Hakemli Dergi)
Phase-dependent catalytic performance of sol-gel synthesized ZrO2 in supercritical water gasification of formaldehyde ATEŞ A., Mert O., ÖKSÜZ K. E. International Journal of Hydrogen Energy , cilt.177, 2025 (SCI-Expanded, Scopus)
Feldspat Flokülasyonunda Süspansiyon pH’sı, Karıştırma Hızı, Karıştırma Süresi ve Katı Oranının Etkilerinin Non-İyonik Flokülantlar Kullanılarak İncelenmesi Kaya Ö., Özkan A. Sivas Cumhuriyet University Journal of Science and Technology , cilt.4, sa.1, ss.51-58, 2025 (Hakemli Dergi)
From biopolymer matrix to medicine: the drug delivery dynamics of amoxicillin-loaded PVA/SA/ZnONPs hydrogels Abuhamed N., Arslan S., Öksüz K. E., Dinçer E. International Journal of Polymeric Materials and Polymeric Biomaterials , cilt.74, sa.6, ss.484-496, 2025 (SCI-Expanded)
Comparative analysis of four different fly ash sources as additives in porcelain ceramics: microstructural and mechanical characterization Erdoğan İ., Kurşun H., Önen U., Boyraz T., Kurşun T. JOURNAL OF CERAMIC PROCESSING RESEARCH , cilt.26, sa.5, ss.703-716, 2025 (SCI-Expanded, Scopus)
Boron-Doped Nano Hydroxyapatite Grafts for Bone Regeneration in Rat Mandibular Defects: Boron-Doped Nano Hydroxyapatite Grafts for Bone Regeneration in Rat Mandibular Defects: B. B. Demirkiran et al. Demirkiran B. B., Şahin İnan Z. D., Hamutoğlu R., Öksüz K. E., Hasbek Z., Altuntaş E. E. Biological Trace Element Research , cilt.203, sa.8, ss.4139-4152, 2025 (SCI-Expanded)
Characterization of C/C Composites Produced Using 3D-preforms by CVD/CVI Method for Biomedical Applications Çamyurdu C., Ateş Ş., Öksüz K. E., Demirkıran A. Ş. Sakarya University Journal of Science , cilt.29, sa.1, ss.39-49, 2025 (Scopus)
Linyit Kömürünün Flotasyon ile Zenginleştirilmesinde Bazı Proses Parametrelerinin Yanabilir Verim ve Kül İçeriği ile Değerlendirilmesi Kaya Ö., Özütürker Ş. Sivas Cumhuriyet University Journal of Science and Technology , cilt.4, sa.1, ss.32-37, 2025 (Hakemli Dergi)
Microstructural engineering of crystallographically textured BiScO3-PbTiO3-based piezoceramics with improved high-temperature stability Astan S., AKÇA E. Journal of Alloys and Compounds , cilt.1032, 2025 (SCI-Expanded)
Calcium phosphate nano powder biosynthesis from sea urchin shells: a response surface approach Öksüz K. E., Şen İ., Erşan M. Journal of Nanoparticle Research , cilt.26, sa.11, 2024 (SCI-Expanded, Scopus)
Organo-soluble dendritic zinc phthalocyanine: photoluminescence and fluorescence properties Yabaş E., Kölemen S., Başer P., Kul M. Inorganic and Nano-Metal Chemistry , cilt.54, sa.9, ss.871-877, 2024 (SCI-Expanded)
Eco-Friendly Green Synthesis of Zinc Oxide Nano/Microparticles Using Aqueous Leaf Extract of Polygonum cognatum Meisn. Plant AKÇA E. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.28, sa.5, ss.984-999, 2024 (Scopus, TRDizin)
Oil Agglomeration in Zonguldak Bituminous Coal Dust: The Role of Inorganic Materials ŞAHBUDAK K., CEBECİ Y. Scientific Mining Journal , cilt.63, 2024 (Hakemli Dergi)
The Relationship Between Bending Strength and Porosity in Ceramic Brick That Contains Vermiculite Boyraz T., Önen U. International Journal of Engineering Science Technologies , cilt.8, sa.3, ss.47-57, 2024 (Hakemli Dergi)
Abaca fiber as an efficient reinforcement for high mechanical performance in metakaolin-based geopolymers Constâncio Trindade A. C., Sood S. S., Silva D. d. C., Ozer A., Kriven W. M. International Journal of Applied Ceramic Technology , cilt.21, sa.2, ss.1154-1169, 2024 (SCI-Expanded)
Bioactive coatings on biopolymer materials: evaluation of mechanical, physical, thermal, and in vitro properties ÖKSÜZ K. E. Journal of the Australian Ceramic Society , cilt.60, sa.4, ss.1265-1280, 2024 (SCI-Expanded)
Examination of Biological Activity of Passiflora edulis (Çarkıfelek) Extract via Phytochemical Analysis Tunç T., Sümer Z., Öksüz K. E. CUMHURIYET SCIENCE JOURNAL , cilt.45, sa.3, ss.465-470, 2024 (Hakemli Dergi)
The use of petroleum derivative mixtures as bridging liquid for oil agglomeration of lignite coal Kaya Ö., Taşdöğen Cebe N. International Journal of Coal Preparation and Utilization , cilt.44, sa.4, ss.388-398, 2024 (SCI-Expanded)
The Effect of Various Parameters in the Sulfuric Acid Leaching of Low Grade Zinc Oxide Ore of Niğde-Türkiye Kaya Ö., Uysal G. SAKARYA UNIVERSITY JOURNAL OF SCIENCE , cilt.28, sa.5, ss.930-936, 2024 (Scopus)
Prediction of wear properties of CaO and MgO doped stabilized zirconia ceramics produced with different pressing methods using adaptive neuro fuzzy inference systems Vorhersage der Verschleißeigenschaften von CaO- und MgO-dotierten stabilisierten Zirkonoxidkeramiken, die mit verschiedenen Pressmethoden unter Verwendung adaptiver Neuro-Fuzzy-Inferenzsysteme hergestellt wurden Yüksek A. G., Boyraz T., Akkuş A. Materialwissenschaft und Werkstofftechnik , cilt.55, sa.9, ss.1227-1237, 2024 (SCI-Expanded)
Resveratrol-Loaded Silver Nanoparticles as an Effective Strategy for Targeted Breast Cancer Therapy Topçu E., Hepokur C., Kariper İ. A., Emre Öksüz K. E., Yaylım İ. ChemistrySelect , cilt.9, sa.41, 2024 (SCI-Expanded)
Investigation of physicochemical and biological properties of boron-doped biochar Ateş A., Aydemir B., Öksüz K. E. Biomass Conversion and Biorefinery , cilt.14, sa.20, ss.26355-26369, 2024 (SCI-Expanded)
Prediction of Wear Properties of CaO and MgO Doped Stabilized Zirconia Ceramics with Artificial Neural Networks YÜKSEK A. G., BOYRAZ T., AKKUŞ A. Transactions of the Indian Ceramic Society , cilt.83, sa.3, ss.188-198, 2024 (SCI-Expanded)
Correlation between bending strength and porosity in vermiculite added ceramic bodies Önen U., BOYRAZ T. Journal of Ceramic Processing Research , cilt.25, sa.4, ss.624-632, 2024 (SCI-Expanded)
Preparation and characterization of Fe3O4/ZIF-8 and Fe3O4–MnO2/ZIF-8 composites Kümbetlioğlu F., OSKAY K. O., ATEŞ A. Journal of the Iranian Chemical Society , cilt.21, sa.4, ss.1079-1088, 2024 (SCI-Expanded)
Plant-inspired adhesive and injectable natural hydrogels: in vitro and in vivo studies Bohórquez-Moreno C. D., Öksüz K. E., Dinçer E., Hepokur C., Şen İ. Biotechnology Letters , cilt.45, sa.9, ss.1209-1222, 2023 (SCI-Expanded, Scopus)
Prediction of Wear Properties of Experimental Produced Porcelain Ceramics Using Artificial Neural Networks (ANN) Yüksek A. G., Boyraz T., Akkuş A. Sivas Cumhuriyet Üniversitesi Mühendislik Fakültesi Dergisi , cilt.1, sa.2, ss.66-74, 2023 (Hakemli Dergi)
Fabrication and Characterization of High Performance PVDF-based flexible piezoelectric nanogenerators using PMN-xPT (x:30, 32.5, and 35) particles Paralı L., Koç M., AKÇA E. Ceramics International , cilt.49, sa.11, ss.18388-18396, 2023 (SCI-Expanded, Scopus)
Anti-adhesive effect of naturally obtained dicalcium phosphate dihydrate nanoparticles in the rat uterine wound model Efecto antiadhesivo de nanopartículas de dihidrato de fosfato dicálcico obtenidas naturalmente en el modelo de herida uterina de rata Kurt B., Öksüz K. E., Sahin-Inan Z. D., Hepokur C. Cirugia y Cirujanos (English Edition) , cilt.91, sa.4, ss.457-467, 2023 (SCI-Expanded, Scopus)
Enrichment of Sivas/Gemerek Lignite Coal by Oil Agglomeration using Different Vegetable Oils KAYA Ö., TAŞDÖĞEN N. Journal of scientific reports-A (Online) , sa.54, ss.285-295, 2023 (TRDizin)
Investigation of the structure and hardness properties of Anodonta anatina mussel shells Öksüz K. E., Şereflişan H. SU URUNLERI DERGISI , cilt.40, sa.2, ss.132-139, 2023 (TRDizin)
Optimization of sponge iron (direct reduced iron) production with Box-Wilson experimental design by using iron pellets and lignite as reductant Sönmez İ., ŞAHBUDAK K. Revista de Metalurgia , cilt.59, sa.2, 2023 (SCI-Expanded)
Efficient Zinc Removal from Blast Furnace Sludge Using Choline Chloride–Malonic Acid: Towards Sustainable Recycling of Iron Extraction Waste Kul M., OSKAY K. O., Doğan M., ASLAN N. JOM , cilt.75, sa.9, ss.3882-3889, 2023 (SCI-Expanded)
Novel Bioactive Glass/Graphene Oxide-Coated Surgical Sutures for Soft Tissue Regeneration Öksüz K. E., Kurt B., Şahin İnan Z. D., Hepokur C. ACS Omega , cilt.8, sa.24, ss.21628-21641, 2023 (SCI-Expanded)
Al2O3 PARTICLE SIZE EFFECT ON REINFORCED CU COMPOSITES PRODUCED BY HIGH ENERGY MILLING Öksüz K. E. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi , cilt.10, sa.20, ss.125-134, 2023 (Hakemli Dergi)
Preparation, Characterization, and Application of Metal Oxide-Doped Zeolitic Imidazolate Framework Kümbetlioğlu F., OSKAY K. O., ÇIPLAK Z., ATEŞ A. ACS Omega , cilt.8, sa.30, ss.27650-27662, 2023 (SCI-Expanded)
Evaluation of iron containing biochar composites prepared by different preparation methods for H2O2 sensing ATEŞ A., OSKAY K. O. Journal of the Taiwan Institute of Chemical Engineers , cilt.152, 2023 (SCI-Expanded)
Regression Modelling to Study Wear Properties of Experimental Produced Porcelain Ceramics YÜKSEK A. G., BOYRAZ T., AKKUŞ A. Teknik Meslek Yüksekokulları Akademik Araştırma Dergisi , cilt.2, sa.2, 2023 (Hakemli Dergi)
Direct co-deposition of binder-free Cu-biochar-based nonenzymatic disposable sensing element for electrochemical glucose detection Larasati L. D., ATEŞ A., OSKAY K. O. Surfaces and Interfaces , cilt.42, 2023 (SCI-Expanded)
Electrochemical Energy Storage Capacity of Surface Engineered Renewable Carbon Derived from Industrial Tea Waste by HNO3 and K2CO3 Gökçen Akgül A., OSKAY K. O., Buldu-Akturk M., Karamustafa A., Sözer S., Maden T. B., et al. Surface Engineering and Applied Electrochemistry , cilt.59, sa.2, ss.199-209, 2023 (ESCI)
Enzyme-free nickel electrochemical glucose sensor fabricated on pencil graphite electrode by electrodeposition Oskay K. O., Özkan B. Journal of Materials Science: Materials in Electronics , cilt.34, sa.7, 2023 (SCI-Expanded)
A comprehensive archaeometric analysis of a novel special organic finding in a glass unguentarium: NMR, FT-IR, SEM/EDX Pehlivan E., Yabaş E., Özer A. Journal of the Australian Ceramic Society , cilt.59, sa.4, ss.811-821, 2023 (SCI-Expanded)
POROUS POLYMER SCAFFOLDS DERIVED FROM BIORESOURCES FOR BIOMEDICAL APPLICATIONS Bohorquez-Moreno C. D., Öksüz K. E., Dinçer E. Cellulose Chemistry and Technology , cilt.57, sa.1-2, ss.107-116, 2023 (SCI-Expanded)
Sert Doku Uygulamaları İçin Makro Gözenekli Alüminyum Oksit-Bor Karbür Seramikleri Macro-Porous Aluminum Oxide-Boron Carbide Ceramics for Hard Tissue Applications Öksüz K. E. Recep Tayyip Erdoğan Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.4, sa.2, ss.65-75, 2023 (Hakemli Dergi)
Silk sericin-hydroxyapatite nanoribbons toward structurally stable osteogenic scaffolds Goksen Tosun N., Özer A., Bektas T., Öksüz K. E., Erden Tayhan S., Ozdemir T. Journal of the Australian Ceramic Society , cilt.59, sa.5, ss.1291-1301, 2023 (SCI-Expanded)
Phase variation and mechanical properties of waste calcium carbonate to substitute quartz in composite slab production Baş S., Güler T., Özer A., Aktürk S., Kriven W. M. International Journal of Applied Ceramic Technology , cilt.20, sa.6, ss.3677-3690, 2023 (SCI-Expanded)
Cost-Effective and Fast Fabrication of Copper–Cobalt Electrochemical Glucose Sensor Zeynalova A., OSKAY K. O. Journal of Electronic Materials , cilt.52, sa.10, ss.6791-6799, 2023 (SCI-Expanded)
New Dyestuff Production to Sensitively Determine the Sealing Capacity of the Implant Abutment Connection YABAŞ E., ŞİMŞİR M., Çetin M., Özaydın F. Cumhuriyet University , cilt.25, sa.2, ss.32-37, 2022 (Scopus, TRDizin)
Fabrication and Characterization of Mullite Reinforced CeO2 Added ZrO2 Ceramics HAFIZOĞLU M. A., AKKUŞ A., BOYRAZ T. Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online) , cilt.22, sa.5, ss.262-274, 2022 (TRDizin)
Investigation Of The Effect Of Vermiculite (Yıldızeli/Sivas) Addition On The Properties Of Sanitaryware Ceramic BOYRAZ T., ÖNEN U., TAPİK Ş. Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online) , cilt.5, sa.2, ss.632-642, 2022 (TRDizin)
New Records of Diatoms (Bacillariales, Rhopalodiales & Surirellales) with Ultrastructure Details from the Black Sea Coast of Turkey DİRİCAN S., KALELİ A., YILMAZ E., ÖZER A., DAYIOĞLU H. AQUATIC SCIENCES AND ENGINEERING , cilt.37, sa.1, ss.19-28, 2022 (ESCI, Scopus, TRDizin)
EFFECT OF CHEMICAL COMPOSITION OF BORIDING AGENT ON THE OPTIMIZATION OF SURFACE HARDNESS AND LAYER THICKNESS ON AISI 8620 STEEL BY SOLID AND LIQUID BORIDING PROCESSES Kul M., Yilmaz Y., Oskay K. O., Kumruoglu L. C. ADVANCES IN MATERIALS SCIENCE , cilt.22, sa.3, ss.14-22, 2022 (ESCI)
The effect of mullite addition on wear properties of titania doped zirconia ceramics HAFIZOĞLU M. A., BOYRAZ T., AKKUŞ A. Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi , cilt.12, sa.1, ss.43-50, 2022 (TRDizin)
Application of kaolinite-based composite as an adsorbent for removal of uranyl ions from aqueous solution: kinetics and equilibrium study Şenol Z. M., Keskin Z. S., Özer A., Şimşek S. Journal of Radioanalytical and Nuclear Chemistry , cilt.331, sa.1, ss.403-414, 2022 (SCI-Expanded, Scopus)
Effects of pH and Current Density on Microstructure and Hardness of the Cobalt-Tungsten Coating. OSKAY K. O. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi , cilt.9, sa.16, ss.69-77, 2022 (TRDizin)
Microstructure of Eobania vermiculata (Müller, 1774): SEM, F-TIR and XRD methods Öksüz K. E., Şereflişan H. Journal of agricultural production (Online) , cilt.3, sa.2, ss.42-47, 2022 (Hakemli Dergi)
Synthesis and characterization of chitosan-vermiculite-lignin ternary composite as an adsorbent for effective removal of uranyl ions from aqueous solution: Experimental and theoretical analyses. Şenol Z. M., Kaya S., Şimşek S., Katin K. P., Özer A., Marzouki R. International journal of biological macromolecules , cilt.209, sa.A, ss.1234-1247, 2022 (SCI-Expanded, Scopus)
Improving the Electrochemical Energy Storage Capacity of the Renewable Carbon Derived from Industrial Tea Waste Karamustafa A., Sozer S., OSKAY K. O., Buldu-Akturk M., Erdem E., AKGÜL G. RUSSIAN JOURNAL OF ELECTROCHEMISTRY , cilt.58, sa.9, ss.844-854, 2022 (SCI-Expanded)
Theoretical and experimental insights about the adsorption of uranyl ion on a new designed Vermiculite-Polymer composite Şimşek S., Kaya S., Mine Şenol Z. M., Ulusoy H. İ., Katin K., Özer A., et al. Journal of Molecular Liquids , cilt.352, 2022 (SCI-Expanded, Scopus)
The Effect of Mullite Addition on Wear Properties of SiO2 Doped ZrO2 Ceramics HAFIZOĞLU M. A., BOYRAZ T., AKKUŞ A. CUMHURIYET SCIENCE JOURNAL , cilt.43, sa.2, ss.257-265, 2022 (Hakemli Dergi)
First-time evaluation and characterization of “Šarišša” mudbrick ceramics and findings by SEM–EDX and XRF: chasing the traces of fire Pehlivan E., Ozer S. A., Pehlivan G. F., Özer A. Journal of the Australian Ceramic Society , cilt.58, sa.1, ss.49-62, 2022 (SCI-Expanded)
Preparation and characterization of nanosized Fe3O4-biochar electrocatalysts with large surface area for H2O2 sensing ATEŞ A., OSKAY K. O. SURFACES AND INTERFACES , cilt.29, 2022 (SCI-Expanded)
High-Performance Material for the Effective Removal of Uranyl Ion from Solution: Computationally Supported Experimental Studies Şimşek S., Derin Y., Kaya S., Şenol Z. M., Katin K. P., Özer A. LANGMUIR , cilt.1, sa.1, ss.1-16, 2022 (SCI-Expanded)
Gallium oxide films deposition by RF magnetron sputtering; a detailed analysis on the effects of deposition pressure and sputtering power and annealing Mobtakeri S., Akaltun Y., Özer A., Kılıç M., Şenadım Tüzemen E., Gür E. Ceramics International , cilt.47, sa.2, ss.1721-1727, 2021 (SCI-Expanded, Scopus)
REVIEW: COMPARISON OF ULTRASONICALLY AIDED ZINC BENEFICIATION BY MECHANICAL FLOTATION AND COLUMN FLOTATION CELL Ulusoy U., Kurşun H. EUREKA: PHYSICS AND ENGINEERING , cilt.2021, sa.1, ss.3-13, 2021 (Scopus)
ZnO/Al2O3 layered structures deposited by RF magnetron sputtering on glass: growth characteristics, optical properties, and microstructural analysis ŞENADIM TÜZEMEN E., ÖZER A., DEMİR İ., ALTUNTAŞ İ., ŞİMŞİR M. JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.57, sa.5, ss.1379-1388, 2021 (SCI-Expanded, Scopus)
Investigation of wear properties of mullite and aluminium titanate added porcelain ceramics Boyraz T., AKKUŞ A. JOURNAL OF CERAMIC PROCESSING RESEARCH , cilt.22, sa.2, ss.226-231, 2021 (SCI-Expanded, Scopus)
Effects of Antimony Doping and Sintering Atmosphere on the Properties of K4CuNb8O23 Modified K0.5Na0.5NbO3 (KNN-KCN) Lead-free Piezoceramics MURUTOĞLU M., AKÇA E., YILMAZ H. Seramik - Journal of the Turkish Ceramics Society , cilt.1, sa.2, ss.33-39, 2021 (Hakemli Dergi)
Fabrication and Characterization of Mullite Reinforced Y2O3 Added ZrO2 Ceramics HAFIZOĞLU M. A., BOYRAZ T., AKKUŞ A. Open Journal of Nano , cilt.6, sa.2, ss.28-40, 2021 (Hakemli Dergi)
Optimisation of recycled moulding sand composition using the mixture design method Kul M., Akgul B., Koskay K. O., Alsan A. E., Karaca B. International Journal of Cast Metals Research , cilt.34, sa.2, ss.104-109, 2021 (SCI-Expanded, Scopus)
The role of Nb2O5 polymorphs on processing-structure-property relationship in lead-based perovskite 0.5Pb(Yb1/2Nb1/2)O-3-0.5PbTiO(3) piezoceramics AKÇA E., Unveroglu B., Tatar I., Duran C. MATERIALIA , cilt.20, 2021 (ESCI, Scopus)
Fabrication and Characterization of Mullite Reinforced CaO Added ZrO2 Ceramics HAFIZOĞLU M. A., AKKUŞ A., BOYRAZ T. European Journal of Science and Technology , sa.28, ss.1137-1143, 2021 (Hakemli Dergi)
Novel natural spider silk embedded electrospun nanofiber mats for wound healing Öksüz K. E., Özkaya N. K., İnan Z. D. Ş., Özer A. Materials Today Communications , cilt.26, 2021 (SCI-Expanded)
Synthesis and characterization of chitosan–vermiculite composite beads for removal of uranyl ions: isotherm, kinetics and thermodynamics studies Şenol Z. M., Şimşek S., Özer A., Şenol Arslan D. Journal of Radioanalytical and Nuclear Chemistry , cilt.327, sa.1, ss.159-173, 2021 (SCI-Expanded, Scopus)
Fabrication of Mullite Reinforced Y2O3 Added ZrO2 Ceramics and Characterization of These Composites HAFIZOĞLU M. A., BOYRAZ T., AKKUŞ A. Open Journal of Nano , cilt.6, sa.2, ss.28-40, 2021 (Hakemli Dergi)
Templated grain growth of Bi(Zn0.5Zr0.5)O-3 modified BiScO3-PbTiO3 piezoelectric ceramics for high temperature applications Akça E., Duran C., Kowalski B., Sehirlioglu A. JOURNAL OF ASIAN CERAMIC SOCIETIES , cilt.9, sa.3, ss.874-881, 2021 (SCI-Expanded)
A comparative study of hardness/scratch/wear properties of TiCN and TiAlN Coatings on DIN 1.2842 Steel by CA-PVD Method Şimşir M., Palacı Y., Özer A. JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.58, ss.1-7, 2021 (SCI-Expanded)
An investigation of corrosive effects on zirconia with different crystal structures Soygun K., Özer A., Bolayır G., Ulucan M. Ç. Microscopy Research And Technique , cilt.1, ss.1-7, 2021 (SCI-Expanded)
Sürtünme Karıştırma Kaynağı ile Birleştirilen AISI 316 Paslanmaz Çelik ve Karbonlu Çelik Çiftlerinin Mekanik Özelliklerinin ve Mikroyapılarının İncelenmesi ALNAK Y., ÖZER A., SAVAŞ V. Çukurova Üniversitesi Mühendislik Fakültesi dergisi , cilt.36, sa.3, ss.719-733, 2021 (Hakemli Dergi)
MIDDLE BRONZE AGE VITREOUS MATERIAL OF OYLUM HÖYÜK AND NEW FINDINGS Engin A., Atik Ş., Özer A. Annales 2021 , cilt.21, ss.35-48, 2021 (Düzenli olarak gerçekleştirilen hakemli kongrenin bildiri kitabı)
EVALUATION OF THE MICROHARDNESS OF DIFFERENT RESIN-BASED DENTAL RESTORATIVE MATERIALS TREATED WITH GASTRIC ACID: SEM-EDX ANALYSIS Ünal M., Candan M., İpek İ., Küçükoflaz M., Özer A. Microscopy Research And Technique , cilt.85, ss.1-8, 2021 (SCI-Expanded)
Fabrication and Characterization of Mullite Reinforced MgO Added ZrO2 Ceramics HAFIZOĞLU M. A., BOYRAZ T., AKKUŞ A. European Journal of Science and Technology , sa.28, 2021 (Hakemli Dergi)
A Novel and Eco-friendly Approach for the Simultaneous Recovery of Copper and Diamond from Waste Cutting Segments via Electrodissolution/Deposition Kul M., Erden F., OSKAY K. O., Karasungur O., ŞİMŞİR M., Kumruoglu L. C., et al. JOURNAL OF SUSTAINABLE METALLURGY , cilt.7, sa.3, ss.1224-1240, 2021 (SCI-Expanded)
Investigation of nitrogen doped ZnO thin films: Effects on their structural and optical properties Hopoğlu H., Aydınoğlu H. S., Özer A., Şenadım Tüzemen E. Optical Materials , cilt.122, sa.PART A, ss.111685, 2021 (SCI-Expanded)
Removal of food dyes from aqueous solution by chitosan-vermiculite beads Şenol Z. M., Gürsoy N., Şimşek S., Özer A., Karakuş N. International Journal of Biological Macromolecules , cilt.148, ss.635-646, 2020 (SCI-Expanded, Scopus)
Effect of process parameters on the electrodeposition of zinc on 1010 Steel: Central composite design optimization Kul M., OSKAY K. O., Erden F., AKÇA E., Katirci R., Köksal E., et al. International Journal of Electrochemical Science , cilt.15, ss.9779-9795, 2020 (SCI-Expanded)
Characterization of gallium oxide/glass thin films grown by RF magnetron sputtering Mobtakeri S., Şenadım Tüzemen E., Özer A., Gür E. Cumhuriyet Science Journal , cilt.41, sa.4, ss.929-937, 2020 (Hakemli Dergi)
Synthesis and characterization of a polyacrylamide-dolomite based new composite material for efficient removal of uranyl ions Senol Z. M., Şimşek S., Ulusoy H. İ., Özer A. JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY , cilt.324, ss.317-330, 2020 (SCI-Expanded, Scopus)
Effect of Composition and Sintering Temperature on the Structure and Properties of Porous Bioactive Glass Scaffolds Öksüz K. E. CHIANG MAI JOURNAL OF SCIENCE , cilt.46, ss.568-578, 2019 (SCI-Expanded, Scopus)
The Effects of Austempering Heat Treatment on the Mechanical Properties of Heavy Vehicles Camshaft made of Different Analysis Ductile Cast Iron Karaca B., ŞİMŞİR M. ACTA PHYSICA POLONICA A , cilt.135, sa.4, ss.804-810, 2019 (SCI-Expanded, Scopus)
Processing and characterization of porous SiC/NiTi alloys for biomedical applications Şimşir M., Akkan H., Öksüz K. E. KOVOVE MATERIALY-METALLIC MATERIALS , cilt.57, ss.363-369, 2019 (SCI-Expanded, Scopus)
Structural and mechanical characterization of mullite and aluminium titanate reinforced yttria stabilized zirconia ceramic composites Kucuk I., BOYRAZ T. JOURNAL OF CERAMIC PROCESSING RESEARCH , cilt.20, sa.1, ss.73-79, 2019 (SCI-Expanded, Scopus)
Lead-free potassium sodium niobate piezoceramics for high-power ultrasonic cutting application: Modelling and prototyping AKÇA E., YILMAZ H. PROCESSING AND APPLICATION OF CERAMICS , cilt.13, sa.1, ss.65-78, 2019 (SCI-Expanded, Scopus)
The Effects of Heat Treatment on the Tensile Properties of Camshaft made of GGG70 Series Spherical Graphite Cast Iron Karaca B., ŞİMŞİR M. ACTA PHYSICA POLONICA A , cilt.135, sa.4, ss.811-818, 2019 (SCI-Expanded)
The effect of yttrium oxide in hydroxyapatite/aluminum oxide hybrid biocomposite materials: Phase, mechanical and morphological evaluationDer Einfluss von Yttriumoxid in Hydroxylapatit/Aluminiumoxid hybriden Bioverbundwerkstoffen: Gefuge, mechanische und morphologische Evaluation Özer A., Öksüz K. E. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , cilt.50, ss.1382-1390, 2019 (SCI-Expanded)
Effect of Calcination on Microstructure Development and Properties of Hydroxyapatite Powders Extracted from Human and Bovine Bones Öksüz K. E., Kılınç S., Özer A. TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY , cilt.78, ss.41-45, 2019 (SCI-Expanded)
Fabrication and characterization of aluminium titanate and mullite added Porcelain ceramics AKKUŞ A., BOYRAZ T. JOURNAL OF CERAMIC PROCESSING RESEARCH , cilt.20, sa.1, ss.54-58, 2019 (SCI-Expanded)
Effects of Molybdenum and Boron Additions of Fe-Based Metal Matrix Composites by Warm Compaction Method Gun T., ŞİMŞİR M. ACTA PHYSICA POLONICA A , cilt.135, sa.4, ss.819-824, 2019 (SCI-Expanded)
The Effect of Ball Milling Speed on the Penetration of Cr And Zr into Cu for Production of Cu1CrZr Alloy Powder Kul M., Özer A., Öksüz K. E., Kurt N. International Scientific Journal Machines. Technologies. Materials. , cilt.13, sa.8, ss.362-366, 2019 (Hakemli Dergi)
Using of Metal Coated Diamond by Polymeric Binder in Design of Segment Used in Natural Stone Sawing Process Sübütay H., Şimşir M. International Journal of Innovative Engineering Applications , cilt.3, sa.1, ss.1-8, 2019 (Hakemli Dergi)
RADIATION ATTENUATION PROPERTIES OF ALUMINUM TITANATE-SPINEL COMPOSITES FOR CO-60 GAMMA SOURCE Görkem Ç., TUĞRUL A. B., ÖNEN U., BOYRAZ T., BÜYÜK B. Materials Methods and Technologies , sa.13, ss.145-152, 2019 (Hakemli Dergi)
Vermikülit (Yıldızeli/ Sivas) İlavesinin Seramik Porselenin Özellikleri Üzerinde Etkisinin Araştırılması TAPİK Ş., ÖNEN U., BOYRAZ T. AKU J. Sci. Eng. , sa.19, ss.513-520, 2019 (Hakemli Dergi)
Radıatıon Attenuatıon Propertıes Of Alumınum Tıtanate-Spınel, Composıtes For Co-60 Gamma Source ÇEVİKBAŞ G., TUĞRUL A. B., ÖNEN U., BOYRAZ T., BÜYÜK B. Materials, Methods Technologies , sa.13, ss.145-152, 2019 (Hakemli Dergi)
Thermal Properties and Microstructural Characterization of Aluminium Titanate (Al2TiO5) / La2O3 -Stabilized Zirconia (ZrO2 ) ) Ceramics BOYRAZ T. Cumhuriyet Science Journal , cilt.39, sa.1, ss.243-249, 2018 (TRDizin)
An Oxidation Study of NiCoCrAl Coatings Produced by Electrolytic co-Deposition Method Oskay K. O., Demirel B. ACTA PHYSICA POLONICA A , cilt.134, ss.186-188, 2018 (SCI-Expanded, Scopus)
The surface and phase analysis studies on dental bioceramics subjected to different mouthrinse solutions Özer A., Soygun K., Bolayır G. JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.54, ss.475-481, 2018 (SCI-Expanded, Scopus)
Microstructural evaluation and cytotoxicity investigations of α-Al2O3 bone replacement materials ÖZER A. Cumhuriyet Tıp Dergisi , cilt.40, sa.2, ss.135-141, 2018 (TRDizin)
Thermomechanical properties of aluminium titanate (Al2TiO5)-reinforced forsterite (Mg2SiO4) ceramic composites Kucuk I., BOYRAZ T., Gokce H., Öveçoğlu M. L. CERAMICS INTERNATIONAL , cilt.44, sa.7, ss.8277-8282, 2018 (SCI-Expanded)
OPTIMIZING THE COMPOSITION OF ELECTROPLATED NiCrAl COMPOSITE COATING Oskay K. O., Demirel B. SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , cilt.36, ss.795-802, 2018 (Hakemli Dergi)
Investigations on Microstructural and Raman Scattering Properties of B2O3 Doped Ba(Ti1-xZrx)O3 Ceramics Öksüz K. E., Şen Ş., Şen U. Chemistry Research Journal , cilt.3, sa.6, ss.71-75, 2018 (Hakemli Dergi)
Optimization of Electrophoretic Deposition of YSZ Oskay K. O., Demirel B. ACTA PHYSICA POLONICA A , cilt.134, ss.182-185, 2018 (SCI-Expanded)
Investigation of wear properties of CaO, MgO added stabilized zirconia ceramics produced by different pressing methods AKKUŞ A., BOYRAZ T. JOURNAL OF CERAMIC PROCESSING RESEARCH , cilt.19, sa.3, ss.249-252, 2018 (SCI-Expanded)
Properties of Nano Hydroxyapatite Powder Derived From Human Teeth Öksüz K. E. Chemistry Research Journal , cilt.3, sa.6, ss.76-81, 2018 (Hakemli Dergi)
Optimization of Molding Unused New Sand Composition by Mixture Design Method Kul M., Oskay K. O., Akça E., Alsan A. E., Karaca B. Cumhuriyet Science Journal , cilt.39, sa.2, ss.512-523, 2018 (Hakemli Dergi)
Influence of ZrO2 Addition on the Structure and Dielectric Properties of BaTiO3 Ceramics Öksüz K. E., Şen Ş., Şen U. ACTA PHYSICA POLONICA A , cilt.131, ss.197-199, 2017 (SCI-Expanded, Scopus)
Processing and characterization of < 001 >-textured Pb(Mg1/3Nb2/3)O-3-Pb(Yb1/2Nb1/2)O-3-PbTiO3 ceramics DURAN C., Cengiz S., Ecebas N., Dursun S., AKÇA E. JOURNAL OF MATERIALS RESEARCH , cilt.32, sa.13, ss.2471-2478, 2017 (SCI-Expanded, Scopus)
MICROSTRUCTURAL CHARACTERISATION OF Co-Cr-Mo CASTING DENTAL ALLOYS Szala M., Beer-Lech K., Gancarczyk K., Kilic O. B., Pedrak P., ÖZER A., et al. ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL , cilt.11, sa.4, ss.76-82, 2017 (ESCI)
Investigations on the effects of mouthrinses on the colour stability and surface roughness of different dental bioceramics Soygun K., Varol O., Özer A., Bolayır G. JOURNAL OF ADVANCED PROSTHODONTICS , cilt.9, ss.200-207, 2017 (SCI-Expanded, Scopus)
Formation of Al-Ti-B Phases For Grain Refinement Of Al Alloys Produced By High Energy Ball Milling Arıkoğlu M., APAYDIN F., ÖZER A. Material Science Forum , sa.907, ss.188-192, 2017 (Scopus)
Effect of Yttria on the Phase Formation and Sintering of HA-Al2O3 Biocomposites Öksüz K. E., Özer A. ACTA PHYSICA POLONICA A , cilt.131, ss.576-579, 2017 (SCI-Expanded)
Effect of Austempering Heat Treatment on the Tensile Properties of CamShaft Made of Ductile Cast Iron Karaca B., ŞİMŞİR M. International Refereed Journal of Engineering and Science , cilt.6, sa.11, ss.16-22, 2017 (Hakemli Dergi)
MICROSTRUCTURAL AND PHASE STUDY OF Y2O3 DOPED HYDROXYAPATITE/Al2O3 BIOCOMPOSITES Öksüz K. E., Özer A. DIGEST JOURNAL OF NANOMATERIALS AND BIOSTRUCTURES , cilt.11, ss.167-172, 2016 (SCI-Expanded, Scopus)
Effect of induction hardening of Fe-C-Ni-Cu-Mo-B metal matrix composites by powder metallurgy for gear production Gün T., ŞİMŞİR M., Özaydın F. Journal of Achivements in Materials and Manufacturing Engineering , cilt.79, sa.2, ss.49-53, 2016 (Hakemli Dergi)
Tribological behavior of Al2O3 and B4C particle-reinforced copper matrix investigated by the Taguchi method Şahin Y., Öksüz K. E. MATERIALS TESTING , cilt.58, ss.453-461, 2016 (SCI-Expanded, Scopus)
Investigating the effect of testing parameters on adhesive wear using Taguchi method ŞİMŞİR M., SELÇUK B., ASLAN N. Advances in Materials and Processing Technologies , cilt.1, ss.493-507, 2016 (Scopus)
Effect of chill formation on the mechanical properties and microstructure of grey and nodular cast irons used in automotive industry Subutay H., ŞİMŞİR M., Aydin M., Karaca B. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.22, sa.1, ss.1-7, 2016 (ESCI)
Microstructure and Hardness Characteristics of Al2O3-B4C Particle-Reinforced Cu Matrix Composites Öksüz K. E., Şahin Y. ACTA PHYSICA POLONICA A , cilt.129, ss.650-652, 2016 (SCI-Expanded)
Effect of boronizing composition on boride layer of boronized GGG-60 ductile cast iron Kul M., Oskay K. O., Temizkana A., Karaca B., Kumruoglu L. C., Topcu B. VACUUM , cilt.126, ss.80-83, 2016 (SCI-Expanded)
Effects of Different Curing Unites on Bulk Fill Composites SOYGUN K., ÜNAL M., ÖZER A., GÜLNAHAR E., BOLAYIR G. international journal of oral and dental health , cilt.1, sa.3, ss.1-5, 2015 (Hakemli Dergi)
Effects of B2O3 Addition on the Sintering Behavior of 0-5-10% ZrO2 Doped BaTiO3 Based Ceramics Öksüz K. E., Şen Ş., Şen U. ACTA PHYSICA POLONICA A , cilt.127, ss.1086-1089, 2015 (SCI-Expanded, Scopus)
Ballistic Performance of Kevlar49/ UHMW-PEHB26 Hybrid Layered-Composite Yavaş M. O., AVCI A., ŞİMŞİR M., AKDEMİR A. Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi , cilt.7, sa.4, ss.21-27, 2015 (TRDizin)
Microstructural characterization and thermal properties of aluminium titanate/talc ceramic matrix composites Ozsoy E., Onen U., Boyraz T. Acta Physica Polonica A , cilt.127, sa.4, ss.1136-1138, 2015 (SCI-Expanded, Scopus)
Investigation of thermal stress in different metal-ceramic restorations by mathematical analysis COŞKUN M. E., BOYRAZ T., TUĞUT F., AKIN H. Cumhuriyet Dental Journal , cilt.18, sa.4, ss.311-317, 2015 (Scopus, TRDizin)
Investigation of Thermal Stress In Different Metal Based Dental Restorations By Mathematical Analysis COŞKUN M. E., BOYRAZ T., TUĞUT F., AKIN H. cumhuriyet dental journal , cilt.18, sa.4, ss.311-317, 2015 (Scopus, TRDizin)
Effects of B2O3 addition on the sintering behavior of 0-5-10% ZrO2 doped BaTiO3 based ceramics ÖKSÜZ K. E., Şen Ş., Şen U. Acta Physica Polonica A , cilt.127, sa.4, ss.1086-1089, 2015 (SCI-Expanded)
An investigation of aluminum titanate spinel composites behavior in radiation ÇEVİKBAŞ G., TUĞRUL A. S. B., ÖNEN U., BOYRAZ T., BÜYÜK B. AIP Conference Proceedings , cilt.1653, ss.20029, 2015 (Scopus)
Optimization of selective leaching of Zn from electric arc furnace steelmaking dust using response surface methodology Kul M., Oskay K. O., Şimşir M., Subutay H., Kirgezen H. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.25, ss.2753-2762, 2015 (SCI-Expanded)
Optimizing the recovery of copper from electroplating rinse bath solution by hollow fiber membrane Oskay K. O., Kul M. WATER SCIENCE AND TECHNOLOGY , cilt.72, ss.52-62, 2015 (SCI-Expanded)
Separation and recovery of valuable metals from real mix electroplating wastewater by solvent extraction KUL M., OSKAY K. O. HYDROMETALLURGY , cilt.155, ss.153-160, 2015 (SCI-Expanded)
Microstructural evaluation and characterization of solid-state reaction of B2O3 doped BaZrxTi1-xO3 ceramics Öksüz K. E., Şen Ş., Şen U. JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.51, ss.137-143, 2015 (SCI-Expanded)
Processing and Mechanical Properties of B4C/Diamond Impregnated Fe/Co MMC Öksüz K. E., Şimşir M. ACTA PHYSICA POLONICA A , cilt.127, sa.4, ss.1139-1141, 2015 (SCI-Expanded)
The Effects of Aging on the Hardness and Wear Behaviour of 2124 Al Alloy/B4C Composites Öksüz K. E., Oskay K. O. ACTA PHYSICA POLONICA A , cilt.127, ss.1367-1369, 2015 (SCI-Expanded)
Microstructural characterization and thermal properties of aluminium titanate/porcelain ceramic matrix composites Sacli M., Onen U., Boyraz T. Acta Physica Polonica A , cilt.127, sa.4, ss.1133-1135, 2015 (SCI-Expanded)
An investigation of microhardness cured different flow bulk fill composites Farkli akişkan bulk fill kompozitlerin mikrosertliklerinin araştirilmasi SOYGUN K., ÜNAL M., ÖZER A., GÜLNAHAR E., BOLAYIR G. CUMHURİYET DENTAL JOURNAL , cilt.17, sa.1, ss.64-69, 2014 (Scopus, TRDizin)
ÇİMENTO İLE YER DEĞİŞTİREBİLİR SERAMİK YAPILARIN MALZEMELERİN FAZ OLUŞUMU ve MUKAVEMETE ETKİSİ ÖZER A., ŞAHBUDAK K. Cumhuriyet Yer Bilimleri Dergisi , cilt.32, ss.5-13, 2014 (TRDizin)
Effects of Al2O3 Nanopowders on the Wear Behavior of NiTi Shape Memory Alloys Şahin Y., Öksüz K. E. JOM , cilt.66, ss.61-65, 2014 (SCI-Expanded)
Farklı akışkan bulk fill kompozitlerin mikrosertliklerinin araştırılması SOYGUN K., ÜNAL M., ÖZER A., GÜLNAHAR E., BOLAYIR G. Cumhuriyet Dental Journal , cilt.17, sa.1, ss.64-69, 2014 (Scopus)
Investigation on the machinability of steel/steel laminates by CO2 laser ŞİMŞİR M., ÖZER A., KUMRUOĞLU L. C. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY , cilt.48, ss.80-94, 2014 (SCI-Expanded)
Microstructural Characterization and Thermal Properties of Aluminium Titanate/YSZ Ceramics Citak E., Boyraz T. ACTA PHYSICA POLONICA A , cilt.125, sa.2, ss.465-468, 2014 (SCI-Expanded)
Microstructural Characterization and Thermal Properties of Aluminium Titanate/Spinel Ceramic Matrix Composites Onen U., Boyraz T. ACTA PHYSICA POLONICA A , cilt.125, sa.2, ss.488-490, 2014 (SCI-Expanded)
Tetragonal Zirkonya Katkılı Cr3C2-NiCr Sermet KompozitlerinKarakterizasyonu ve Mekanik Özellikleri ÖZER A., TÜR Y. K. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.14, ss.375-180, 2014 (Hakemli Dergi)
IMPACT OF OVALBUMIN ON PYRITE FLOTATION IN THE ABSENCE AND PRESENCE OF METAL IONS GÜLER T., ŞAHBUDAK K., AKDEMİR Ü., ÇETİNKAYA S. PHYSICOCHEMICAL PROBLEMS OF MINERAL PROCESSING , cilt.50, sa.1, ss.31-40, 2014 (SCI-Expanded)
TRIBOLOGICAL BEHAVIOUR OF Al2014-Al2O3 PARTICLE-REINFORCED COMPOSITES PRODUCED BY POWDER METALLURGY METHOD Şahin Y., Öksüz K. E. JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION , cilt.19, ss.190-201, 2013 (SCI-Expanded, Scopus)
ABRASIVE WEAR BEHAVIOUR OF SiCp-REINFORCED Al2124 ALLOY COMPOSITE BASED ON THE TAGUCHI METHOD Şahin Y., Öksüz K. E. JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION , cilt.19, ss.520-538, 2013 (SCI-Expanded, Scopus)
Electrochemical study of pyrite-ovalbumin interaction in relation to flotation GÜLER T., ŞAHBUDAK K., ÇETİNKAYA S., AKDEMİR Ü. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.23, sa.9, ss.2766-2775, 2013 (SCI-Expanded)
Effects of sintering temperature and addition of Fe and B4C on hardness and wear resistance of diamond reinforced metal matrix composites Şimşir M., Öksüz K. E. JOURNAL OF SUPERHARD MATERIALS , cilt.35, sa.6, ss.369-382, 2013 (SCI-Expanded)
Influence of Entertainment on the Grade and Recovery in Column Flotation KURŞUN H., DURAN Z., AKÇİÇEK N., TONUS E. M., KILINÇ T., ÇİFTÇİ M. Scientific Mining Journal , cilt.52, ss.21-32, 2013 (Scopus)
Dental Restorasyonlarda (Kaplama, Dolgu, Kuron) Kullanılan Ticari Lityum Disilikat Cam-Seramiklerinin Üretimi ve Karakterizasyonu ERTUĞ B., SADULLAHOĞLU G., BOYRAZ T. Metal Dünyası , sa.235, 2013 (Hakemli Dergi)
Investigation of Mechanical Properties and Microstructure of AA2024 and AA7075 ÖKSÜZ K. E., BAĞIROV H., ŞİMŞİR M., Ceyhun K., Aykut Ö., YZ D., et al. Applied Mechanics and Materials , cilt.390, ss.547-551, 2013 (Scopus)
Sintering behaviour and mechanical properties of Cr3C2-NiCr cermets Ozer A., Tur Y. K. BULLETIN OF MATERIALS SCIENCE , cilt.36, sa.5, ss.907-911, 2013 (SCI-Expanded)
The Characterization of The Mechanical And Thermal Properties Of Hot Pressed Hexagonal Boron Nitride Titanium Diboride Composites AKARSU A. C., GÖKÇE H., BOYRAZ T., ERTUĞ B., SADULLAHOĞLU G., ADDEMİR A. O., et al. Journal of Trends Chemistry , cilt.3, sa.1, ss.6-11, 2012 (Hakemli Dergi)
Microstructural and mechanical properties of hot-pressed (B4C, SiC)/TiB2 Composites Akarsu A. C., Gökfe H., Ertug B., Addemir A. O., Övejoglu M. L., Boyraz T. CFI Ceramic Forum International , cilt.89, 2012 (SCI-Expanded, Scopus)
Response time and stability characteristics of pmma-containing barium titanate sensors ERTUĞ B., BOYRAZ T., ADDEMİR O. Special Topics Reviews in Porous Media , cilt.3, sa.3, ss.271-280, 2012 (Scopus)
Statistical evaluation of flotation and entrainment behavior of an artificial ore GÜLER T., AKDEMİR Ü. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.22, sa.1, ss.199-205, 2012 (SCI-Expanded)
The effect of 3 mol% Y2O3 stabilized ZrO2 produced by a steric entrapment method on the mechanical and sintering properties of Cr3C2 based cermets Ozer A., Kriven W. M., Tur Y. K. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.556, ss.878-884, 2012 (SCI-Expanded)
Investigation of the tensile properties of continuous steel wire-reinforced gray cast iron composite Akdemir A., KUŞ R., ŞİMŞİR M. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.528, ss.3897-3904, 2011 (SCI-Expanded)
Characterization of microstructural and thermal properties of steatite/cordierite ceramics prepared by using natural raw materials Gokce H., Ağaoğulları D., Öveçoğlu M. L., Duman I., Boyraz T. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY , cilt.31, sa.14, ss.2741-2747, 2011 (SCI-Expanded)
Humidity sensitivity characteristics of BaTiO3 ceramics with PMMA additive at various working temperatures Ertug B., BOYRAZ T., Addemir O. JOURNAL OF CERAMIC PROCESSING RESEARCH , cilt.11, sa.4, ss.443-447, 2010 (SCI-Expanded, Scopus)
Sıcak Şekillendirilmiş ZrO2 Seramiklerde Bağlayıcı Giderme ve Karakterizasyon BOYRAZ T., ADDEMİR O. İTÜ dergisi/d , cilt.9, sa.2, 2010 (TRDizin)
Impact toughness and microstructure of continuous steel wire-reinforced cast iron composite Akdemir A., KUŞ R., ŞİMŞİR M. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.516, ss.119-125, 2009 (SCI-Expanded, Scopus)
An investigation into stainless-steel/structural-alloy-steel bimetal produced by shell mould casting ŞİMŞİR M., KUMRUOĞLU L. C., ÖZER A. MATERIALS & DESIGN , cilt.30, sa.2, ss.264-270, 2009 (SCI-Expanded, Scopus)
Mechanical and microstructural properties of low-carbon steel-plate-reinforced gray cast iron AVCI A., Ilkaya N., ŞİMŞİR M., Akdemir A. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.209, sa.3, ss.1410-1416, 2009 (SCI-Expanded, Scopus)
Effect of heat treatment on fracture behavior of steel-wire-reinforced gray cast iron Simsir M. INTERNATIONAL JOURNAL OF FRACTURE , cilt.151, sa.2, ss.121-133, 2008 (SCI-Expanded)
Fracture behavior and microstructure of steel fiber reinforced cast iron Simsir M. JOURNAL OF MATERIALS SCIENCE , cilt.42, sa.16, ss.6701-6707, 2007 (SCI-Expanded)
Modelling of Fracture Toughness in Steel Laminates with Finite Element Method ŞİMŞİR M., ÖZTÜRK T., Mustafa D. Turkish Journal of Engineering & Environmental Sciences , cilt.29, sa.1, ss.41-50, 2005 (Hakemli Dergi)
Makinelerde Güç İletim Mekanizmalarının Bilgisayar Destekli Modelinin Oluşturulması-III Bulut S., Bakşiyev İ., Kocabıyık T. Endüstri ve Otomasyon , sa.98, ss.28-32, 2005 (Hakemli Dergi)
Investigation of the Fracture Behavior of Steel Steel Laminates in Crack Divider Orientation ŞİMŞİR M., ÖZTÜRK T., Mustafa D. Turkish Journal of Engineering & Environmental Sciences , cilt.28, sa.6, ss.397-404, 2004 (Hakemli Dergi)
SİVAS KİREÇ FABRİKASINA YÖNELİK ALTERNATİF HAMMADDEKAYNAKLARININ DEĞERLENDİRİLMESİ SÜL Ö. L., KAHRİMAN A., DEMİRCİ A., CEBECİ Y., BOYRAZ T. Madencilik , cilt.35, sa.2, ss.41-46, 1996 (Hakemli Dergi)
Alumina-Zirkonya-GRAFEN TABAKALI KOMPOZİTLERİN KARAKTERİZASYONU ÖZER A., İŞLEK M. S., SARIOĞLU CEBECİ M. LAMBERT ACADEMIC PUBLISHING GmbH, Co., 2017
Challenges and toxicity assessment of sericin materials in bio-based applications Öksüz K. E. Science and Technology of Silkworm Sericin, Maria Hanna J.,Mathew Sneha Sabu,Rajkhowa Rangam,Thomas Sabu, Editör, Elsevier, Mumbai, ss.491-513, 2025
Application Of Adaptive Neuro-Fuzzy Inference Systems (Anfis) For The Predictive Modeling Of Debinding Behavior In Pressureless Hot Formed Zirconia Ceramics YÜKSEK A. G., BOYRAZ T. Artificial Intelligence: Foundations, Applications and Future Directions, YÜKSEK AHMET GÜRKAN, AKKOYUN SERKAN, Editör, Livre de Lyon, Lyon, ss.279-302, 2025
PREDICTIVE MODELLING OF WEAR PROPERTIES OF CAO AND MGO DOPED STABILIZED ZIRCONIA CERAMICS WITH DIFFERENT MACHINE LEARNING ALGORITHMS Yüksek A. G., Boyraz T., Akkuş A. Modern Research in Engineering Sciences-2024, Halil İbrahim Kurt,Duygu Kavak, Editör, Livre de Lyon, Lyon, ss.1-33, 2024
Mathematical Thermal Stress Analysis in Metal-Ceramic and Ceramic-Ceramic Coatings Boyraz T. POPULAR APPROACHES TO ENGINEERING, Mehmet Sait CENGİZ, Editör, Duvar yayınları, İzmir, ss.47-62, 2024
COMPARISON OF RANDOM FOREST AND ARTIFICIAL NEURAL NETWORKS FOR PREDICTIVE MODELLING OF DEBINDING BEHAVIOUR OF PRESSURELESS HOT FORMED ZIRCONIA CERAMICS Yüksek A. G., Boyraz T. Research and Findings in Engineering Sciences-2024, BOZKURT ÖMER YAVUZ,ERGÜL ENGİN, Editör, Livre de Lyon, Lyon, ss.67-88, 2024
Adaptive Neuro Fuzzy Inference Systems (ANFIS) and Application to Wear Prediction of Porcelain Ceramics Boyraz T. POPULAR APPROACHES TO ENGINEERING, Mehmet Sait CENGİZ, Editör, Duvar Yayınları, İzmir, ss.23-46, 2024
BÖLÜM 5 ULTRASONİK NANOKRİSTAL YÜZEY MODİFİKASYONU (UNYM) YÖNTEMİ VE GÜNCEL GELİŞMELER SELÇUK E., ŞİMŞİR M. FEN VE MÜHENDİSLİKTE GÜNCEL ARAŞTIRMALAR VE UYGULAMALARI, Prof. Dr. Mehmet ŞİMŞİR Prof. Dr. Salim Cem İNAN Doç. Dr. Sayiter YILDIZ Doç. Dr. Ebru YABAŞ, Editör, İksad Yayınevi, ss.93-113, 2023
Biocomposites: Advances in Research and Applications Chapter 6. Dental Bioceramics: From Lab to Clinical Practice Öksüz K. E. Biocomposites: Advances in Research and Applications, James R. Bush, Editör, Nova Science Publishers, Inc., New York, ss.227-246, 2023
CHAPTER 7 PARAMETERS AFFECTING MICRO ARC OXIDATION PROCESS, BIOCOMPATIBILITY AND PARTICLE ADDITION Ünlüses K., ŞİMŞİR M., YABAŞ E. Current Research From Science to Technology, Prof. Dr. Mehmet ŞİMŞİR Prof. Dr. Salim Cem İNAN Assoc. Prof. Dr. Sayiter YILDIZ Assoc. Prof. Dr. Ebru YABAŞ, Editör, IKSAD Publishing House, ss.102-124, 2023
CHAPTER 1 ANTIBACTERIAL NATURAL DYES AND APPLICATIONS Kayaş E., Canpolat R., Özaydın F., ŞİMŞİR M. Current research from science to technology, Prof. Dr. Mehmet ŞİMŞİR Prof. Dr. Salim Cem İNAN Assoc. Prof. Dr. Sayiter YILDIZ Assoc. Prof. Dr. Ebru YABAŞ, Editör, IKSAD Publishing House, ss.3-16, 2023
Biocomposites: Advances in Research and Applications Chapter 2. Boron-Substituted Biomaterials Abuhamed N., Arslan S., Öksüz K. E. Biocomposites: Advances in Research and Applications, James R. Bush, Editör, Nova Science Publishers, Inc., New York, ss.105-140, 2023
Bioprinting the Human 3D-Printable Materials for Tissue Engineering Öksüz K. E. Bioprinting the Human, Soner Şahin,MD – Professor,Faculty of Medicine,Department of Neurosurgery,Nisantasi University,Istanbul,Turkey,Kenan Demir,MD – Health Sciences University,Samsun Training and Research Hospital,Samsun Eğitim ve Araştırma Hastanesi,İlkadım,Turkey., Editör, NOVA Science Publishers Inc. , New York, ss.17-36, 2022
CHARACTERIZATION TECHNIQUES OF HERBAL ESSENTIAL OILS YABAŞ E., ERDEN F., ŞİMŞİR M. DIFFERENT PERSPECTIVES IN MEDICINAL AND AROMATIC PLANTS, ÖZYAZICI Gülen, UÇAR Esra, Editör, Iksad Publications, ss.187-204, 2022
CHARACTERIZATION TECHNIQUES OF HERBAL ESSENTIAL OILS YABAŞ E., ERDEN F., ŞİMŞİR M. DIFFERENT PERSPECTIVES IN MEDICINAL AND AROMATIC PLANTS, Özyazıcı Gülen, Esra Uçar, Editör, Iksad, ss.187-204, 2022
CHARACTERIZATION TECHNIQUES OF HERBAL ESSENTIAL OILS Yabaş E., Erden F., Şimşir M. DIFFERENT PERSPECTIVES IN MEDICINAL AND AROMATIC PLANTS, Gülen ÖZYAZICI,Esra UÇAR, Editör, İksad Yayınevi, Ankara, ss.187-416, 2022
New generation Chemical materials Yabaş E., Başer P., Kul M. Current Studies at Pssitive Sciences, Dr. Mehriman Emek,Dr. E. İlhan Şahin, Editör, İKSAD yayınevi, Ankara, ss.113-132, 2020
FARKLI TÜRDEKİ FTALOSİYANİN BİLEŞİKLERİNİN İNCE FİLM YÜZEYMORFOLOJİLERİNİN İNCELENMESİ YABAŞ E., ÖZER A. GELECEĞİN DÜNYASINDA BİLİMSEL VE MESLEKİ ÇALIŞMALARFEN VE MATEMATİK BİLİMLERİ, İSHAK ALTUN, YUSUF SERT, CANAN BAŞLAK, Editör, EKİN BASIN DAĞITIM, Bursa, ss.1-17, 2018
High Performance and Optimum Design of Structures and Materials Book Section:11 Surface Modification Öksüz K. E., Gün T., Şimşir M. High Performance and Optimum Design of Structures and Materials Book, W.P. De Wilde,Vrije Universiteit Brussel,Belgium S. Hernández,University of A Coruña,Spain C.A. Brebbia,Wessex Institute of Technology,UK, Editör, WIT Press , London, ss.545-552, 2014
Section 11. Surface Modification ÖKSÜZ K. E., Gün T., ŞİMŞİR M. High Performance and Optimum Design of Structures and Materials Book, W.P. De Wilde, S. Hernández, C.A. Brebbia, Editör, WIT Press , ss.545-552, 2014
Powder Metallurgy for Automotive Aluminium Alloys Hard and Super Hard Materials Book Composites Chapter 25: Investigation of Mechanical Behavior of B4C/Diamond Reinforced Fe/Co Metal Matrix Composites Produced by PM Şimşir M., Öksüz K. E., Şahin Y. Powder Metallurgy for Automotive Aluminium Alloys Hard and Super Hard Materials Book, P.Ramakrishan, Editör, MEDTEC Publisher, Scientific Int.Pvt.Ltd., Pune, ss.203-209, 2014
Yozgat/Sorgun (Türkiye) Linyitinin Flotasyon Performansına Flotasyon Reaktiflerinin Etkisinin Araştırılması Kaya Ö., Özütürker Ş. AL FARABI 14th International Scientific Research and Innovation Congress, Konya, Türkiye, 25 - 26 Nisan 2025, ss.1149-1156, (Tam Metin Bildiri)
NEW GENERATION HYBRID NANOMATERIALS IN FUTURE MATERIALS TECHNOLOGIES YABAŞ E., ŞİMŞİR M. II. INTERNATIONAL CONGRESS ON ADVANCED RESEARCH AND APPLICATIONS, 19 - 20 Eylül 2024, (Tam Metin Bildiri)
Demir (III) Oksit (Fe2O3) Nanopartikülerinin Asidik ve Alkali Ortamlarda Zeta Potansiyeli Değişimleri ARSLAN S., ÖKSÜZ K. E. Karadeniz - 15th International Conference On Applied Sciences, Rize, Türkiye, 08 Mart 2024, ss.254-260, (Tam Metin Bildiri)
Effect of iron precursorson the properties of magnetic biochar composites for H2O2 sensing ATEŞ A., OSKAY K. O. 5. Bioenergy Studies Symposium, Türkiye, 17 - 18 Ocak 2024, (Özet Bildiri)
MICROBIOLOGICAL AND MOLECULAR ANALYSIS OF WATER WELLS AND YILDIZ RIVER PEKTAŞ A. N., ŞİMŞİR M. 5th International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2024), 26 - 28 Haziran 2024, (Tam Metin Bildiri)
Sivas/Gemerek Linyit Kömürünün Flotasyonunda Bastırıcı, Toplayıcı ve Köpürtücü Reaktiflerin Etkisi Kaya Ö., Özütürker Ş. 6. Baskent International Conference on Multidisiplinary Studies, Ankara, Türkiye, 24 - 26 Temmuz 2024, ss.561-566, (Tam Metin Bildiri)
INVESTIGATION OF T-JOINT BUTT WELDING OF STAINLESS AND PLAIN CARBON STEELS WITH METAL ACTIVE GAS WELDING IN PB POSITION ŞİMŞİR M., Ulaş G. II. INTERNATIONAL CONGRESS ON ADVANCED RESEARCH AND APPLICATIONS, 19 Eylül 2024
Linyit Kömürünün Flotasyonunda Bazı Proses Parametrelerinin İncelenmesi: Pülp pH'ı, Katı Oranı, Flotasyon Süresi ve Tane Boyutunun Etkisi Kaya Ö., Özütürker Ş. International Euroasia Congress on Scientific Researches and Recent Trends XIII, Ankara, Türkiye, 5 - 06 Kasım 2024, ss.364-370, (Tam Metin Bildiri)
Nanoparticle Production Using Food Waste: Sugar Beet Pulp (Paste) Example Balcan O., Sarıoğlu Cebeci M., Öksüz K. E. ICONFOOD’23 2nd International Congress on Food Researches, Sivas, Türkiye, 16 - 18 Ekim 2023, ss.537, (Tam Metin Bildiri)
Metakaolin-based geopolymer matrix design for higher flexural strength (Invited) Sa Riberio R., Sa Riberio M., Samuel D., Özer A., Kriven W. M. 47th ICACC, Florida, Amerika Birleşik Devletleri, 22 - 26 Şubat 2023, ss.1-5, (Özet Bildiri)
Investigation of Wear Properties of Mullite-Ceria-Zirconia Ceramics HAFIZOĞLU M. A., AKKUŞ A., BOYRAZ T. V. International Cappadocia Scientific Research Congress, Nevşehir, Türkiye, 5 - 07 Kasım 2023, (Tam Metin Bildiri)
Meme Kanseri Tedavisi için Sitratla Stabilize Edilmiş Fe3O4 Nanopartikülleri/Pertuzumab İçeren Makro Gözenekli Süngerin Geliştirilmesi Alandağ C., Aslan S., Öksüz K. E., Yılmaz Göç R. 10. Türk Tıbbi Onkoloji Kongresi, Antalya, Türkiye, 26 - 30 Nisan 2023, ss.108, (Özet Bildiri)
Development of porous geopolymers using different methods: Preliminary results Qadeer A., Qureshi K., Aziz S., Nazir I., Özer A., Kriven W. M. 47th ICACC, Florida, Amerika Birleşik Devletleri, 22 - 26 Şubat 2023, ss.1-5, (Özet Bildiri)
METAKAOLIN-BASED GEOPOLYMER COMPOSITE MODELING FOR HIGHER STRENGTH Sá Ribeiro R. A., Sa Riberio M., Samuel D., Özer A., Kriven W. M. ECI2023, Reggio Calabria, İtalya, 28 Mayıs - 02 Haziran 2023, ss.1-5, (Özet Bildiri)
ESTAŞ DOMESTIC AND NATIONAL NITRILE GLOVE PRODUCTION Canpolat R., Özaydın F., Azgın E., ATCIYURT B. C., ŞİMŞİR M., Mavuş O., et al. INTERNATIONAL CONGRESS ON ADVANCED RESEARCH AND APPLICATIONS, Türkiye, 01 Aralık 2023, ss.443-453, (Tam Metin Bildiri)
DEVELOPMENT OF GAMMA-RAY AND NEUTRON RADIATION SHIELDING USING GEOPOLYMER-PARTICULATE COMPOSITES Fields A. W., Zhou J., Özer A., Di Fulvio A., Kriven W. M. ECI2023, Reggio Calabria, İtalya, 28 Mayıs - 02 Haziran 2023, ss.1-5, (Özet Bildiri)
In-situ Self-Healing and Self-Glazing Geopolymer Composites for high temperature Applications Mokthari P., Samuel D., Özer A., Kriven W. M. 47th ICACC, Florida, Amerika Birleşik Devletleri, 22 - 26 Şubat 2023, ss.1-5, (Özet Bildiri)
Investigation of Wear Properties of Mullite-Yttria-Zirconia Ceramics HAFIZOĞLU M. A., BOYRAZ T., AKKUŞ A. 12. EUROASIA(International Congress on Scientific Research and Recent Trends-XII), Ankara, Türkiye, 29 - 30 Kasım 2023, (Tam Metin Bildiri)
Investigation of Wear Properties of Mullite-Alumina-Zirconia Ceramics HAFIZOĞLU M. A., BOYRAZ T., AKKUŞ A. Ege 10th Internatıonal Conference on Applıed Scıences, İzmir, Türkiye, 20 - 22 Aralık 2023, (Tam Metin Bildiri)
Yozgat/Sorgun Linyit Kömürünün Flotasyonunda Farklı Köpürtücülerin Performansının Araştırılması Kaya Ö., Özütürker Ş. 6. International Ankara Multidisciplinary Studies Congress, Ankara, Türkiye, 13 - 14 Ekim 2023, ss.469-474, (Tam Metin Bildiri)
Processing And Characterization Of Crystallographically Textured BiScO3−PbTiO3 Based High Temperature Piezoelectrıc Ceramics ASTAN S., AKÇA E. 6. International Palandoken Scientific Studies Congress, Erzurum, Türkiye, 24 - 25 Haziran 2023, (Özet Bildiri)
Geopolymer composite bamboo fiber reinforcement for high flexural strength and low water absorption (Invited) Sá Ribeiro M. G., Miranda I. P., Özer A., Kriven W. M., Sa Ribeiro R. A. 47th ICACC, Florida, Amerika Birleşik Devletleri, 22 - 26 Şubat 2023, ss.1-5, (Özet Bildiri)
Prediction of Wear Properties of CaO and MgO Doped Stabilized Zirconia Ceramics With Gaussian Process Regression (GPR) YÜKSEK A. G., BOYRAZ T., KARTAL A., AKKUŞ A. 12th International Congress On Engineerıng Architecture and Design, İstanbul, Türkiye, 23 - 25 Aralık 2023, cilt.1, (Tam Metin Bildiri)
EFFECTS OF AMOUNT OF Co AND Ti-COATED DIAMOND ON THE WEAR PROPERTIES OF SEGMENTS FOR GANGSAW BLADE IN NATURAL STONE CUTTING PROCESS ŞİMŞİR M. 2nd INTERNATIONAL MATERIALS ENGINEERING AND ADVANCED MANUFACTURING TECHNOLOGIES CONGRESS (IMEAMTC’23), İstanbul, Türkiye, 12 - 13 Ocak 2023, (Tam Metin Bildiri)
COMPARISON OF THE EFFECT OF SUBSTRATES IN TERMS OF HARDNESS/SCRATCH PROPERTIES OF CrN COATED BY PVD METHOD ŞİMŞİR M. 2nd International Materials Engineering and Advanced Manufacturing Technologies Congress (IMEAMTC'23), İstanbul, Türkiye, 12 - 13 Ocak 2023, ss.12-21, (Tam Metin Bildiri)
Investigation of Wear Properties of Mullite-Magnesia-Zirconia Ceramics HAFIZOĞLU M. A., AKKUŞ A., BOYRAZ T. 12. EUROASIA(International Congress on Scientific Research and Recent Trends-XII), Ankara, Türkiye, 29 - 30 Kasım 2023, (Tam Metin Bildiri)
Prediction of Wear Properties of Experimental Produced Porcelain Ceramics Using Support Vector Machine (SVM) BOYRAZ T., YÜKSEK A. G., TOPÇU A., AKKUŞ A. V. Baskent International Conference on Multidisciplinary Studies, Ankara, Türkiye, 21 - 22 Aralık 2023, (Tam Metin Bildiri)
REACTIVE METAL/GRAPHENE OXIDE DOPING TO FABRICATE POROUS GEOPOLYMERS FOR ARSENIC REMOVAL Qadeer A., Özer A., Kriven W. M. ECI2023, Reggio Calabria, İtalya, 28 Mayıs - 02 Haziran 2023, ss.1-5, (Özet Bildiri)
Dielectric and Electromechanical Properties of Textured BiScO3–PbTiO3 Based High Temperature Piezoceramics ASTAN S., AKÇA E., DURAN C. 3rd International Materials Technologies and Metallurgy Conference-2023, Türkiye, 11 - 13 Ekim 2023
Ratlarda Kritik Boyutlu Mandibula Korpus Defektinde Bor Katkılı Nano Hidroksiapatit Biyokompozitlerin Kemik Rejenerasyonu Üzerine Etkisinin Değerlendirilmesi Demirkıran B. B., Şahin İnan Z. D., Hamutoğlu R., Öksüz K. E., Hasbek Z., Altuntaş E. E. 44. Türk Ulusal Kulak Burun Boğaz ve Baş Boyun Cerrahisi Kongresi, Antalya, Türkiye, 15 - 19 Kasım 2023
Fabrication of Crystallographically Textured BiScO3–PbTiO3 Based High Temperature Piezoelectric Ceramics by Templated Grain Growth AKÇA E., ASTAN S. XI. Uluslararası Katılımlı Seramik Kongresi, Afyon, Türkiye, 21 - 23 Kasım 2022, (Özet Bildiri)
Bal Peteği Yapısında Nikel Elektro Kaplamaların Üretilmesi Oskay K. O., Özkan B. 2. Uluslararası Lisansüstü Çalışmalar Kongresi, Balıkesir, Türkiye, 8 - 11 Haziran 2022, ss.829-830, (Özet Bildiri)
Reduced Graphene Oxide Decorated with Nickel Nanoparticles for Glucose Sensing Gharsallah F., TOPAL CANBAZ G., KEKLİKCİOĞLU ÇAKMAK N., ATEŞ A., OSKAY K. O., Ghorbel N., et al. 5 th International Conference on Physical Chemistry & Functional Materials (PCFM), 23 Haziran 2022, (Tam Metin Bildiri)
Nonenzymatic Glucose Sensor Based on In Situ Reduction of NiO-Graphene Nanocomposite Gharsallah F., Topal Canbaz G., Keklikcioğlu Çakmak N., Oskay K. O., Ateş A., Ghorbel N., et al. 5th International Conference on Physical Chemistry & Functional Materials, Sivas, Türkiye, 23 - 25 Haziran 2022, ss.40, (Özet Bildiri)
Ardıç Yağı Katkılı Hidrofilik Fiber İpliklerin Antibakteriyel ve Hemolitik Aktivitelerinin İncelenmesi Öksüz K. E., Göç R., Dinçer E., Akdeniz E., Şahin F. B., Çelik U. KARADENIZ 9th International Conference on Apllied Sciences, Artvin, Türkiye, 25 - 26 Haziran 2022, cilt.1, ss.32, (Özet Bildiri)
Asetaminofen ile Hasar Gören Böbreklerde Eritropoetin ve Mezenkimal Kök Hücre Uygulamasının Taramalı Elektron Mikroskobu ile Değerlendirilmesi Göç R., Öksüz K. E., Çelik U., Çoban Z. B., Tandıroğlu A., Yay A. H., et al. KARADENIZ 9th International Conference on Apllied Sciences, Artvin, Türkiye, 25 - 26 Haziran 2022, cilt.1, ss.30-31, (Özet Bildiri)
Biyoaktif Nanoseramik Katkılı Biyopolimer Filmlerin Üretimi ve Karakterizasyonu Öksüz K. E., Göç R., Beyazıt C., Alizadehyegani N., Akbarlı N. KARADENIZ 9th International Conference on Apllied Sciences, Artvin, Türkiye, 25 - 26 Haziran 2022, cilt.1, ss.29, (Özet Bildiri)
Biomass Derived Carbon for Electrical Energy Storage Akgül G., Oskay K. O., Buldu M., Karamustafa A., Sözer S., Erdem E. 3. Bioenergy Studies Symposium, Samsun, Türkiye, 20 - 21 Mayıs 2021, ss.81, (Özet Bildiri)
Investigation of The Effect of Vermiculite (Yıldızeli/Sivas) Addition on The Properties of Ceramic Brick BOYRAZ T., ÖNEN U., TAPİK Ş. Global Conference on Engineering Research (GLOBCER'21), Bandırma, 2 - 05 Haziran 2021, (Tam Metin Bildiri)
Thickness dependence of structural and optical properties of nitrogen doped ZnO thin films on glass Hopoğlu H., Aydınoğlu H. S., Özer A., Şenadım Tüzemen E. 2nd International Conference on Light and Light-based Technologies (ICLLT), Gazi University, Ankara, Turkey, Ankara, Türkiye, 26 - 28 Mayıs 2021, ss.114, (Özet Bildiri)
Studies on the Distribution of the Black Sea Region Diatomes DİRİCAN S., KALELİ A., YILMAZ E., ÖZER A., DAYIOĞLU H. International Aegean Symposiums on Natural and Medical Sciences-III, İzmir, Türkiye, 12 - 13 Mart 2021, ss.91-96, (Tam Metin Bildiri)
Influence of Pressure on ZnO/Al2O3 Produced by RF Magnetron Sputtering on Glass Substrate Hopoğlu H., Aydınoğlu H., DEMİR İ., ALTUNTAŞ İ., ŞİMŞİR M., ŞENADIM TÜZEMEN E. 9TH INTERNATIONAL ADVANCED TECHNOLOGIES SYMPOSIUM (IATS'21), 27 - 28 Ekim 2021, (Tam Metin Bildiri)
Investigation of The Effect of Vermiculite (Yıldızeli/Sivas) Addition on The Properties of Ceramic Floor Tiles BOYRAZ T., ÖNEN U., TAPİK Ş. 4. International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC'21), Nevşehir, Türkiye, 28 - 30 Mayıs 2021, (Tam Metin Bildiri)
Fabrication, Characterization and Wear Properties of Mullite Reinforced Al2O3-Doped ZrO2 Ceramic Composites Hafızoğlu M. A., Akkuş A., Boyraz T. 1nd. Global Conference on Engineering Research (GLOBCER'21), Balıkesir, Türkiye, 2 - 05 Haziran 2021, ss.673-682, (Tam Metin Bildiri)
Elektro Çekim Yöntemiyle Üretilen Poli(Vinil Alkol)/Sodyum Aljinat Nanofiberlerin Karakterizasyonu Tuna E. B., Öksüz K. E., Özer A. 6nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’21), Nevşehir, Türkiye, 26 - 28 Kasım 2021, cilt.1, sa.1, ss.409-413
Fabrication, Characterization and Wear Properties of Mullite Reinforced Silica-Doped Zirconia Ceramic Composites HAFIZOĞLU M. A., BOYRAZ T., AKKUŞ A. 4. International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC'21), Nevşehir, Türkiye, 28 - 30 Mayıs 2021, ss.175-180
ÖSTENİTİK PASLANMAZ ÇELİKLERİN SÜRTÜNME KARIŞTIRMA KAYNAĞI İLE BİRLEŞTİRİLMESİ VE KARAKTERİZASYONU Özer A., Alnak Y., Savaş V. IMSMATEC The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology inTURKEY, Nevşehir, Türkiye, 24 - 26 Haziran 2020, ss.345-351, (Tam Metin Bildiri)
The Importance of Geopolymer Structures in Turkey: Case of Diatomite Doped Fly Ash Based Geopolymers Şahbudak K., Özer A. The Importance of Geopolymer Structures in Turkey: Case of Diatomite Doped Fly Ash Based Geopolymers, Nevşehir, Türkiye, 24 - 26 Haziran 2020, ss.355-357, (Tam Metin Bildiri)
INVESTIGATION OF CHARACTERIZATION AND MECHANICAL PROPERTIES, USE OF METAL COATED DIAMOND AND WC IN SOCKET PRODUCTION SÜBÜTAY H., ŞİMŞİR M. IMSMATEC’xx19, 21 - 23 Haziran 2019, (Tam Metin Bildiri)
Soket üretiminde metal kaplı elmas ve SiC kullanımı karakterizasyonu ve mekanik özelliklerinin incelenmesi SÜBÜTAY H., ŞİMŞİR M. 4. uluslararası mühendislik mimarlık ve tasarım kongresi, 23 - 24 Nisan 2019, (Tam Metin Bildiri)
The Effect of Ball Milling Speed on the Penetration of Cr and Zr into Cu for Production of Cu1CrZr Alloy Powder Kul M., Özer A., Öksüz K. E., Kurt N. XVI. International Scientific Conference Machines. Technologies., Sofija, Bulgaristan, 11 - 14 Eylül 2019, cilt.3, ss.233-237, (Tam Metin Bildiri)
The influence of deposition pressure and sputtering power on the structural and optical properties of gallium oxide films deposited by RF magnetron sputtering ŞENADIM TÜZEMEN E., Mobtakeri S., AKALTUN Y., ÖZER A., KILIÇ M., GÜR E. 6th International Conference on Materials Science and Nanotechnology For Next Generation (MSNG-2018), 16 - 18 Ekim 2019, (Özet Bildiri)
Ultrahigh Density α-Al2O3 Ceramics Produced By Slip Casting Öksüz K. E. 6. International Conference on Mathematics, Engineering, Natural Medical Sciences, (EJONS 6), Adana, Türkiye, 8 - 10 Mart 2019, cilt.1, ss.585-594, (Tam Metin Bildiri)
Preparation of Highly Porous ZrO2 Bone Scaffold Öksüz K. E. 6. International Conference on Mathematics, Engineering, Natural Medical Sciences, (EJONS 6), Adana, Türkiye, 8 - 10 Mart 2019, cilt.1, ss.595-600, (Tam Metin Bildiri)
Radiation Attenuation Properties Of Aluminum Titanate-Spinel Composites For Co-60 Gamma Source Görkem Ç., TUĞRUL A. B., ÖNEN U., BOYRAZ T., BÜYÜK B. 21st International Conference Materials, Methods Technologies, Burgas, Bulgaristan, 1 - 05 Temmuz 2019, ss.145-152, (Tam Metin Bildiri)
The Effect of Different Rotation Speeds and Feedrates on the Friction Stir Welding ofAISI304/AISI316 Stainless Steel Pairs ALNAK Y., ÖZER A., SAVAŞ V. Proceedings of 7th International Academic Conference on Economics,Business, Engineering and Social Sciences, 21 - 23 Aralık 2019, (Özet Bildiri)
Fiziksel Buhar Biriktirme Yöntemi İle AISI O2 ve K390 Çeliklerine CrN Kaplamanın Karakterizasyonu ŞİMŞİR M. IMSTEC 2019, 4th International Conference on Material Science and Technology, KIZILCAHAMAM/ANKARA, Türkiye, 18 - 20 Ekim 2019, ss.795-800, (Tam Metin Bildiri)
Sivas İli Ekonomik Verileri Şimşir M., Dündar S. 3. Maden Kenti Sivas Zirvesi, Sivas, Türkiye, 16 - 17 Kasım 2017, ss.163-186, (Tam Metin Bildiri)
A New Zinc Phthalocyanine-Graphene Oxide Hybrid For Biomedical Applications YABAŞ E., AYDIN H., ÖZER A. 1st International Cancer Days, 19 - 21 Eylül 2019, (Tam Metin Bildiri)
Fiziksel Buhar Biriktirme Yöntemi ile DIN 1.2379 Çeliğine TiCN ve CrN Sert Kaplamaların Mekanik Özelliklerinin Karşılaştırılması ŞİMŞİR M. IMSTEC 2019, 4th International Conference on Material Science and Technology, KIZILCAHAMAM/ ANKARA, 18 - 20 Ekim 2019, ss.819-825
Effects of Mo and B Additions on Induction Hardening of Fe-C-Ni-Cu Metal Matrix Composites Produced by Warm Compaction Method Gün T., ŞİMŞİR M., Karaca B., Özaydın F. 19th International Metallurgy and Materials Congress, 25 - 27 Ekim 2018, (Tam Metin Bildiri)
İpek serisin–Hap-RGD peptiti içeren nanofibriler liflerin kemik doku mühendisliği çalışmaları için üretilmesi Bektaş T., Rıschka K., Öksüz K. E., Özer A., Özdemir T. 23. Biyomedikal Bilim ve Teknoloji Sempozyumu, BIOMED2018-TR, İstanbul, Türkiye, 15 - 16 Aralık 2018, cilt.1, ss.132, (Özet Bildiri)
Th e Eff ects of Austempering Time and Diff erent Quenching Media on Mechanical Properties of CAM Shaft Karaca B., Gün T., Aydın M., ŞİMŞİR M. 19th International Metallurgy and Materials Congress, 25 - 27 Ekim 2018, (Tam Metin Bildiri)
Using of Metal Coated Diamond in Design of Segment Used inNatural Stone Sawing Process SÜBÜTAY H., ŞİMŞİR M. CIEA 2018, 20 - 22 Eylül 2018, (Tam Metin Bildiri)
ORGANİK FİLM KAPLAMANIN FARKLI REZİN ESASLI MATERYALLERDEKİYÜZEY PÜRÜZLÜLÜĞÜ VE RENK DEĞİŞİMİ ÜZERİNE ETKİLERİ GÖZE SAYGIN A., ÜNAL M., BOLAYIR G., ÖZER A. 25. ULUSLARARSI İZDO KONGRESİ, 9 - 11 Kasım 2018, (Özet Bildiri)
Structural Evolution and Dielectric Properties of Ba(Ti1-x Zrx)O3Perovskite Ceramics Öksüz K. E., Şen Ş., Şen U. ICSTR Athens – International Conference on Science TechnologyResearch, 19-20 July, 2018, Athens, Yunanistan, 19 - 20 Temmuz 2018, cilt.1, ss.9, (Özet Bildiri)
ANTIBACTERIAL EFFECT OF CARBON-BASED NANOMATERIALS: AN IN VITRO STUDY KEÇECİLER C., ÇELİK O., Maral D., ELTEM R., ÖZER A., Özer Ü. H., et al. KOMPEGE 2018-IV. International Composite Material Symposium 2018, İzmir, Türkiye, 6 - 08 Eylül 2018, ss.9, (Özet Bildiri)
Powder Copper Extraction and Diamond Recovery from Scrapped Saw Blades by Electro Dissolution-Deposition OSKAY K. O., KUL M., KUMRUOĞLU L. C., KARAKAYA İ., ŞİMŞİR M., ERTAŞ H. A., et al. ISEM 2018 4th INTERNATIONAL SYMPOSIUM ON ENVIRONMENT AND MORALSSarajevo / Bosnia and Herzegovina 27-29 JUNE 2018, Sarajevo, Bosna-Hersek, 27 - 29 Haziran 2018, (Tam Metin Bildiri)
The sintering properties of Cu1CrZr alloys produced by mechanochemical activation Öksüz K. E., Sübütay H., Şimşir M., Kumruoğlu L. C., Kul M., Özer A. 4th International Turkic World Conference on Chemical Sciences and Technologies ITWCCST 2018, Kyyiv, Ukrayna, 7 - 10 Eylül 2018, cilt.1, ss.0-63, (Özet Bildiri)
Synthesis of Thiadiazole Tetrasubstituted Zinc Phthalocyanine Compound and Investigation of the Potential Use in Organic Solar Cells YABAŞ E., ÖZER A., KUL M., BAŞER P. CIEA’2018, Sivas, Türkiye, 20 - 22 Eylül 2018, ss.32, (Özet Bildiri)
A MODEL FOR DEVELOPMENT OF COUNTRY ON THE BASIS OF INNOVATION GOVERNMENT-UNIVERSITYINDUSTRYCOOPERATION (GUIC) ŞİMŞİR M. INTERNATIONAL CONFERENCE ONINNOVATIVE ENGINEERINGAPPLICATIONS, Sivas, Türkiye, 20 - 22 Eylül 2018, (Tam Metin Bildiri)
The effect of ball milling time on the mechanochemical activation properties of Cu1CrZr alloys Özer A., Öksüz K. E., Sübütay H., Kurt N., Şimşir M., Kumruoğlu L. C., et al. 4th International Turkic World Conference on Chemical Sciences and TechnologiesITWCCST 2018, Kiev, Ukrayna, 7 - 10 Eylül 2018, cilt.1, (Özet Bildiri)
The sintering properties of Cu1CrZralloys produced bymechanochemical activation ÖKSÜZ K. E., ŞİMŞİR M., KUL M., KUMRUOĞLU L. C., ÖZER A. 4th International Turkic World Conference onChemical Sciences and Technologies (ITWCCST 2018)2nd International Conference on Innovations in Natural Science and Engineering, 7 - 10 Ekim 2018
INVESTIGATION OF THE USABILITY POTENTIALS OF DIFFERENT TYPE PHTHALOCYANINE COMPOUNDS IN ORGANIC SOLAR CELLS YABAŞ E., ÖZER A. II. International Scientific and Vocational Studies Congress, 5 - 08 Temmuz 2018
The Influence of Composition and Calcination Temperature on the Phases in (Ba1-xSrxZr)O3 Perovskites Torman M., Öksüz K. E., Şen Ş., Şen U. 10th International Conference on Materials Science Engineering (Bramat 2017), Brasov, Romanya, 8 - 11 Mart 2017, cilt.907, ss.38-42, (Tam Metin Bildiri)
XRD Analysis and FTIR Study on Calcined Bones ÖKSÜZ K. E., YILMAZ E. N., YAZEL D., ÖZER A. 10th International Conference on Materials Science Engineering – BraMat 2017, Brasov, Romanya, 8 - 11 Mart 2017, cilt.1, ss.85, (Özet Bildiri)
CHARACTERIZATION OF FLY ASH-PERLITE CEMENT LIKE MORTARS FOR NEXT GENERATION CONCRETE INDUSTRY: from A Viewpoint of Pore Formation and Phase Analysis ŞAHBUDAK K., ÖZER A. ISME 2017, Muğla, Türkiye, 27 - 29 Eylül 2017, (Tam Metin Bildiri)
Optimization of electropherotic deposition of YSZ Oskay K. O., Demirel B. APMAS 2017, Muğla, Türkiye, 22 - 26 Nisan 2017, (Tam Metin Bildiri)
Characterization of CRN Coating on DIN 1.2379 and DIN 1.2842 Cold Work Tool Steels by Physical Vapor Deposition KORKMAZ S., ŞİMŞİR M., KUL M. IMSTEC 2017, 11 - 13 Ekim 2017, (Özet Bildiri)
Tribological Behavior of Distaloy DC Components Öksüz K. E., Akınalp Y. A., Kumruoğlu L. C. 10th International Conference on Materials Science Engineering (Bramat 2017), Brasov, Romanya, 8 - 11 Mart 2017, cilt.907, ss.121-125, (Tam Metin Bildiri)
AN OXIDATION STUDY OF NiCoCrAl COATINGS PRODUCED BY ELECTROLYTIC CO-DEPOSITION METHOD Oskay K. O., Demirel B. APMAS 2017, Muğla, Türkiye, 22 - 26 Nisan 2017, (Özet Bildiri)
Effect of SiC Particle Size on the Physical and Mechanical Properties of NiTi Alloys Akkan H., Şimşir M., Öksüz K. E. 10th International Conference on Materials Science Engineering (Bramat 2017), Brasov, Romanya, 8 - 11 Mart 2017, cilt.907, ss.3-7, (Tam Metin Bildiri)
Thermal behaviour and structure of BaZrO3 nanoparticles ÖKSÜZ K. E., ŞEN Ş., ŞEN U. 4th Central and Eastern European Committee for Thermal Analysis and Calorimetry, Kişinev, Moldova, 28 - 31 Ağustos 2017, cilt.1, (Özet Bildiri)
ÇEVRE DOSTU KNN (K0.5Na0.5NbO3) PİEZOSERAMİKLERİNE KATKILANDIRMANIN VE SİNTERLEME ATMOSFERİNİN ETKİSİ YILMAZ H., MURUTOĞLU M., AKÇA E. ElektroseramikTR, Türkiye, 2 - 03 Kasım 2017, (Özet Bildiri)
Formation Of Al-Ti Based Phases For Grain Refinement Of Al Alloys Produced By High Energy Ball Milling ARIKOĞLU M., APAYDIN F., ÖZER A. bramat 2017, Brasov, Romanya, 8 - 11 Mart 2017, (Tam Metin Bildiri)
PNN-PZT Ferroelektriklerinde Fe Katkılandırılmasının Etkisi YILMAZ H., Teber M., AKÇA E. ElektroseramikTR, Türkiye, 2 - 03 Kasım 2017, (Özet Bildiri)
Effect of Metal Coated Diamond on Microstructure and Mechanical Properties of Metal Matrix Composites Sübütay H., ŞİMŞİR M. IMSTEC 2017, 11 - 13 Ekim 2017, (Özet Bildiri)
Dielectric Properties of Sr-Doped BaZrO3 Ceramics Torman M., Öksüz K. E., Şen Ş., Şen U. 10th International Conference on Materials Science Engineering (Bramat 2017), Brasov, Romanya, 8 - 11 Mart 2017, cilt.907, ss.21-24, (Tam Metin Bildiri)
A Study on the Fabrication of TiNi/SiCp Alloys By PM Method and its Characterization ÖKSÜZ K. E., ŞİMŞİR M., Akkan H. IMSTEC 2017, 11 - 13 Ekim 2017, (Özet Bildiri)
Characterization of CrN Coatiıng on DIN1.2379 and DIN 1.2842 Cold Work Tool Steels By Physical Vapor Deposition Korkmaz S., ŞİMŞİR M., KUL M. IMSTEC 2017, 11 - 13 Ekim 2017, (Özet Bildiri)
THE ELEMENTAL AND STRUCTURAL ANALYSIS OF ARCHAEOLOJICAL FINDINGS: OYLUM HÖYÜK CASE REPORT BOZKURT A., BOZKURT D., ÖZER A., ENGİN A. 2nd International Conference on Material Science and Technology in Cappadocia (IMSTECI7), 11 - 13 Ekim 2017, (Özet Bildiri)
Synthesis and Characterization of CeO2 Doped ZrO2 Ceramics by a Simple Sol-Gel Route Özer U. H., Öksüz K. E., Özer A. 10th International Conference on Materıals Science Engineering (Bramat 2017), Brasov, Romanya, 8 - 11 Mart 2017, cilt.907, ss.56-60
The analytical investigations of structural formation in synthetic and bovine hydroxyapatite bioceramics ÖZER U. H., ÖKSÜZ K. E., ÖZER A. 4th Central and Eastern European Committee for Thermal Analysis and Calorimetry, Kişinev, Moldova, 28 - 31 Ağustos 2017, cilt.1
A Study on the Fabrication of TiNi/SiCp Alloys by PM Method and Characterization ÖKSÜZ K. E., ŞİMŞİR M., AKKAN H. The International Conference on Material Science and Technology in Cappadocia (IMSTEC 2017), Ürgüp-Nevşehir, Türkiye, 11 - 13 Ekim 2017, cilt.1, ss.774
pH Dependency EIS Study and Characterization of Geopolymer Structures Derived from Fly Ash ŞAHBUDAK K., ÖZER A. APMAS 2016, İstanbul, Türkiye, 1 - 03 Haziran 2016, ss.141, (Özet Bildiri)
Investigating the effect of testing parameters onadhesive wear using Taguchi method ŞİMŞİR M., SELÇUK B., ASLAN N. Advances in Materials and Processing Technologies, 17 - 20 Kasım 2014, (Tam Metin Bildiri)
Microstructural and Dielectric Properties of Ba Ti1 xZrx O3 Nano ceramics ÖKSÜZ K. E., ŞEN Ş., ŞEN U. 45th Internatioal SchoolConference on the Physics of Semiconductors, Katowice-Szczyrk, Polonya, 18 - 24 Haziran 2016, (Özet Bildiri)
Sintering Behavior and Microstructural Evaluation of MgO Doped Al2O3 Özer A., Kumruoğlu L. C., Çelik M., Emircan Ç., Öksüz K. E. 18th International Conference Materials, Methods Technologies, Burgas, Bulgaristan, 26 - 30 Haziran 2016, cilt.10, ss.367-373, (Tam Metin Bildiri)
HIGH ENERGY BALL MILLING OF YAG POWDERS SINTERING PROPERTIES AND MICROSTRUCTURAL EVALUATION ÖZER A., KILIÇ O. B. APMAS 2016, İstanbul, Türkiye, 1 - 03 Haziran 2016, (Özet Bildiri)
TiO2 Grafen Nano Kompozit Partikül Takviyeli Koruyucu Tekstillerin Geliştirilmesi Öksüz K. E., Özer A. 12. Ulusal Kimya Mühendisliği Kongresi (UKMK2016), İzmir, Türkiye, 23 - 26 Ağustos 2016, cilt.1, ss.1298-1309, (Tam Metin Bildiri)
Effect of Sintering Temperature on Dielectric Properties of SiO2 Doped BaTiO3 Ceramics Öksüz K. E., Torman M., Şen Ş., Şen U. 18th International Conference Materials, Methods Technologies, Burgas, Bulgaristan, 26 - 30 Haziran 2016, cilt.10, ss.361-366, (Tam Metin Bildiri)
EFFECT OF INDUCTION HARDENING OF Fe C Ni Cu Mo B METAL MATRİXCOMPOSİTES BY POWDER METALLURGY FOR GEAR PRODUCTION Gün T., ŞİMŞİR M., Özaydın F. ISMP'16, 12 - 14 Ekim 2016, (Tam Metin Bildiri)
Farklı Aşılayıcıların Kam Mili Döküm Kalitesine Etkisinin İncelenmesi ŞİMŞİR M., Kırgezen H., Özaydın F. IMSTEC'16, 6 - 08 Nisan 2016, (Tam Metin Bildiri)
Effect of Yttria on the Phase Formation and Sintering of HA Al2O3 Biocomposites ÖKSÜZ K. E., ÖZER A. BIOMATSEN 2016, 1 - 03 Haziran 2016, (Özet Bildiri)
Investigation of mechanical Properties of Fe C Ni Cu Mo B metal matrix composites by powder metallurgy for gear production GÜN T., ŞİMŞİR M. APMAS 2016, 1 - 03 Haziran 2016, (Özet Bildiri)
Sintering Characteristics and Grain Growth Behavior of SiO2 Doped BaTiO3 Ceramics Öksüz K. E., Şen Ş., Şen U. International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), Nevşehir, Türkiye, 6 - 08 Nisan 2016, cilt.1, ss.401-405, (Tam Metin Bildiri)
DİŞLİ ÜRETİMİ İÇİN TOZ METALURJİSİ YÖNTEMİ İLE ÜRETİLMİŞ Fe C Ni Cu Mo B METAL MATRİKSLİ KOMPOZİTİN MEKANİK ÖZELLİKLERİNİN ARAŞTIRILMASI GÜN T., ŞİMŞİR M., ÖZAYDIN F. IMMC 2016, 29 Eylül - 01 Ekim 2016, (Tam Metin Bildiri)
DÖKME DEMİRDEN ÜRETİLMİŞ KAM MİLLERİNİN AŞINMA ÖZELLİKLERİNE ISIL İŞLEMİN ETKİSİ KARACA B., ŞİMŞİR M., AYDIN M. IMMC 2016, 29 Eylül - 01 Ekim 2016, (Tam Metin Bildiri)
SINTERING BEHAVIOR AND MICROSTRUCTURAL EVALUATION OF MgO DOPED Al2O3 ÖZER A., KUMRUOĞLU L. C., Çelik M., Çağlar E., ÖKSÜZ K. E. Materials, Methods & Technologies, Journal of International Scientific Publications, Sozopol, Bulgaristan, 10 - 13 Ocak 2016, ss.367-373, (Tam Metin Bildiri)
INVESTIGATION OF TAPE CASTING PROCESS PARAMETERS FOR ALUMINA AND SILICA LAMINATED ARCHITECTURE ÖZER A., SARIOĞLU CEBECİ M., İŞLEK M. S. 1st Int. Materials Science and Technology in Cappadocia, Nevşehir, Türkiye, 9 - 11 Haziran 2016, (Özet Bildiri)
Some mechanical and physicochemical properties of potato starch based edible film Gölge E., Özer A., Bostancı E. The Food Factor I Barcelona Conference Barcelona (Spain), 2-4 November 2016, Barcelona, İspanya, 2 - 04 Kasım 2016, ss.277, (Özet Bildiri)
The Effects of Austempering and Induction Hardening on the wear properties of cam shaft made of ductile cast iron KARACA B., ŞİMŞİR M. APMAS 2016, 1 - 03 Haziran 2016, (Özet Bildiri)
FARKLI BİOSERAMİKLERDE AĞIZ GARGARALARININ RENK STABİLİTESİ VE YÜZEY PÜRÜZLÜLÜĞÜ ÜZERİNE ETKİLERİNİN ARAŞTIRILMASI SOYGUN K., Varol O., ÖZER A., BOLAYIR G. 20th International Congress on Aesthetic Denstistry, İstanbul, Türkiye, 21 - 23 Ekim 2016, (Özet Bildiri)
Investigations on Microstructural and Dielectric Properties of Ba Ti1xZrxO3 Ceramics ÖKSÜZ K. E., ŞEN Ş., ŞEN U. 6th International Advances in Applied Physics and Materials Science Congress Exhibition, İstanbul, Türkiye, 1 - 03 Haziran 2016, (Özet Bildiri)
EFFECT OF HEAT TREATMENT ON THE TENSILE PROPERTIES OF CAM SHAFTMADE OF DUCTILE CAST IRON Karaca B., ŞİMŞİR M., Akkan H. IMSP'16, 12 - 14 Ekim 2016
A Study on Al2O3 SiC B4C Reinforced Cu Sn Matrix Composite by Warm Compaction Powder Metallurgy Öksüz K. E. The 9th International Conference on Materials Science Engineering – (BraMat 2015)., Brasov, Romanya, 5 - 07 Mart 2015, cilt.1128, ss.123-126, (Tam Metin Bildiri)
EFFECTS OF BORONIZING COMPOSITION ON AISI1045 STEEL CAM SHAFT GEZER Ş., KUL M., OSKAY K. O., KARACA B., ÖZAYDIN F., BOLAT O., et al. INTERNATIONAL SYMPOSIUM ON SELF-PROPAGATING HIGH TEMPERATURE SYNTHESIS, 12 - 15 Ekim 2015
BALLISTIC PERFORMANCE OF KEVLAR49 UHMW PEHB26 HYBRID LAYEREDCOMPOSITE mert onur y., AVCI A., ŞİMŞİR M., AKDEMİR A. ULUSLARARASI KATILIMLI 1. SAVUNMA SANAYİ SEMPOZYUMU, Türkiye, 9 - 10 Nisan 2015, (Tam Metin Bildiri)
VORTEX DÖKÜM YÖNTEMİ İLE SİC TAKVİYELİ Al 7075 ALAŞIMMATRİSLİ KOMPOZİT KAM ÜRETİMİ Tuğçe Yasemin O., ŞİMŞİR M., Arslan Z., Aydın M., Bahadır K. ULUSLAR ARASI KATILIMLI III. EGE KOMPOZIT MALZEMELER SEMPOZYUMU, Türkiye, 5 - 07 Kasım 2015, ss.628-640, (Tam Metin Bildiri)
EFFECTS OF BORONIZING COMPOSITION ON GGG 60 CAM SHAFT Temizkan A., Kul M., Oskay K. O., Karaca B., Topçu B. INTERNATIONAL SYMPOSIUM ON SELF-PROPAGATING HIGH TEMPERATURE SYNTHESIS, Antalya, Türkiye, 12 - 15 Ekim 2015, ss.202, (Özet Bildiri)
Effects of Boronizing Composition on AISI 8620 Steel Cam Shaft ŞABAN G., KUL M., OSKAY K. O., KARACA B., OZAYDIN F., BOLAT O., et al. INTERNATIONAL SYMPOSIUM ON SELF PROPAGATING HIGH TEMPERATURE SYNTHESIS, 12 - 15 Ekim 2015
TOZ METALURJİSİ YÖNTEMİ İLE KOMPOZİT KAM ÜRETİMİ VEKARAKTERİZASYONU Arslan Z., ŞİMŞİR M., Tuğçe Yasemin O., Bahadır K., Hülya A. ULUSLAR ARASI KATILIMLI III. EGE KOMPOZIT MALZEMELER SEMPOZYUMU, Türkiye, 5 - 07 Kasım 2015, ss.599-609, (Tam Metin Bildiri)
Processing and Characterization of Porous Ti-HA Biocomposites Öksüz K. E., Kumruoğlu L. C., Dinçer C. International Porous and Powder Materials Symposium and Exhibition, PPM 2015, İzmir, Türkiye, 15 - 18 Eylül 2015, cilt.1, ss.602-605, (Tam Metin Bildiri)
Phase and Morphological Evaluation of Mechanically Activated Sintered YAG Powders Öksüz K. E., Apaydin F., Bozdag A. E., Cevik M., Ozer A. 5th International Biennial Conference on Ultrafine Grained and Nanostructured Materials, UFGNSM15, Tehran, İran, 11 - 12 Kasım 2015, cilt.11, ss.44-48, (Tam Metin Bildiri)
Effect of Sic(p) on the Microstructure and Mechanical Properties of Sintered Distaloy DC Composites Öksüz K. E., Kumruoğlu L. C., Tur O. 5th International Biennial Conference on Ultrafine Grained and Nanostructured Materials, UFGNSM15, Tehran, İran, 11 - 12 Kasım 2015, cilt.11, ss.49-54, (Tam Metin Bildiri)
16MnCr5 ÇELİĞİNDEN İMAL EDİLEN KAM MİLİNİN MİKROYAPISINA ISIL İŞLEMİN ETKİSİ halit S., ŞİMŞİR M., Bahadır K., Yıldırım E. Second International Iron and Steel Symposium, 1 - 03 Nisan 2015
An investigation of aluminum titanate-spinel composites behavior in radiation ÇEVİKBAŞ G., TUĞRUL A. B., ÖNEN U., BOYRAZ T., BÜYÜK B. APMAS 2014, 24 - 27 Nisan 2014, (Özet Bildiri)
CHARACTERIZATION AND MECHANICAL PROPERTIES OF PM Fe-Cu/SiCp ALLOYS Öksüz K. E., Gün T., Şimşir M. 4th International Conference on Ultrafine Grained and Nano-Structured Materials (UFGNSM 2013), Tehran, İran, 5 - 06 Kasım 2013, cilt.829, ss.73-75, (Tam Metin Bildiri)
Production of V-B Reinforced Fe Matrix Composites Öksüz K. E., Çevik M., Ahmet Enbiya B., Özer A., Şimşir M. ICMSMM 2014), XI International Conference on Materials Science, Metal and Manufacturing, Barcelona, İspanya, 18 - 19 Ağustos 2014, cilt.8, ss.704-708, (Tam Metin Bildiri)
Low cost-environmentfriendly lightweight brick production and their properties from recycled coal fly ash, ŞAHBUDAK K., çağlar B., ÖZER A., KUMRUOĞLU L. C., Nihal Ö. ISBE 2014, 28 Temmuz - 03 Ağustos 2014, (Tam Metin Bildiri)
Fabrication and Characterization of TiNi/SiCp Shape Memory Composites Öksüz K. E., Şimşir M., Akkan H. 17th International Metallurgy Materials Congress (IMMC 2014), İstanbul, Türkiye, 11 - 13 Eylül 2014, cilt.1, ss.731-737, (Tam Metin Bildiri)
Microstructural Characterization and Thermal Properties of Aluminium Titanate/Porcelain Ceramic Matrix Composites SAÇLI M., ÖNEN U., BOYRAZ T. 4th International Congress on Advances in Applied Physics and Materials Science (APMAS2014), 24 - 27 Nisan 2014, (Tam Metin Bildiri)
Microstructural Characterization and Thermal Properties of Aluminium Titanate/Talc Ceramic Matrix Composites ÖZSOY E., ÖNEN U., BOYRAZ T. 4th International Congress on Advances in Applied Physics and Materials Science (APMAS2014), 24 - 27 Nisan 2014, (Tam Metin Bildiri)
The microstructure and wear behaviour of sintered Astaloy 85Mo ÖKSÜZ K. E., Gün T., ŞİMŞİR M. High Performance and Optimum Design of Structures and Materials, Ostend, Belgium, 9 - 11 Haziran 2014, cilt.137
Usability of Sivas Kangal Coal Plant fly ash as environment friendly quotgeopolymericquot end-products, ÖZER A., ŞAHBUDAK K., çağlar B., Nihal Ö., KUMRUOĞLU L. C. ISBE 2014, 28 Temmuz - 03 Ağustos 2014
An investigation of aluminum titanate-spinel composites behavior in radiation ÇEVİKBAŞ G., TUĞRUL A. B., ÖNEN U., BOYRAZ T., BÜYÜK B. 4th International Congress in Advances in Applied Physics and Materials Science, APMAS 2014, 24 - 27 Nisan 2014
Evaluation of Vickers Hardness and Depth of Cure of Different Bulk Fill Composites after Aging ÜNAL M., SOYGUN K., ÖZER A., GÜLNAHAR E., BOLAYIR G. 101. FDİ Kongresi, İstanbul, Türkiye, 29 - 31 Ağustos 2013, (Özet Bildiri)
Investigation of Mechanical Properties and Microstructure of AA2024 and AA7075 Öksüz K. E., Bağırov H., Şimşir M., Ceyhun K., Aykut Ö., Yusuf Ziya D., et al. 4th International Conference on Mechanical and Aerospace Engineering (ICMAE 2013), Moscow, Rusya, 20 - 21 Temmuz 2013, cilt.390, ss.547-551, (Tam Metin Bildiri)
S N ratio analysis of tribological behavior of SiCp reinforced Al2124 based metal matrix composite Şahin Y., Öksüz K. E. The 3rd International Conference on Advanced Materials Research (ICAMR 2013), Dubai, Birleşik Arap Emirlikleri, 19 - 20 Ocak 2013, cilt.685, ss.24-29, (Tam Metin Bildiri)
Farklı Metal Alt Yapılı Dental Restorasyonlarda Oluşan Termal Streslerin Matematiksel Yöntemle Değerlendirilmesi COŞKUN M. E., BOYRAZ T., TUĞUT F., AKIN H. 19. Ege Dişhekimleri Odaları Uluslararası Bilimsel Kongre ve Sergisi, Fethiye, Türkiye, 26 - 28 Nisan 2013, (Özet Bildiri)
The Effect of Al2O3-SiC and B4C Additions on Mechanical Properties of CuSn Matrix Composites for Cutting Tools Öksüz K. E., Bağırov H., Yılmaz H., Buket S., Yıldırım V. The 3rd International Conference on Advanced Materials Research (ICAMR 2013), Dubai, Birleşik Arap Emirlikleri, 19 - 20 Ocak 2013, cilt.685, ss.15-18, (Tam Metin Bildiri)
Microstructural Characterization and Thermal Properties of Aluminum Titanate/ YSZ Ceramics ÇITAK E., BOYRAZ T. 3rd International Advances in Applied Physics and Material Science Congress (APMAS 2013), 24 - 28 Nisan 2013, (Tam Metin Bildiri)
Fabrication and Characterization of Porous Bioglass Ceramic Öksüz K. E., Bağırov H., Yılmaz H., Buket S., Yıldırım V. International Porous and Powder Materials Symposium and Exhibition, İzmir, Türkiye, 3 - 06 Eylül 2013, ss.602-605, (Tam Metin Bildiri)
Plazma Ark Işık Kaynağının Farklı Bulk Fill Kompozitlerin Mikrosertlikleri Üzerine Etkisi. SOYGUN K., ÜNAL M., ÖZER A., GÜLNAHAR E., BOLAYIR G. 20. Ege Bölgesi Diş Hekimleri Odaları Uluslararası Bilimsel Kongre ve Sergisi, İzmir, Türkiye, 7 - 10 Kasım 2013, (Özet Bildiri)
Microstructural Characterization and Thermal Properties of Aluminium Titanate /Spinel Ceramic Matrix Composites ÖNEN U., BOYRAZ T. 3rd International Advances in Applied Physics and Material Science Congress (APMAS 2013), 24 - 28 Nisan 2013, (Tam Metin Bildiri)
The Effect of B4C Additions on Mechanical Properties of Fe Cu Co Matrix Composites For Diamond Tools Öksüz K. E., Şahin Y., Yildirim E. S., Kayır Y. The 3rd International Conference on Advanced Materials Research (ICAMR 2013), Dubai, Birleşik Arap Emirlikleri, 19 - 20 Ocak 2013, cilt.685, ss.30-34
TM Metodu ile Üretilen Al2O3 Takviyeli Aluminyum Esaslı Kompozitlerin Aşınma Davranışı için İstatiksel Model Oluşturulması Şahin Y., Öksüz K. E. Tasarım-İmalat ve Analiz Kongresi ve CAD-CAM Günleri, (TİMAK) 2012, Balıkesir, Türkiye, 29 - 30 Kasım 2012, cilt.1, ss.442-455, (Tam Metin Bildiri)
Wear behavior of diamond plus SiCp-reinforced metal matrix composite by Taguchi method Şahin Y., Öksüz K. E., Şimşir M. 3rd International Conference on Manufacturing Science and Engineering (ICMSE 2012), Xiamen, Çin, 27 - 29 Mart 2012, ss.1309-1312, (Tam Metin Bildiri)
Caratterizzazione di Materiali Compositi a Matrice Metallica Fe Co e Rinforzo B4C Impregnati di Diamante Öksüz K. E., Şimşir M., Şahin Y. Diamante Applicazioni Tecnologia, Milan, İtalya, 12 Haziran - 12 Eylül 2012, cilt.18, ss.65-71, (Tam Metin Bildiri)
The Microstructure and Hardness of Al2O3 Particle Reinforced Composite Şahin Y., Öksüz K. E. The 3rd International Conference on Mechanical and Aerospace Engineering, ICMAE’2012, Paris, Fransa, 7 - 08 Temmuz 2012, cilt.232, ss.39-44
Sivas ta Alçıtaşı Jips Madenciliği ve Ürün Çeşitliliğindeki Gelişmeler Duran Z., Kurşun H., Gül Y., Duran İ. Maden Kenti Sivas Zirvesi-II, Sivas, Türkiye, 18 - 20 Mart 2012, ss.231-242
Toz Metalurjisi ile Üretilen ve Mermer Doğal Taş Kesmede Kullanılan Kesici Uçlara B4C İlavesinin Etkilerinin İncelenmesi Öksüz K. E., Şimşir M., Şahin Y. 6. Uluslararası Toz Metalurjisi Konferansı ve Sergisi, (6IPMC), Ankara, Türkiye, 5 - 09 Ekim 2011, cilt.1, ss.588-591, (Tam Metin Bildiri)
Investigation of the wear behavior of B4C reinforced Fe/Co matrix composites produced by hot press Şimşir M., Öksüz K. E., Şahin Y. 11th International Conference on the Mechanical Behavior of Materials (ICM), Como, İtalya, 01 Ocak 2011, cilt.10, ss.3195-3201, (Tam Metin Bildiri)
AISI 4140 ve DIN 100Cr6 Çeliklerine Fiziksel Buhar Biriktirme Yöntemi Kullanılarak Yapılmış CrN Kaplamanın Karakterizasyonu ŞİMŞİR M., KUL M., Kara M., Çil G., Volkan H. 1.Uluslararası Yüzey İşlemleri Sempozyumu, 15 - 18 Haziran 2011, ss.736-745, (Tam Metin Bildiri)
Sivas ta ki Alçıtaşı Jips Madenciliği ve Ürün Çeşitliliğinde ki Gelişmeler DURAN Z., KURŞUN H., GÜL Y., DURAN İ. Maden Kenti Zirvesi II, Sivas, Türkiye, 18 - 20 Nisan 2011, ss.231-242, (Tam Metin Bildiri)
Wear Studies on Diamond Reinforced Fe Co Based Metal Matrix Composites Öksüz K. E., Şimşir M., Şahin Y. 6th International Powder Metallurgy Conference and Exhibition (6IPMC), Ankara, Türkiye, 5 - 09 Ekim 2011, cilt.1, ss.151-158, (Tam Metin Bildiri)
Tribological Behavior of Diamond Reinforced Fe Co Composite by Taguchi Method Öksüz K. E., Şimşir M., Şahin Y. 18th International Conference on Composite Materials, Jeju-Si, Güney Kore, 21 - 26 Ağustos 2011, cilt.1, ss.1-6, (Tam Metin Bildiri)
The Effect of Process Parameters on Mechanical and Dry Wear Behavior of Aluminum Composite Şahin Y., Öksüz K. E. 6th International Powder Metallurgy Conference and Exhibition (6IPMC), Ankara, Türkiye, 5 - 09 Ekim 2011, cilt.1, ss.146-150, (Tam Metin Bildiri)
Characterization of Diamond Impregnated B4C Fe Co MMC Öksüz K. E., Şimşir M., Şahin Y. Euro PM 2011 Congress and Exhibition, Barcelona, İspanya, 9 - 12 Ekim 2011, cilt.1, ss.247-253, (Tam Metin Bildiri)
Toz Metalurjisi Yöntemiyle Üretilen ve Mermer Doğal Taş Kesmede Kullanılan Kesici Uçlara B4C İlavesinin Etkilerinin İncelenmesi ÖKSÜZ K. E., ŞİMŞİR M., ŞAHİN Y. 6th International Powder Metallurgy Conference & Exhibition, 5 - 09 Ekim 2011, ss.588-591
The Characterization of The Mechanical And Thermal Properties Of Hot-Pressed Hexagonal Boron Nitride-Titanium Diboride Composites AKARSU A. C., GÖKÇE H., BOYRAZ T., ERTUĞ B., ADDEMİR O., ÖVEÇOĞLU M. L. 3rd Int. Symposium on SiAlONs and Non-Oxides, Nevşehir, Türkiye, 01 Haziran 2010, (Tam Metin Bildiri)
Characterization of Microstructural and Physical Properties of Y2O3 Reinforced Cordierite Based Ceramic Materials GÖKÇE H., KÜÇÜK İ., BOYRAZ T., AĞAOĞULLARI D., DUMAN İ., ÖVEÇOĞLU M. L. 13. Uluslararası Malzeme Sempozyumuna (IMSP’xx2010, 13 - 15 Ekim 2010, (Tam Metin Bildiri)
Alüminyum Titanat / Forsterit Seramiklerin Mikro Yapısal ve Fiziksel Karakterizasyonu KÜÇÜK İ., GÖKÇE H., BOYRAZ T., ÖVEÇOĞLU M. L. 15. Uluslararası Metalurji ve Malzeme Kongresi, 11 - 13 Kasım 2010, ss.2210-2215
Soğuma Hızının Çelik Takviyeli Dökme Demirin Ara Yüzey Dayancı ve Mikroyapıya Etkisi ŞİMŞİR M., ÖKSÜZ K. E. 3.Isıl İşlem Sempozyumu ve Sergisi, İstanbul, Türkiye, 14 - 15 Kasım 2009, ss.52-61, (Tam Metin Bildiri)
Yozgat - Kadısehir Demir Cevherinde Naa Tekniği ile Au, Pt, Ir iz Element Taraması AKARSU A. C., BOYRAZ T., ADDEMİR O. 14. Uluslararası Metalurji ve Malzeme Kongresi, İstanbul, Türkiye, 16 - 18 Ekim 2008, ss.533-542, (Tam Metin Bildiri)
Alüminyum Titanat/Kordiyerit Seramiklerin Mekanik Özelliklerinin Karakterizasyonu GÖKÇE H., BOYRAZ T., KEÇELİ Z., ÖVEÇOĞLU M. L., ADDEMİR O. 14. Uluslararası Metalurji ve Malzeme Kongresi, İstanbul, Türkiye, 16 - 18 Ekim 2008, (Tam Metin Bildiri)
An Investigation On The Properties of nano TiB2 Reinforced Hot Pressed B4C-SiC composites AKARSU A. C., BOYRAZ T., ADDEMİR O. 2nd International World Congress On Ceramics, 29 Haziran - 04 Temmuz 2008, (Tam Metin Bildiri)
Humidity Sensitivity and Microhardness Relationship of BaTiO3 Ceramics with PMMA Additive ERTUĞ B., BOYRAZ T., ADDEMİR O. 5th international Powder Metallurgy Conference, 8 - 12 Ekim 2008, ss.1112-1122, (Tam Metin Bildiri)
La3 Katkılı BaTiO3 Bilesimlerinde Donör Katkısının Mikroyapısal Özellikler Üzerine Etkilerinin İncelenmesi ERTUĞ B., BOYRAZ T., ADDEMİR O. 14. Uluslararası Metalurji ve Malzeme Kongresi, İstanbul, Türkiye, 16 - 18 Ekim 2008, ss.1028-1033, (Tam Metin Bildiri)
Effects of B4C Addition on the Microstructural and Thermal Properties of Hot Pressed SiC Ceramic Matrix Composites KEÇELİ Z., ÖĞÜNÇ H., GÖKÇE H., BOYRAZ T., ADDEMİR O., ÖVEÇOĞLU M. L. 12th International Materials Symposium, Denizli, Türkiye, 15 - 17 Ekim 2008, ss.386-392, (Tam Metin Bildiri)
Effects of B4C Addition on the Microstructure and Mechanical Properties of Hot Pressed SiC Ceramic Matrix Composites ÖĞÜNÇ H., KEÇELİ Z., BOYRAZ T., ADDEMİR O., ÖVEÇOĞLU M. L. 2nd International World Congress On Ceramics, 29 Haziran - 04 Temmuz 2008, (Tam Metin Bildiri)
Thermal Characterization of Aluminum Titanate/ Cordierite Ceramics GÖKÇE H., BOYRAZ T., KEÇELİ Z., ÖVEÇOĞLU M. L., ADDEMİR O. 2nd International World Congress On Ceramics, 29 Haziran - 04 Temmuz 2008, (Tam Metin Bildiri)
PMMA Katkılı BaTiO3 Esaslı Nem Sensörlerinde Tepki Hızı Karakteristiklerinin İncelenmesi ERTUĞ B., BOYRAZ T., ADDEMİR O. VII. Uluslararası Katılımlı Seramik Kongresi, Türkiye, 26 - 28 Kasım 2008, ss.83-89, (Tam Metin Bildiri)
Thermal Shock Properties of Aluminium Titanate-Cordierite Ceramics Produced By PM Method GÖKÇE H., KEÇELİ Z., BOYRAZ T., HAMZAÇEBİ C., ÖVEÇOĞLU M. L. 5th international Powder Metallurgy Conference, 8 - 12 Ekim 2008, ss.1218-1225, (Tam Metin Bildiri)
Humidity Sensing Properties of lanthanum Doped Barium Titanate Ionic Conductive Ceramic Sensor ERTUĞ B., BOYRAZ T., ADDEMİR O. 5th international Powder Metallurgy Conference, 8 - 12 Ekim 2008, ss.1123-1130
B4C Partikül Takviyesinin Sıcak Preslenmis SiC Matrisli Seramik Kompozitlerin Mekanik Özellikleri Üzerindeki Etkisi ÖĞÜNÇ H., KEÇELİ Z., BOYRAZ T., ADDEMİR O., ÖVEÇOĞLU M. L. 14. Uluslararası Metalurji ve Malzeme Kongres, 16 - 18 Ekim 2008
A Research on the Effect of Kaolinite İllite Ratio in Sanitary Ware Applications ÇETİNKAYA S., GÜLER T., ÖZER A., YALÇIN H. Brinding Clays, 43rd Annual Meeting of the CMS , 67, France, 2006., Fransa, 3 - 07 Haziran 2006, (Özet Bildiri)
The Preparation and Characterization of K Feldispat Polanilin Nanocomposite ÖZER A., ÇETİNKAYA S., ŞAHİN M., SAÇAK M. Brinding Clays, 43rd Annual Meeting of the CMS , 209, France, 2006., Fransa, 3 - 07 Haziran 2006, (Özet Bildiri)
Beneficiation studies of Karanlıkdere chromite ore Kurşun H., Canbazoğlu M., Aydoğan S., Cebeci Y. 5. Int.Min.Proc.Symposium, Nevşehir, Türkiye, 6 - 08 Eylül 1994, ss.77-80, (Tam Metin Bildiri)